Topics

Hi,

a simple question that I have not found an answer after years of trying ....
What is the correct parameter in the web admin for the standard thermostat using KNX / EIBD?

I read this on txt on svn:

Code Select Expand

Standard_Thermostat:
channel meaning:
write asked temperature | write mode | return asked temperature | return mode | return real temperature

it's correct?

and if yes

write asked temperature      ----------->  GA  2byte
write mode                        ----------->  GA  1 bit? 1 byte?
return asked temperature     ----------->  GA  2 byte
return mode                       ----------->  GA  1bit? 1 byte?
return real temperature        ----------->  GA   2 byte



Emanuele

Hi,

I'm looking for a way to turn off my touch when they are not in the room. How can I do?
I found this command from the terminal to turn on and off the monitor and they work:

Code Select Expand

sudo vbetool dpms off
sudo vbetool dpms on

Emanuele

Merry Christmas to all members and developers of LMCE forum.

Emanuele

Hello, now doing research on the net I saw that linphone supports video calls now.
I want to know if there is the possibility of implementing the video calls in the new Qorbiter for the 10.04 release.

Emanuele

hi, i have a problem with my network, i use the 2nic configuration but now eth1 is using for pppoe
connection and eth0 for the local net. Server going on internet but the client on access point no. I try a ping test from the client to the eth0 server and it's ok, a ping from client to eth1 it's ok, but a ping from client to www.google.it isn't ok.

Hello i am trying lmce 10.04.
The installation went fine, but I have problems with EIB-eibd, I installed eibd and created a script to start it and it works correctly (I tested on a groupocketlisten and groupswrite).
I installed the package lmce-EIB-eibd to replace EIB, it is registred on the router, but the lights are not driven.
I followed all the recommendations of the various pages on the wiki and forums and at this point I think is a problem with the template.
Anyone try this?

Emanuele

HI,

I wanted to add some functionality to the knx.
I read the readme file in the doc folder of the source and I am going to start work.

My intention was to create a thermostat a bit more complex with features such as: fans, mode, hating / cooling.
Also I was wondering if you could extend the scheduler to KNX thermostats and energy monitoring to a KNX device I am going to create.

Emanuele

Hello I have available a pandaboard and I would understand if it is possible to install the hari mini install.
Honestly I have not tried to do anything because I only just saw this project.
Which way should I go? I have to install Ubuntu 11.04, or by force to install debian?


Emanuele

Hi,

I have this board for other jobs, there is a chance to test it as a media director?


Emanuele

I made some changes to my system knx and upgrading LMCE 8.10, I realized that the web admin in part on the climate now there are also buttons to manage FAN, MODE, etc. ...
I have read this guide http://wiki.linuxmce.org/index.php/Climate_Plugin, but I am not clear if all these options work with the KNX and if so, how should I do with the addres group?

Sorry for my english.

Emanuele

I have problems with LCDprocClient template, LCDd daemon is running, but LCDprocClient not work. Someone managed to get it working properly with 8.10?

I have IMON LCD on Luxa2 case.

Emanuele

I'm assembling my new mini-core with ATOM ION motherboard.. I can use the wi-fi card as a second NIC?

wlan0 does not appear in the web admin, but I managed to install the drivers and make it work.

I also tried to manually edit / etc / network / interfaces by adding all the parameters necessary, but then when you restart the core resumes the configuration set in the web admin.


Emanuele

Hi,

Anyone try install the DVD_beta with an ATI video card?
I read this wiki page .. http://wiki.linuxmce.org/index.php/Display_Drivers .. but I have some problem, This page is still valid for the 8.10 beta?

when i try .. apt-get install xorg-driver-fglrx

I have this error:

