1
Users / Re: MythTv > HDPVR Trying to set channel?
« on: September 11, 2012, 05:49:19 pm »
i ran through the setup wizard again. but i am still seeing the same result above. what can i do now?
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
LinuxMCE sponsor
open.home.automation
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Users / Re: MythTv > HDPVR Trying to set channel?
« on: September 11, 2012, 05:14:54 pm »
i am not understanding what your saying? my hdpvr is setup and working. i cant get mythv to work.
3
Users / MythTv > HDPVR Trying to set channel?
« on: September 11, 2012, 03:22:34 pm »
this is my first time trying to get mythtv to work so i am not sure if this is correct. i have a cable box and HDPVR. im on version 1004. i am not trying to have linuxmce change channels. Outside mythv i have a "live tv" button on the orbiter that seems to play off the hdpvr just fine so i know the hdpvr is working.
i followed these directions from the hdpvr wiki on mythv.
Enter option 4, "Input Connections." Connect the video source to the appropriate input on the HD-PVR. Important Note: You must set a channel change script for the HD-PVR to work properly. If you don't care about channel changes, you can set it to /bin/true, but there absolutely must be a channel change script defined. Important note 2: You must leave Preset tuner to channel empty or LiveTV and channel changes will not work.
but when i press TV i see this in logs. After that linuxmce suggests i reset the mythtv backend.
==> mythbackend.log <==
2012-09-11 09:12:34.228 MainServer::ANN Monitor
2012-09-11 09:12:34.239 adding: dcerouter as a client (events: 0)
2012-09-11 09:12:34.245 MainServer::ANN Monitor
2012-09-11 09:12:34.251 adding: dcerouter as a client (events: 1)
2012-09-11 09:12:34.922 MainServer::ANN Playback
2012-09-11 09:12:34.935 adding: dcerouter as a client (events: 0)
2012-09-11 09:12:34.942 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:12:34.949 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:34.953 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:12:34.959 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:12:34.965 TVRec(1): HW Tuner: 1->1
2012-09-11 09:12:35.012 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:35.019 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:12:35.025 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:12:45.101 MainServer::ANN Playback
2012-09-11 09:12:45.111 adding: dcerouter as a client (events: 0)
2012-09-11 09:12:45.119 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:12:45.125 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:45.129 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:12:45.135 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:12:45.141 TVRec(1): HW Tuner: 1->1
2012-09-11 09:12:45.188 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:45.195 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:12:45.201 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:12:55.251 MainServer::ANN Playback
2012-09-11 09:12:55.276 adding: dcerouter as a client (events: 0)
2012-09-11 09:12:55.283 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:12:55.290 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:55.294 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:12:55.300 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:12:55.306 TVRec(1): HW Tuner: 1->1
2012-09-11 09:12:55.352 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:55.354 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:12:55.360 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:13:05.425 MainServer::ANN Playback
2012-09-11 09:13:05.434 adding: dcerouter as a client (events: 0)
2012-09-11 09:13:05.442 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:13:05.448 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:05.452 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:13:05.484 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:13:05.494 TVRec(1): HW Tuner: 1->1
2012-09-11 09:13:05.541 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:05.548 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:13:05.554 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:13:13.623 MainServer::ANN Playback
2012-09-11 09:13:13.715 adding: dcerouter as a client (events: 0)
2012-09-11 09:13:13.722 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:13:13.729 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:13.733 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:13:13.739 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:13:13.745 TVRec(1): HW Tuner: 1->1
2012-09-11 09:13:13.836 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:13.853 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:13:13.859 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:13:23.782 MainServer::ANN Playback
2012-09-11 09:13:23.795 adding: dcerouter as a client (events: 0)
2012-09-11 09:13:23.802 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:13:23.809 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:23.813 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:13:23.819 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:13:23.825 TVRec(1): HW Tuner: 1->1
2012-09-11 09:13:23.939 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:23.945 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:13:23.951 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:16:43.630 AutoExpire: CalcParams(): Max required Free Space: 10.0 GB w/freq: 15 min
i followed these directions from the hdpvr wiki on mythv.
