1
Installation issues / Re: Video not playing on MD
« on: February 13, 2011, 11:34:19 pm »
I only have .mpg .avi .mkv .mp4 files.
Regards,
Regards,
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
LinuxMCE sponsor
open.home.automation
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Installation issues / Re: Video not playing on MD
« on: February 13, 2011, 10:50:23 pm »
I think this is more for audio.
Since neither audio nor video is playing I don't think it's applicable (yet). But still thanks for the input!
Regards,
Chris
Since neither audio nor video is playing I don't think it's applicable (yet). But still thanks for the input!
Regards,
Chris
3
Installation issues / Re: Video not playing on MD
« on: February 13, 2011, 10:38:16 pm »
There are no logfiles for xine/mplayer present..
Not on the core or on the MD.
How can i access samba webinterface? defaultport 901 is not working...
My storage device is ntfs is that maybe the problem?
Regards,
Chris
Not on the core or on the MD.
How can i access samba webinterface? defaultport 901 is not working...
My storage device is ntfs is that maybe the problem?
Regards,
Chris
4
Installation issues / Re: Video not playing on MD
« on: February 13, 2011, 06:14:51 pm »
Hey Beeker,
The unit has been driving us crazy as well. I am currently using snapshot 23698, after toying around for a bit everything seemed to be working fine however when I select some audio to play it will appear on the screen for about 1 second and then goes back into screensaver mode. The same applies to video only nothing appears but a black screen for approx. 1 sec and will then go back into screensaver mode. I'm really stuck so I think that waiting for 1004 is probably the best option.
Hope everything will work out fine for the both of us (as I'm sure it will in time).
Regards,
Chris
The unit has been driving us crazy as well. I am currently using snapshot 23698, after toying around for a bit everything seemed to be working fine however when I select some audio to play it will appear on the screen for about 1 second and then goes back into screensaver mode. The same applies to video only nothing appears but a black screen for approx. 1 sec and will then go back into screensaver mode. I'm really stuck so I think that waiting for 1004 is probably the best option.
Hope everything will work out fine for the both of us (as I'm sure it will in time).
Regards,
Chris
5
Installation issues / Re: Video not playing on MD
« on: February 10, 2011, 03:15:53 pm »
User setup:
I based my user setup on having a dedicated core in a PC room + a mediadirector hooked to a HMDi tv in the living area
Foxconn.......... Motherboard + 1000 Mb LAN internal NIC
P4 2.8 Ghz
756 Mb DRam
1x ..... NIC
Foxconn NetBox-nT330i
Tecnical Data:
Intel Atom 330 Prozessor 2x 1,6 GHz
NVIDIA 9400GT onBoard
Wireless LAN IEEE 802.11 b/g
6x USB 2.0
1x Gigabit-LAN
1x HDMI
1x DVI
Cardreader SD / SDHC / MS / MS Pro / MMC
Samsung HDMI tv
I can click on both video/music but whenever i do so (no matter what orbitor I use, it immediately skips back to the screensaver)
I based my user setup on having a dedicated core in a PC room + a mediadirector hooked to a HMDi tv in the living area
Foxconn.......... Motherboard + 1000 Mb LAN internal NIC
P4 2.8 Ghz
756 Mb DRam
1x ..... NIC
Foxconn NetBox-nT330i
Tecnical Data:
Intel Atom 330 Prozessor 2x 1,6 GHz
NVIDIA 9400GT onBoard
Wireless LAN IEEE 802.11 b/g
6x USB 2.0
1x Gigabit-LAN
1x HDMI
1x DVI
Cardreader SD / SDHC / MS / MS Pro / MMC
Samsung HDMI tv
I can click on both video/music but whenever i do so (no matter what orbitor I use, it immediately skips back to the screensaver)
6
Installation issues / Video not playing on MD
« on: February 09, 2011, 11:43:37 pm »
Rececently got the Foxconn nt 330i working. but when i want to play media from the core it immediately skips back to flickr...
