Topics

1

Developers / VDR with Gyration Gyromouse

« on: April 21, 2008, 05:11:53 pm »

Hi,

at time it's impossible to handle the vdr and his buttons fully in lmce only with the Gyration Gyromouse.

Would it be possible in the future, to handle vdr full with this mouse or do I have to buy a Fiire remote.

I've buyed all my equipment in 11.2007 after watching the video an read the wiki.

regards

Thorsten

2

Users / SCREEN Resolution on ANALOG TV 16:9 100Hz (LOEWE Aventos 32")

« on: April 21, 2008, 04:43:45 pm »

Hello @ all,

sorry about my bad english!

I tried to get LMCE with an analog Loewe-TV (M2NPV-VM with S-Video/FBAS-Out to TV)

While the setup with a LOEWE Aventos 32" 16:9 100Hz CRT, I can't chose an Option for 720x576 to get the 16:9 resolution
The RGB-Out on the Break-Out from M2NPV-VM won't work with my Loewe, only S-Video/FBAS does

The Monitor got no VGA-Card internal, only SCART (one with RGB but it don't work) S-Video and S-VHS

I think I have to edit the xorg.conf, but don't know the Parameter to work with the 16:9 CRT.

What were the correct parameter for the xorg.conf to get LMCE to work with Full-Screen ?

The Bios-Entry for TV-Settings were PAL-G (Germany) and TV-Selection is AUTO (AUTO, RGB, TV)

PLEASE Help !!!

I mean Hari has also a 16:9 CRT but he has it with component-out of his board.


This Time I have only 4:3 resolution on a 16:9 CRT TV an black graphs (1") above and under the LMCE-Output.

If someone has the ANTEC Fusion 430 working with the Display and the IR which is integrated please write the detailed steps to do it


Software: LMCE 7.10 Beta 4 AMD64 (3,7GB Imge)

Hardware:
Antec Fusion 430
ASUS M2NPV-VM (Bios 1301)
AMD 3800+ EE
1x WD 38GB Raptor (LMCE)
2x 2GB Kingston Value
Technotrend S-1500 DVB-S
GPU 128MB shared (see Wiki)

Hope anbody has an idea how it could works.

Regards

Thorsten

3

Installation issues / Orbiter for Windows Mobile 5 or Windows Mobile 6

« on: January 09, 2008, 11:44:30 pm »

Hi @all,

Got 3 PDA's QTek 9000 (WM6), Qtek 9100 (WM5) and Qtek 2020 (WM2003).

Would be nice to use these Devices as an orbiter

I'm not able to get the treo-orbiter to run on these devices. Either with BT or WiFi.

Has anyone a PDA with the OS (WM2003, WM5WM6) running the Orbiter Software?

Need a HowTo for installation and confirguration am WM-Orbiter in the wizard

Can anyone help?

Thanks

zaphod

4

Installation issues / Myth and DiSEqC Settings with Quad-LNB and DiSEqC 1.0

« on: January 08, 2008, 01:06:47 am »

Hi @ all,

1st. sorry about my bad english!

 I need help to get myth to work with my SAT-Equipment.

Quad-LNB with DiSEqC 1.0 multiswitch

Pinnacle PCTV-SAT (running under MS is ok)
Hauppauge NOVA-SE seems to have a bug so the firmware must be patched.....

But in the moment the PCTV SAT is in my Antec-Case (Does anybody how to configure the iMON/VFD to use it with my pronto ru 940 to switch LMCE on/off)

Don't know the settings in the DiSEqC section of the dvb-card. Either the switch and the LNB-Settings

Here my setting of my PVR (Topfield TF5000PVR Masterpiece)

    LNB setting/Einstellung:

    Name des Satelliten         ASTRA
    Tuner Auswahl (Topfield)    2
    Verbindungsart           Einzeln (da 4 Kabel vom Multiswitch 2 zum Topfield)
    LNB Frequenz           9750/10600
    LNB Spannung          on/An
    22 kHz Schalter           off/Aus
    DiSEqC 1.1                off/Ausschalten
    DiSEqC 1.0                1 of 4

    Tuner 1                              Hotbird:   10719 / V / 27500
    Tuner 2                              ASTRA:          10788 / V / 22000


Tried the cable with a dbox2 ant Topfield -> ok.

Anyone who has a configuration like mine who can help?

Or ist it better to wait for 710 with vdr?

Thanks

zaphod

5

Installation issues / Topfield Template

« on: January 06, 2008, 11:26:14 am »

Hi @all,

Is in LMCE a template for TOPFIELD-PVR's?

Using a TOFIELD 5000 Masterpiece, all Topfield PVR's got an RS-232

A Member of Topfield Europe, "Gerti" says all PVR's could be controlled via RS-232, exept on/off.

Here is an Link of the topic

http://www.topfield-europe.com/forum/search.php?searchid=2016744

I'm using the optical out of LMCE. When the output-bar nothing happen. The Sound is still on the same level.

By playing MP'3 the songs have diffent loudness, so i have to do it manually. Is there a solution to make it like iTunes? iTunes ask to put all the songs in the DB to the same level and works fine.

Regards

zaphodB

6

Installation issues / LMCE on Analog TV 16:9 100Hz (Loewe Aventos 32")

« on: December 30, 2007, 04:30:38 pm »

Hello @ all,

sorry about my bad english!

I tried to get LMCE with an analog Loewe-TV (M2NPV-VM with S-Video/FBAS-Out to TV)

While the setup with a LOEWE Aventos 32" 16:9 100Hz CRT, I can't chose an Option for 720x576 to get the 16:9 resolution
The RGB-Out on the Break-Out from M2NPV-VM won't work with my Loewe, only S-Video/FBAS

The Monitor got no VGA-Card internal, only SCART (one with RGB but it don't work) S-Video and S-VHS

I think I have to edit the xorg.conf, but don't know the Parameter to work with the 16:9 CRT.

What were the correct parameter for the xorg.conf to get LMCE to work with Full-Screen ????

The Bios-Entry for TV-Settings were PAL-G (Germany) and TV-Selection is AUTO (AUTO, RGB, TV)

PLEASE Help !!!

I mean Hari has also a 16:9 CRT but he has it with component-out of his board.


This Time I have only 4:3 resolution on a 16:9 CRT TV an black graphs (1") above and under the LMCE-Output.

If someone has the ANTEC Fusion 430 working with the Display and the IR which is integrated please write the detailed step to do it




Hardware:
Antec Fusion 430
ASUS M2NPV-VM (Bios 1301)
AMD 3800+ EE
1x WD 38GB Raptor (LMCE)
2x 2GB Kingston Value
Technotrend S-1500 DVB-S
GPU 128MB shared (see Wiki)

Hope anbody has an idea how it could works.

Regards

Thorsten