Enter option 4, "Input Connections." Connect the video source to the appropriate input on the HD-PVR. Important Note: You must set a channel change script for the HD-PVR to work properly. If you don't care about channel changes, you can set it to /bin/true, but there absolutely must be a channel change script defined. Important note 2: You must leave Preset tuner to channel empty or LiveTV and channel changes will not work.
but when i press TV i see this in logs. After that linuxmce suggests i reset the mythtv backend.
==> mythbackend.log <==
2012-09-11 09:12:34.228 MainServer::ANN Monitor
2012-09-11 09:12:34.239 adding: dcerouter as a client (events: 0)
2012-09-11 09:12:34.245 MainServer::ANN Monitor
2012-09-11 09:12:34.251 adding: dcerouter as a client (events: 1)
2012-09-11 09:12:34.922 MainServer::ANN Playback
2012-09-11 09:12:34.935 adding: dcerouter as a client (events: 0)
2012-09-11 09:12:34.942 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:12:34.949 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:34.953 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:12:34.959 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:12:34.965 TVRec(1): HW Tuner: 1->1
2012-09-11 09:12:35.012 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:35.019 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:12:35.025 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:12:45.101 MainServer::ANN Playback
2012-09-11 09:12:45.111 adding: dcerouter as a client (events: 0)
2012-09-11 09:12:45.119 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:12:45.125 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:45.129 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:12:45.135 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:12:45.141 TVRec(1): HW Tuner: 1->1
2012-09-11 09:12:45.188 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:45.195 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:12:45.201 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:12:55.251 MainServer::ANN Playback
2012-09-11 09:12:55.276 adding: dcerouter as a client (events: 0)
2012-09-11 09:12:55.283 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:12:55.290 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:55.294 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:12:55.300 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:12:55.306 TVRec(1): HW Tuner: 1->1
2012-09-11 09:12:55.352 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:12:55.354 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:12:55.360 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:13:05.425 MainServer::ANN Playback
2012-09-11 09:13:05.434 adding: dcerouter as a client (events: 0)
2012-09-11 09:13:05.442 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:13:05.448 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:05.452 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:13:05.484 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:13:05.494 TVRec(1): HW Tuner: 1->1
2012-09-11 09:13:05.541 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:05.548 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:13:05.554 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:13:13.623 MainServer::ANN Playback
2012-09-11 09:13:13.715 adding: dcerouter as a client (events: 0)
2012-09-11 09:13:13.722 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:13:13.729 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:13.733 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:13:13.739 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:13:13.745 TVRec(1): HW Tuner: 1->1
2012-09-11 09:13:13.836 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:13.853 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:13:13.859 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:13:23.782 MainServer::ANN Playback
2012-09-11 09:13:23.795 adding: dcerouter as a client (events: 0)
2012-09-11 09:13:23.802 TVRec(1): Changing from None to WatchingLiveTV
2012-09-11 09:13:23.809 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:23.813 ChannelBase(1): IsTunable(Component,1) Failed to find channel in DB on input '2'
2012-09-11 09:13:23.819 ChannelBase(1) Error: Setting start channel '1' failed,
and we failed to find any suitible channels on any input.
2012-09-11 09:13:23.825 TVRec(1): HW Tuner: 1->1
2012-09-11 09:13:23.939 GetChannelData() failed because it could not
find channel number '1' in DB for source '2'.
2012-09-11 09:13:23.945 TVRec(1) Error: Failed to set channel to 1. Reverting to kState_None
2012-09-11 09:13:23.951 TVRec(1): Changing from WatchingLiveTV to None
2012-09-11 09:16:43.630 AutoExpire: CalcParams(): Max required Free Space: 10.0 GB w/freq: 15 min
4
Users / Re: Asterisk + Google Voice
« on: August 27, 2012, 11:05:51 pm »
i tried to configure iax2 and have a similar result.
[Aug 27 17:04:33] WARNING[10993]: pbx_impl/ast/ast108.c:1159 sccp_wrapper_asterisk18_request: remote audio caps: (nothing)
[Aug 27 17:04:33] WARNING[10993]: pbx_impl/ast/ast108.c:1162 sccp_wrapper_asterisk18_request: remote video caps: (nothing)
-- SCCP/ does not exist!