Do any of you have any idea what could be wrong?
regards,
Chris
Do any of you have any idea what could be wrong?
regards,
Chris
7
Users / Re: PXE boot MD not working
« on: November 24, 2010, 08:04:18 pm »
ordinary kubuntu 8.10 runs like heaven.
attempt to kill init: see wiki or read my posts in the forum..
still not working here as it still hangs in splah menu
attempt to kill init: see wiki or read my posts in the forum..
still not working here as it still hangs in splah menu
8
Users / Re: PXE boot MD not working
« on: November 23, 2010, 06:13:40 pm »
already followed everything in the wiki that how i got the NIC recognized in the first place. I then had some problems with PXE boot, this was solved too. I can't quite seem to figure out what the problem could be now...
9
Users / PXE boot MD not working
« on: November 23, 2010, 01:24:05 pm »
Hi all,
I finally got my Foxconn NT330i MD to PXE boot.
However after the boot process the kubuntu bar will appear, move twice and then the MD doesn't do anything anymore.
Do you have any suggestions on what the problem could be?
Thanks in advance!
Regards,
Chris
I finally got my Foxconn NT330i MD to PXE boot.
However after the boot process the kubuntu bar will appear, move twice and then the MD doesn't do anything anymore.
Do you have any suggestions on what the problem could be?
Thanks in advance!
Regards,
Chris
10
Users / Re: PXE boot won't work
« on: November 05, 2010, 10:32:09 am »
Yeah I thought so as well but I already followed every step there. In the beginning I had a kernel panic which I solved by following the steps in http://wiki.linuxmce.org/index.php/Unrecognized_NIC post. Now after I boot everything seems to be working fine but when the Kubuntu progress bar is showing, it will move twice and stop completely
.
.
11
Users / PXE boot won't work
« on: November 04, 2010, 12:07:39 am »
Hey you guys,
When I PXE boot the MD everything seems to be working fine during the initial stages.
Then afterwards when the Kubuntu progress bar is showing, it will move twice and stop completely .
Do you have any suggestions because I'm out. Tried adding driver to modules and rebuilding image on core, didn't work.
Any help would be welcome.
System hardware core:
Centrino core2 duo
756mb dram (512+256)
60 GB hd
100mbit network
System hardcore MD:
Foxconn NT330i
1gb ddr2 ram
120 gb hd
Regards,
Chris
When I PXE boot the MD everything seems to be working fine during the initial stages.
Then afterwards when the Kubuntu progress bar is showing, it will move twice and stop completely .
Do you have any suggestions because I'm out. Tried adding driver to modules and rebuilding image on core, didn't work.
Any help would be welcome.
System hardware core:
Centrino core2 duo
756mb dram (512+256)
60 GB hd
100mbit network
System hardcore MD:
Foxconn NT330i
1gb ddr2 ram
120 gb hd
Regards,
Chris
12
Users / Re: Foxconn NetBox-nT330i as MediaDirector
« on: November 03, 2010, 12:31:38 am »
if you face any problems on install..
dont untar the file in the home dir!
cd /
mkdir AR81Family
chmod 777 AR81Family
(upload newest tar to dir)
tar zxvf xxx.tar.gz
sudo su
make install
modprobe atl1c
exit
dont untar the file in the home dir!
cd /
mkdir AR81Family
chmod 777 AR81Family
(upload newest tar to dir)
tar zxvf xxx.tar.gz
sudo su
make install
modprobe atl1c
exit
13
Users / Re: Foxconn NetBox-nT330i as MediaDirector
« on: October 28, 2010, 11:24:14 pm »
better just upload the newest driver AR81Family-linux-v1.0.1.4.tar to the core
sudo tar xvf AR81Family-linux-v1.0.1.4.tar
sudo make install
sudo nano /etc/initramfs-tools-interactor/modules
add line atl1c
sudo /usr/pluto/bin/Diskless_BuildDefaultImage.sh
sudo mkinitramfs -d /etc/initramfs-tools-interactor/ -o /tftpboot/default/initrd
reboot md
done
sudo tar xvf AR81Family-linux-v1.0.1.4.tar
sudo make install
sudo nano /etc/initramfs-tools-interactor/modules
add line atl1c
sudo /usr/pluto/bin/Diskless_BuildDefaultImage.sh
sudo mkinitramfs -d /etc/initramfs-tools-interactor/ -o /tftpboot/default/initrd
reboot md
done
Pages: [1]