Messages

1

Users / Re: Dchp

« on: March 24, 2009, 02:48:58 am »

hmmm yeah something seems to have gone awry...

root@dcerouter:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 00:1A:70:14:BD:21
          inet addr:208.93.207.153  Bcast:208.93.207.255  Mask:255.255.254.0
          inet6 addr: fe80::21a:70ff:fe14:bd21/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1221 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1737 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:1266315 (1.2 MB)  TX bytes:188411 (183.9 KB)
          Interrupt:21 Base address:0x6000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:3452 errors:0 dropped:0 overruns:0 frame:0
          TX packets:3452 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:1851224 (1.7 MB)  TX bytes:1851224 (1.7 MB)

2

Developers / Re: Java/ J2ME mobile orbiter

« on: January 10, 2009, 10:39:35 pm »

I had to edit the manifest in the either the jar or jad to match each other to get it to work with my phone. If i remember properly, the cldc in one of them was incorrect and one other thing. Bottom line they need to match;)

3

Users / Zwave lighting floorplan

« on: January 09, 2009, 05:02:33 pm »

Hi guys,

I had all my Zwave devices controllable via the floorplan up until I added an event handler to my living room lights.  Now my family room lights disappeared from the floorplan.  When i go to the floorplan in pluto-admin, the family room device is not even listed, so i can't just drag and drop it back on the floorplan.  nothing was deleted, only an event was added.  All devices are still controllable by the autogenerated on/off scenarios, but do not show up on the floorplan anymore.  By the way, i swapped out the old zwave driver to see if it would solve the issue.  What took place and how do i fix it?

4

Developers / Re: Java/ J2ME mobile orbiter

« on: October 19, 2008, 03:25:37 am »

hi guys,

I did a little research in regards to javamo compatibility.  I was directed to this page https://developer.sprint.com/view_devices.do?device=79542#, which lists the samsung instinct as have the attributes listed below.  The problem is that I can easily upload jar/jad applications to the phone without error, but when trying to do so with the javmo jar/jad files i get "invalid content" and an error code of 907.  any suggestions would be appreciated.  with this phone you can not transfer the file to the phone via usb cable. any input??? thank you guys in advance 

j2me characteristics:
Java support (Yes/No) Yes
Java Version (list) v3.1 Partial
Sprint J2ME Requirements (v 3.0, 3.1) v3.1 Partial
Sprint Application Management System (AMS) Requirement (v 3.0, 3.1) v3.1 Partial
Audio Codec Support (audio/) audio/midi,audio/mpeg,audio/qcelp,audio/x-wav,audio/acc,audio/amr, wma
Canvas Display size (Height x Width) 240 x 412
Device Classification (Vision/Camera/Multimedia/Business) Multimedia
External LCD Size (Height x Width) No
Full Screen Display size (Height x Width) 240 x 432
Image Capture type (JPEG/BMP/PNG/etc.) JPEG
Input Capabilities (Keypad, Qwerty, Touch Screen) Touch Screen
Java Heap Size (KB) 15 Mbytes
Key press simultaneously (Yes/No) No
Maximum Image Capture Resolution (height x width) 240 x 412
MIDlet can run in background (Yes/No) Yes
MIDP 1.0 / CLDC 1.0 (Yes/No) No
MIDP 2.0 / CLDC 1.1 (Yes/No) Yes
Minimum Image Capture Resolution (height x width) 240 x 320, 96*128 in Java
Protocol Support (http, https, rtsp, etc.) Http, Https, RTSP
Restrictions on JAR size (KB) Unlimited
Runtime Memory (KB) 15 Mbytes (max 5 apps)
Usable Pixel dimensions (w x h) 240 x 432
Video Codec Support (video/) video/x-pmd,video/mp4
Optional supported Java packages
JSR-75 (File Connection) (Yes/No) Yes
JSR-75 (PIM) (Yes/No) Yes
JSR-82 (Bluetooth) (Yes/No) Yes
JSR-118 (required for Vision devices) (Yes/No) Yes
JSR-120 (Text Message) (Yes/No) Yes
JSR-135 (MultiMedia) (Yes/No) Yes
JSR-139 (CLDC) (required for Vision devices) (Yes/No) Yes
JSR-177 (Security-Crypto) (Yes/No) Yes
JSR-179 (location API) (Yes/No) Yes
JSR-184 (3D-graphics) (Yes/No) No
JSR-185 (JTWI) (Yes/No) Yes
JSR-205 (WMA 2.0) (Yes/No) No
JSR-211 (Content Handler) (Yes/No) No
JSR-226 (Scalable vector graphics) (Yes/No) Yes
JSR-234 (Advanced Mobile Media API) (Yes/No) Yes
JSR-248 (MSA SubSet) (Yes/No) Yes(except JSR 205, JSR184)
JSR-248 (MSA Full Stack) (Yes/No) No
MVM (Multi-tasking Virtual Machine) (Yes/No) TBD
MVM or Single Instance VM: TBD
QJAE (Yes/No) Yes
Qualcomm Location API (Yes/No) Yes
Sprint PCS Java Class Extensions (v1.3, 2.0, 2.1) 2.2
Sprint Device Status API (Yes/No) Yes
Sprint Device External LCD API (Yes/No) Yes
Sprint Media v1.0 Extension (Yes/No) Yes
Sprint Muglet v1.0 Extension (Yes/No) Yes
Sprint System v1.0 Extension (Yes/No) Yes
Sprint System v2.0 Extension (Yes/No) Yes
Sprint System v2.1 Extension (Yes/No) Yes
Sprint Location Extension API (Yes/No) Yes