[Aug 27 17:04:33] WARNING[10993]: pbx_impl/ast/ast108.c:1172 sccp_wrapper_asterisk18_request: SCCP: sccp_requestChannel Status not Successfull
[Aug 27 17:04:33] NOTICE[10993]: channel.c:5325 __ast_request_and_dial: Unable to request channel SCCP/
-- Executing [failed@trusted:1] Macro("OutgoingSpoolFailed", "dialout-trunk,IAX2/2016051440,ailed,,")
-- Executing [s@macro-dialout-trunk:1] Set("OutgoingSpoolFailed", "DIAL_TRUNK=IAX2/2016051440") in new stack
-- Executing [s@macro-dialout-trunk:2] Set("OutgoingSpoolFailed", "DIAL_NUMBER=ailed") in new stack
-- Executing [s@macro-dialout-trunk:3] Set("OutgoingSpoolFailed", "ROUTE_PASSWD=") in new stack
-- Executing [s@macro-dialout-trunk:4] GotoIf("OutgoingSpoolFailed", "1?noauth") in new stack
-- Goto (macro-dialout-trunk,s,6)
-- Executing [s@macro-dialout-trunk:6] GotoIf("OutgoingSpoolFailed", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:7] Set("OutgoingSpoolFailed", "_NODEST=") in new stack
-- Executing [s@macro-dialout-trunk:8] Set("OutgoingSpoolFailed", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:9] Set("OutgoingSpoolFailed", "GROUP()=DIAL_TRUNK") in new stack
-- Executing [s@macro-dialout-trunk:10] Macro("OutgoingSpoolFailed", "user-callerid,SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("OutgoingSpoolFailed", "user-callerid: ") in new stack
-- Executing [s@macro-user-callerid:2] Set("OutgoingSpoolFailed", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("OutgoingSpoolFailed", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] GotoIf("OutgoingSpoolFailed", "0?start") in new stack
-- Executing [s@macro-user-callerid:5] Set("OutgoingSpoolFailed", "REALCALLERIDNUM=") in new stack
-- Executing [s@macro-user-callerid:6] NoOp("OutgoingSpoolFailed", "REALCALLERIDNUM is ") in new stack
-- Executing [s@macro-user-callerid:7] Set("OutgoingSpoolFailed", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:8] Set("OutgoingSpoolFailed", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("OutgoingSpoolFailed", "1?report") in new stack
-- Goto (macro-user-callerid,s,13)
-- Executing [s@macro-user-callerid:13] NoOp("OutgoingSpoolFailed", "TTL: ARG1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("OutgoingSpoolFailed", "1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("OutgoingSpoolFailed", "Using CallerID "" <>") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("OutgoingSpoolFailed", "record-enable,,OUT") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("OutgoingSpoolFailed", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("OutgoingSpoolFailed", "recordingcheck,20120827-170433,1346101473.464") in new stack
-- Launched AGI Script /usr/share/asterisk/agi-bin/recordingcheck
recordingcheck,20120827-170433,1346101473.464: No AMPUSER db entry for . Not recording
-- <OutgoingSpoolFailed>AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] NoOp("OutgoingSpoolFailed", "No recording needed") in new stack
-- Executing [s@macro-dialout-trunk:12] GotoIf("OutgoingSpoolFailed", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("OutgoingSpoolFailed", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:14] Macro("OutgoingSpoolFailed", "outbound-callerid,IAX2/2016051440") in new stack
-- Executing [s@macro-outbound-callerid:1] GotoIf("OutgoingSpoolFailed", "0?start") in new stack
-- Executing [s@macro-outbound-callerid:2] Set("OutgoingSpoolFailed", "REALCALLERIDNUM=") in new stack
-- Executing [s@macro-outbound-callerid:3] NoOp("OutgoingSpoolFailed", "REALCALLERIDNUM is ") in new stack
-- Executing [s@macro-outbound-callerid:4] GotoIf("OutgoingSpoolFailed", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,9)
-- Executing [s@macro-outbound-callerid:9] Set("OutgoingSpoolFailed", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:10] Set("OutgoingSpoolFailed", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:11] Set("OutgoingSpoolFailed", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:12] GotoIf("OutgoingSpoolFailed", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,16)
