31
Users / Re: xine-lib and video playback issues?
« on: November 02, 2011, 05:51:13 am »
phenigma, Could you build a new update of this?
Thanks
Hernan
Thanks
Hernan
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
LinuxMCE sponsor
open.home.automation
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
32
Installation issues / Re: Failed to start X on MD (new 10.04 install)
« on: October 16, 2011, 08:55:35 am »
If you upgrade the md w/ apt-get update & apt-get upgrade.....
if that task needs to upgrade the "pluto-nvidia-drivers" package... you should note that lmce change the /etc/X11/xorg.conf file changing the
Driver from (Driver "nvidia") to (Driver "nv"), when you reboot the MD system you will see a message and you cannot see the UI2 because a openglx problem.
Try changing againg the /etc/X11/xorg.conf file to Driver "nvidia" and reboot again
Thanks
Bugui
if that task needs to upgrade the "pluto-nvidia-drivers" package... you should note that lmce change the /etc/X11/xorg.conf file changing the
Driver from (Driver "nvidia") to (Driver "nv"), when you reboot the MD system you will see a message and you cannot see the UI2 because a openglx problem.
Try changing againg the /etc/X11/xorg.conf file to Driver "nvidia" and reboot again
Thanks
Bugui
33
Installation issues / Re: Failed to start X on MD (new 10.04 install)
« on: October 11, 2011, 03:45:21 am »
I did the following procedure and i get it work.
1) Download Newest Nvidia drivers from here
2) Open module blacklist as admin
gksudo gedit /etc/modprobe.d/blacklist.conf
Add these lines and save:
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
3) Uninstall any previously installed Nvidia drivers:
sudo apt-get --purge remove nvidia-*
4) Reboot your computer
5) When an error message pops up saying that Ubuntu cannot load Nvidia drivers, choose Exit to terminal (Exit to console)
6) Login and cd to the directory where you saved your file
7)Install drivers
sudo sh NVIDIA-Linux-x86_XXXXX....
reboot MD system
1) Download Newest Nvidia drivers from here
2) Open module blacklist as admin
gksudo gedit /etc/modprobe.d/blacklist.conf
Add these lines and save:
blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv
3) Uninstall any previously installed Nvidia drivers:
sudo apt-get --purge remove nvidia-*
4) Reboot your computer
5) When an error message pops up saying that Ubuntu cannot load Nvidia drivers, choose Exit to terminal (Exit to console)
6) Login and cd to the directory where you saved your file
7)Install drivers
sudo sh NVIDIA-Linux-x86_XXXXX....
reboot MD system
34
Installation issues / Re: Need Help to set up a DSC alarm panel using PC5401 module.
« on: October 04, 2011, 01:08:52 pm »
Hi, I get integrate a PC5401 module and LinuxMCE.
I'm using a 1832 alarm panel of DSC.
It's works!!!
I will upload the changes that i did in the Power5020 template. in a couple of days.
Regards.
Bugui
I'm using a 1832 alarm panel of DSC.
It's works!!!
I will upload the changes that i did in the Power5020 template. in a couple of days.
Regards.
Bugui
35
Users / Re: CCTV or IP Camera?
« on: September 17, 2011, 09:26:55 am »
Hi purps,
I got live stream in a web browser. There are 3 types of apps inside it's internal BOA web server (ActiveX, JAVA, and Push).
I usually used push with mozilla and works, and I think that it's Motion JPEG and not still JPEG.
Take a look to this part of the webcam log. It's like it is continually downloading a file?....LMCE spects a .jpg picture and its receiving something more, like a video....
Buffer sent. <0xb4f70b90>
10 09/17/11 4:19:27.160 Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10 09/17/11 4:19:27.203 Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10 09/17/11 4:19:27.207 Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10 09/17/11 4:19:27.208 Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10 09/17/11 4:19:27.210 Closing connection to 192.168.80.201 <0xb4f70b90>
10 09/17/11 4:19:27.223 Method call ended. <0xb4f70b90>
But I read that the IPC-1002 cam supports both types of streams. I can't get information in order to change that kind of transmition.
Also, I found that the camera has some internal paramitters but i didn't touch them at this time.
Is there another kind of template based on motionJPEG ??
Thanks,
Hernan
I got live stream in a web browser. There are 3 types of apps inside it's internal BOA web server (ActiveX, JAVA, and Push).
I usually used push with mozilla and works, and I think that it's Motion JPEG and not still JPEG.
Take a look to this part of the webcam log. It's like it is continually downloading a file?....LMCE spects a .jpg picture and its receiving something more, like a video....
Buffer sent. <0xb4f70b90>
10 09/17/11 4:19:27.160 Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10 09/17/11 4:19:27.203 Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10 09/17/11 4:19:27.207 Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10 09/17/11 4:19:27.208 Receiving buffer from 192.168.80.201 with max size 16384 and timeout 5000... <0xb4f70b90>
10 09/17/11 4:19:27.210 Closing connection to 192.168.80.201 <0xb4f70b90>
10 09/17/11 4:19:27.223 Method call ended. <0xb4f70b90>
But I read that the IPC-1002 cam supports both types of streams. I can't get information in order to change that kind of transmition.
Also, I found that the camera has some internal paramitters but i didn't touch them at this time.
Is there another kind of template based on motionJPEG ??
Thanks,
Hernan
36
Users / Re: xine-lib and video playback issues?
« on: September 16, 2011, 07:01:20 am »
Thanks phenigma, that will be great.
Thanks
Bugui
Thanks
Bugui
37
Users / Re: CCTV or IP Camera?
« on: September 16, 2011, 06:59:53 am »
Hello Pnuts,
did you get the ipvillar IPCAM works ?
I buy one but I can't make it work.