5

Users / WAYNE-DALTON Z-WAVE® THERMOSTAT

« on: July 23, 2008, 01:54:01 am »

Hi guys,

There is not anything in the wiki or elsewhere about the WAYNE-DALTON Z-WAVE® THERMOSTAT that i can find.  Anybody know anything about it, such as linuxmce support or perhapes one around the same price point? 

Thanks.


http://www.homecontrols.com/cgi-bin/main/co_disp/displ/prrfnbr/12155/sesent/00/Wayne-Dalton-Z-Wave-Thermostat

6

Users / is it possible

« on: June 06, 2008, 04:08:45 am »

Build a decent performing media director for video/audio for under $150, is it possible?  What hardware would be suggested, taking into consideration form factor as a priority??? I understand that intel mini-itx mainboards such as the J9F2 would be prefered over via boards but the cost is also an issue. any input???

7

Users / Re: z wave

« on: May 12, 2008, 09:58:21 pm »

i must reinstall the os, please check your inbox.

8

Users / Re: z wave

« on: May 12, 2008, 09:36:27 pm »

ok, give me one min, thanks

9

Users / Re: z wave

« on: May 12, 2008, 09:19:36 pm »

hey thanks, I'll give you remote access all you want if you can please help me out, i'm losing my mind. tell me how and have it. thanks in advance

10

Users / Re: z wave

« on: May 12, 2008, 08:55:42 pm »

hi thanks, i have to ha22 now but it needs the SPCP8x5_Driver_Installation correct? i'm having trouble with the installation, i have given up on it.  When i get to copying from the master controller in the wizard, the wizard does not copy it.  I did once and never worked again.  I reset both the controller and the ha22 after trying them out in windows,   Installed the drivers which was was a headache and i still couldn't do it properly i believed because i can't load to spcp8x5.ko file.  As a matter of fact i was doing everything out of the home folder instead of /tmp because every command i put in came up no file exists.  so i was hoping i could just buy a plug and play interface? 

11

Users / z wave

« on: May 12, 2008, 08:40:28 pm »

Are there any z wave interfaces that work out of the box, without having to add any drivers?

12

Users / Re: Please help!!!

« on: May 09, 2008, 11:42:55 pm »

thanks for taking the time out to help me, i appreciate it.  i did this in konsole...

linuxmce@dcerouter:~$  sudo apt-get install subversion

it seemed to work, after doing so i typed

linuxmce@dcerouter:~$ linuxmce@dcerouter:/tmp$ svn co http://svn.charonmedia.org/svn/vendor/spcp8x5

all i got was no such file or directory

what am i doing wrong?

13

Users / Re: Intermatic Ha22 usb stick

« on: May 09, 2008, 09:51:49 pm »

Get the driver
Check out the driver from the repository:

linuxmce@dcerouter:/tmp$ svn co http://svn.charonmedia.org/svn/vendor/spcp8x5
A    spcp8x5/spcp8x5.c
A    spcp8x5/Makefile
Checked out revision 1512.

14

Users / Please help!!!

« on: May 09, 2008, 09:48:46 pm »

I'm a newbie in linuxmce with kubuntu.  I have been trying to get my z wave usb ha22 stick working.....but i'm stuck at this part listed in on one of these posts

Get the driver
Check out the driver from the repository:

linuxmce@dcerouter:/tmp$ svn co http://svn.charonmedia.org/svn/vendor/spcp8x5
A    spcp8x5/spcp8x5.c
A    spcp8x5/Makefile
Checked out revision 1512.

I typed it into konsole, it is telling me no such file or directory

please tell me directions in layman's terms