-- Executing [s@macro-outbound-callerid:16] GotoIf("OutgoingSpoolFailed", "1?usercid") in new stack
-- Goto (macro-outbound-callerid,s,18)
-- Executing [s@macro-outbound-callerid:18] GotoIf("OutgoingSpoolFailed", "1?report") in new stack
-- Goto (macro-outbound-callerid,s,22)
-- Executing [s@macro-outbound-callerid:22] NoOp("OutgoingSpoolFailed", "CallerID set to "" <>") in new stack
-- Executing [s@macro-dialout-trunk:15] GotoIf("OutgoingSpoolFailed", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s@macro-dialout-trunk:17] Set("OutgoingSpoolFailed", "OUTNUM=ailed") in new stack
-- Executing [s@macro-dialout-trunk:18] Set("OutgoingSpoolFailed", "custom=IAX2/2016051440") in new stack
-- Executing [s@macro-dialout-trunk:19] GotoIf("OutgoingSpoolFailed", "1?gocall") in new stack
-- Goto (macro-dialout-trunk,s,22)
-- Executing [s@macro-dialout-trunk:22] GotoIf("OutgoingSpoolFailed", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:23] Dial("OutgoingSpoolFailed", "IAX2/2016051440/ailed,300,") in new stack
-- Called IAX2/2016051440/ailed
[Aug 27 17:04:33] WARNING[10993]: pbx_impl/ast/ast108.c:1159 sccp_wrapper_asterisk18_request: remote audio caps: (nothing)
[Aug 27 17:04:33] WARNING[10993]: pbx_impl/ast/ast108.c:1162 sccp_wrapper_asterisk18_request: remote video caps: (nothing)
-- SCCP/ does not exist!
[Aug 27 17:04:33] WARNING[10993]: pbx_impl/ast/ast108.c:1172 sccp_wrapper_asterisk18_request: SCCP: sccp_requestChannel Status not Successfull
[Aug 27 17:04:33] NOTICE[10993]: channel.c:5325 __ast_request_and_dial: Unable to request channel SCCP/
-- Executing [failed@trusted:1] Macro("OutgoingSpoolFailed", "dialout-trunk,IAX2/2016051440,ailed,,")
-- Executing [s@macro-dialout-trunk:1] Set("OutgoingSpoolFailed", "DIAL_TRUNK=IAX2/2016051440") in new stack
-- Executing [s@macro-dialout-trunk:2] Set("OutgoingSpoolFailed", "DIAL_NUMBER=ailed") in new stack
-- Executing [s@macro-dialout-trunk:3] Set("OutgoingSpoolFailed", "ROUTE_PASSWD=") in new stack
-- Executing [s@macro-dialout-trunk:4] GotoIf("OutgoingSpoolFailed", "1?noauth") in new stack
-- Goto (macro-dialout-trunk,s,6)
-- Executing [s@macro-dialout-trunk:6] GotoIf("OutgoingSpoolFailed", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:7] Set("OutgoingSpoolFailed", "_NODEST=") in new stack
-- Executing [s@macro-dialout-trunk:8] Set("OutgoingSpoolFailed", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:9] Set("OutgoingSpoolFailed", "GROUP()=DIAL_TRUNK") in new stack
-- Executing [s@macro-dialout-trunk:10] Macro("OutgoingSpoolFailed", "user-callerid,SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("OutgoingSpoolFailed", "user-callerid: ") in new stack
-- Executing [s@macro-user-callerid:2] Set("OutgoingSpoolFailed", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("OutgoingSpoolFailed", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] GotoIf("OutgoingSpoolFailed", "0?start") in new stack
-- Executing [s@macro-user-callerid:5] Set("OutgoingSpoolFailed", "REALCALLERIDNUM=") in new stack
-- Executing [s@macro-user-callerid:6] NoOp("OutgoingSpoolFailed", "REALCALLERIDNUM is ") in new stack
-- Executing [s@macro-user-callerid:7] Set("OutgoingSpoolFailed", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:8] Set("OutgoingSpoolFailed", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("OutgoingSpoolFailed", "1?report") in new stack
-- Goto (macro-user-callerid,s,13)
-- Executing [s@macro-user-callerid:13] NoOp("OutgoingSpoolFailed", "TTL: ARG1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("OutgoingSpoolFailed", "1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("OutgoingSpoolFailed", "Using CallerID "" <>") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("OutgoingSpoolFailed", "record-enable,,OUT") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("OutgoingSpoolFailed", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("OutgoingSpoolFailed", "recordingcheck,20120827-170433,1346101473.464") in new stack