There is a problem with authentication, Im using the instruction at the wiki page http://wiki.linuxmce.org/index.php/IPC-1002.
Thanks in advance.
Hernan
did you get the ipvillar IPCAM works ?
I buy one but I can't make it work.
There is a problem with authentication, Im using the instruction at the wiki page http://wiki.linuxmce.org/index.php/IPC-1002.
Thanks in advance.
Hernan
38
Users / Re: xine-lib and video playback issues?
« on: September 13, 2011, 09:15:56 am »
Hey guys,
Libxine2 works great, with the following configuration:
libxine2 and pluto-xine-player 2.0.0.44.11071324189 and lastes nvidia drivers.
Just one issue that I found was try to play a .mkv file that has video, audio, and subs tracks.
It just playback the file and you get a grey screen, the subs and audio, (you can't see the video because you will see a grey screen).
It's seams like it is related with vdpau and "pluto-xine-player 2.0.0.44.11071324189".
One thing that I tried was change the vdpau acceleration to xv, and you can see the video but it's not an intelligent solution for my Zotac HD-ID11, because the 1080p videos are unwachable.
Could someone provide to me a new version of pluto-xine-player to be used with libxine2 ?
I think that the newers version of pluto-xine could fix this issue.
Thanks in advance,
Sorry by my english,
Regards,
Hernan
Libxine2 works great, with the following configuration:
libxine2 and pluto-xine-player 2.0.0.44.11071324189 and lastes nvidia drivers.
Just one issue that I found was try to play a .mkv file that has video, audio, and subs tracks.
It just playback the file and you get a grey screen, the subs and audio, (you can't see the video because you will see a grey screen).
It's seams like it is related with vdpau and "pluto-xine-player 2.0.0.44.11071324189".
One thing that I tried was change the vdpau acceleration to xv, and you can see the video but it's not an intelligent solution for my Zotac HD-ID11, because the 1080p videos are unwachable.
Could someone provide to me a new version of pluto-xine-player to be used with libxine2 ?
I think that the newers version of pluto-xine could fix this issue.
Thanks in advance,
Sorry by my english,
Regards,
Hernan
39
Users / Re: mythtv recordings - about half aren't working
« on: September 12, 2011, 10:54:51 pm »
I'm experiencing the same issue.
LMCE 0810
Hernan
LMCE 0810
Hernan
40
Users / Re: Zotac Zbox
« on: August 16, 2011, 07:29:30 pm »
Hi,
pls check the following forum. there is an explanation about it.
http://forum.linuxmce.org/index.php/topic,10058.0.html
Regards
Hernan
pls check the following forum. there is an explanation about it.
http://forum.linuxmce.org/index.php/topic,10058.0.html
Regards
Hernan
41
Users / Re: Solved: Updates & 7970-> proxy-orbiter segfaults
« on: July 18, 2011, 08:30:11 am »
Hey now it works, what I did was:
create /usr/pluto/orbiter/bits
Reboot core
full regenerate 7970 orbiter
reload router.
Then orbiter at C7970 begins to work.
Thanks
Hernan
create /usr/pluto/orbiter/bits
Reboot core
full regenerate 7970 orbiter
reload router.
Then orbiter at C7970 begins to work.
Thanks
Hernan
42
Users / Re: Solved: Updates & 7970-> proxy-orbiter segfaults
« on: July 18, 2011, 08:22:12 am »
Hello guys,
I have the same issue with my c7970.
Also I have dpkg -l|grep pluto-proxy
ii pluto-proxy-orbiter 2.0.0.44.11071324189 <insert up to 60 chars description>
I create /usr/pluto/orbiter/bits but c7970 didn't connect.
If I do a ls for /usr/pluto/orbiter/bits i get only one directory called "174". that is the weborbiter device, the ID for 7970 orbiter is "54".
I made a full regenerate for my c7970 orbiter but nothing happens.
What can I do now?
Thanks in advance.
Hernan
I have the same issue with my c7970.
Also I have dpkg -l|grep pluto-proxy
ii pluto-proxy-orbiter 2.0.0.44.11071324189 <insert up to 60 chars description>
I create /usr/pluto/orbiter/bits but c7970 didn't connect.
If I do a ls for /usr/pluto/orbiter/bits i get only one directory called "174". that is the weborbiter device, the ID for 7970 orbiter is "54".
I made a full regenerate for my c7970 orbiter but nothing happens.
What can I do now?
Thanks in advance.
Hernan
43
Developers / Re: [Solved] Dealextreme (cheap) IP Camera help
« on: July 01, 2011, 06:18:37 pm »
Hello,
I follow the instructions at wiki (http://wiki.linuxmce.org/index.php/IPC-1002) to create a new template based on panasonic ip cam.
I can't get a picture form my IP Vilar camera (IPC-1002).
There is a part of the lmce log of this camera.
http://pastebin.lugmen.org.ar/6650
Is there someone that has this cam (IPC-1002) working?
Hernán
I follow the instructions at wiki (http://wiki.linuxmce.org/index.php/IPC-1002) to create a new template based on panasonic ip cam.
I can't get a picture form my IP Vilar camera (IPC-1002).
There is a part of the lmce log of this camera.
http://pastebin.lugmen.org.ar/6650
Is there someone that has this cam (IPC-1002) working?
Hernán
44
Users / Re: Left click on DVD menu
« on: June 29, 2011, 07:20:03 pm »
I have the same issue.
Hernán
Hernán
45
Users / Re: xine-lib and video playback issues?
« on: June 09, 2011, 06:23:16 am »
Hi,
I have PAL DVDs.
It's happens when you the movie starts, for instance... I can see the trailers ok, and after the menu area, the players stops.
Hernan
I have PAL DVDs.
It's happens when you the movie starts, for instance... I can see the trailers ok, and after the menu area, the players stops.
Hernan