Spacchetto xorg-driver-fglrx (da .../xorg-driver-fglrx_2%3a8.543-0ubuntu4.1_i386.deb) ...
dpkg-divert: `diversion of /usr/lib/libGL.so.1.2 to /usr/lib/fglrx/libGL.so.1.2.xlibmesa by xorg-driver-fglrx' è in conflitto con `diversion of /usr/lib/libGL.so.1.2 to /usr/lib/nvidia/libGL.so.1.2.xlibmesa by nvidia-glx-190'
dpkg: errore processando /var/cache/apt/archives/xorg-driver-fglrx_2%3a8.543-0ubuntu4.1_i386.deb (--unpack):
il sottoprocesso pre-installation script ha restituito un codice di errore 2
Sono occorsi degli errori processando:
/var/cache/apt/archives/xorg-driver-fglrx_2%3a8.543-0ubuntu4.1_i386.deb
E: Sub-process /usr/bin/dpkg returned an error code (1)



Emanuele

Hi,

   
I bought the TV card indicated (USB), to make it work you have to upgrade the driver V4L-DVB as it says in this guide
http://www.linuxtv.org/wiki/index.php/MSI_DigiVox_mini_II_V3.0

but when I compile this with make, gives me errors because I haven't installed a kernel 2.6.31.

I can upgrade the kernel? if so, how can I do?

or are there other possibilities in your opinion?

Emanuele

Hi

1. I have installed and functioning VDR in my hybrid/core with my HVR 1110 Hauppaugge, but I can not do the stremming to my MD.
I checked the parameters as written in the wiki, I copied the file channels.conf in MD, but still I get the message NO SIGNAL, some ideas?

2.I bought a MSI Digivox mini II v.3.0, I followed the instructions from this page:
http://www.linuxtv.org/wiki/index.php/MSI_DigiVox_mini_II_V3.0, but I do not think that the USB-DVB-T is recognized correctly (I think we need a more updated kernel) ... there are instructions to be followed for more DVB-T card in the same core?

Emanuele

ADMIN: Splitting topic to save hijacking...

Hi,

very good work Thom.

I with the Italian community (www.linuxmce-it.com), we are working on a black skin ..
here is our idea:
http://digilander.libero.it/rages2/immagini/PNG_ITA/test/testnero.png

I'm changing the skin slate as you have recommended in previous posts.
We must be able to put the text in white, however, and to change the color of the status LED for the lights on-off.

Emanuele

Hi,
I have noticed that with LinuxMCE 8.10 don't working the steps to install the drivers of 3M touch screen, then I tried to use those in reposity Ubuntu 8.10 but nothing works I have also changed xorg.conf as I was advised in a forum but does not work.
You have some ideas on what to do?

HI,


anyone tried the camera Panasonic BL-1C? This is a fixed IP camera is compatible with LinuxMCE?


Emanuele

Hi,
I read on the logitech site that configure the Squeezebox Receiver need a Squeezebox classic.
This applies even if you use LinuxMCE?
But most of all, you can use the Squeezebox Receiver with Linuxmce?

Hi,

I finally completed installation of my apartment.
I have installed a system of automation KNX (Merten) throughout the house, with an HDPC (core) and an MD 3M touchscreen 17 "whit an atom 330, everything seems to work, but I can not install the drivers "bash - DCE - KNX".

I get to point:

<sup>After DCE_PATH is set, and exported, you can build the package with this command, in the DCE-whisperer directory:

dpkg-buildpackage-b-rfakeroot-us-uc <return></sup>

   
and I have this answer:

^{dcerouter_1:/home/bash-dce-knx/bash-dce-knx/DCE-whisperer# dpkg-buildpackage -rfakeroot -b -us -uc
dpkg-buildpackage: source package is dce-whisperer
dpkg-buildpackage: source version is 1.0
dpkg-buildpackage: source changed by root <root@unknown>
dpkg-buildpackage: host architecture i386
dpkg-buildpackage: source version without epoch 1.0
dpkg-checkbuilddeps: Unmet build dependencies: debhelper (>= 5)
dpkg-buildpackage: Build dependencies/conflicts unsatisfied; aborting.
dpkg-buildpackage: (Use -d flag to override.)
dcerouter_1:/home/bash-dce-knx/bash-dce-knx/DCE-whisperer#}


Help me PLZ