-- Launched AGI Script /usr/share/asterisk/agi-bin/recordingcheck
recordingcheck,20120827-170433,1346101473.464: No AMPUSER db entry for . Not recording
-- <OutgoingSpoolFailed>AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] NoOp("OutgoingSpoolFailed", "No recording needed") in new stack
-- Executing [s@macro-dialout-trunk:12] GotoIf("OutgoingSpoolFailed", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("OutgoingSpoolFailed", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:14] Macro("OutgoingSpoolFailed", "outbound-callerid,IAX2/2016051440") in new stack
-- Executing [s@macro-outbound-callerid:1] GotoIf("OutgoingSpoolFailed", "0?start") in new stack
-- Executing [s@macro-outbound-callerid:2] Set("OutgoingSpoolFailed", "REALCALLERIDNUM=") in new stack
-- Executing [s@macro-outbound-callerid:3] NoOp("OutgoingSpoolFailed", "REALCALLERIDNUM is ") in new stack
-- Executing [s@macro-outbound-callerid:4] GotoIf("OutgoingSpoolFailed", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,9)
-- Executing [s@macro-outbound-callerid:9] Set("OutgoingSpoolFailed", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:10] Set("OutgoingSpoolFailed", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:11] Set("OutgoingSpoolFailed", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:12] GotoIf("OutgoingSpoolFailed", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,16)
-- Executing [s@macro-outbound-callerid:16] GotoIf("OutgoingSpoolFailed", "1?usercid") in new stack
-- Goto (macro-outbound-callerid,s,18)
-- Executing [s@macro-outbound-callerid:18] GotoIf("OutgoingSpoolFailed", "1?report") in new stack
-- Goto (macro-outbound-callerid,s,22)
-- Executing [s@macro-outbound-callerid:22] NoOp("OutgoingSpoolFailed", "CallerID set to "" <>") in new stack
-- Executing [s@macro-dialout-trunk:15] GotoIf("OutgoingSpoolFailed", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s@macro-dialout-trunk:17] Set("OutgoingSpoolFailed", "OUTNUM=ailed") in new stack
-- Executing [s@macro-dialout-trunk:18] Set("OutgoingSpoolFailed", "custom=IAX2/2016051440") in new stack
-- Executing [s@macro-dialout-trunk:19] GotoIf("OutgoingSpoolFailed", "1?gocall") in new stack
-- Goto (macro-dialout-trunk,s,22)
-- Executing [s@macro-dialout-trunk:22] GotoIf("OutgoingSpoolFailed", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:23] Dial("OutgoingSpoolFailed", "IAX2/2016051440/ailed,300,") in new stack
-- Called IAX2/2016051440/ailed
5
when a command is issues to smartlink (on / off, etc). the command works as expected. but i get a few time outs that delay any further commands. does anyone have any ideas?
05 08/24/12 18:38:25.999 #### Pre-Process Queue = 1 <0xb5962b70>
05 08/24/12 18:38:26.035 _QueueProc Pre - 193 : 0 <0xb7765b70>
05 08/24/12 18:38:26.035 GSD-Sleep Pre 193 : 0 <0xb7765b70>
05 08/24/12 18:38:26.035 Process Queue = 1 <0xb7765b70>
(***):------dce--- cmdID:193, cmdFrom:0, cmdTo:127, cmdType:1, Priority:1
(***):SndIns:Queue:1
(***):out:02 62 1D 3D 29 0F 13 00 Length:8
(***):From:127
(***):current State:0
(***):Wanted State:0
(***):ReportStatus: device:127 Status:0
05 08/24/12 18:38:26.231 GSD-Sleep Post 193 : 0 <0xb7765b70>
05 08/24/12 18:38:26.231 _QueueProc Post - 193 : 0 <0xb7765b70>
(***):IN:02 62 1D 3D 29 0F 13 00 06 Length:9
(***):Command Stalled! resetting and retrying
(***):Current Command:19
(***):SndIns:Queue:1
(***):out:02 62 1D 3D 29 0F 13 00 Length:8
(***):IN:02 62 1D 3D 29 0F 13 00 06 Length:9
(***):Command Stalled! resetting and retrying
(***):Current Command:19
(***):SndIns:Queue:1
(***):out:02 62 1D 3D 29 0F 13 00 Length:8
(***):IN:02 62 1D 3D 29 0F 13 00 06 Length:9
(***):Third attempt, Failing Command!
(***):Command Completed.
(***):Queue Empty.
(***):RERUN Not needed
(***):report not needed
05 08/24/12 18:38:25.999 #### Pre-Process Queue = 1 <0xb5962b70>
05 08/24/12 18:38:26.035 _QueueProc Pre - 193 : 0 <0xb7765b70>
05 08/24/12 18:38:26.035 GSD-Sleep Pre 193 : 0 <0xb7765b70>
05 08/24/12 18:38:26.035 Process Queue = 1 <0xb7765b70>
(***):------dce--- cmdID:193, cmdFrom:0, cmdTo:127, cmdType:1, Priority:1
(***):SndIns:Queue:1
(***):out:02 62 1D 3D 29 0F 13 00 Length:8
(***):From:127
(***):current State:0
(***):Wanted State:0
(***):ReportStatus: device:127 Status:0
05 08/24/12 18:38:26.231 GSD-Sleep Post 193 : 0 <0xb7765b70>
05 08/24/12 18:38:26.231 _QueueProc Post - 193 : 0 <0xb7765b70>
(***):IN:02 62 1D 3D 29 0F 13 00 06 Length:9
(***):Command Stalled! resetting and retrying
(***):Current Command:19
(***):SndIns:Queue:1
(***):out:02 62 1D 3D 29 0F 13 00 Length:8
(***):IN:02 62 1D 3D 29 0F 13 00 06 Length:9
(***):Command Stalled! resetting and retrying
(***):Current Command:19
(***):SndIns:Queue:1
(***):out:02 62 1D 3D 29 0F 13 00 Length:8
(***):IN:02 62 1D 3D 29 0F 13 00 06 Length:9
(***):Third attempt, Failing Command!
(***):Command Completed.
(***):Queue Empty.
(***):RERUN Not needed
(***):report not needed
6
Users / Re: Pioneer VSX-1020
« on: August 25, 2012, 12:37:58 am »
i do not see a template for vsx-1020
8
Users / Asterisk + Google Voice
« on: August 23, 2012, 03:59:33 am »
i am not very familiar with asterisk. please help.
i see a connection to my account
core1*CLI> jabber show connections
Jabber Users and their status:
[asterisk] myusername@gmail.com/Talk - Connected
----
Number of users: 1
when i try to place a call i see this output in asterisk -rvvvvvvvv
also advanced > configuraiton > phones setup comes back with 404 not found /admin/
core1*CLI>
core1*CLI>
[Aug 22 21:57:05] WARNING[26903]: pbx_impl/ast/ast108.c:1159 sccp_wrapper_asterisk18_request: remote audio caps: (nothing)
[Aug 22 21:57:05] WARNING[26903]: pbx_impl/ast/ast108.c:1162 sccp_wrapper_asterisk18_request: remote video caps: (nothing)
-- SCCP/ does not exist!
[Aug 22 21:57:05] WARNING[26903]: pbx_impl/ast/ast108.c:1172 sccp_wrapper_asterisk18_request: SCCP: sccp_requestChannel Status not Successfull
[Aug 22 21:57:05] NOTICE[26903]: channel.c:5325 __ast_request_and_dial: Unable to request channel SCCP/
-- Executing [failed@trusted:1] Macro("OutgoingSpoolFailed", "dialout-trunk,GTALK/myusername@gmail.com,ailed@voice.google.com,,")
-- Executing [s@macro-dialout-trunk:1] Set("OutgoingSpoolFailed", "DIAL_TRUNK=GTALK/myusername@gmail.com") in new stack
-- Executing [s@macro-dialout-trunk:2] Set("OutgoingSpoolFailed", "DIAL_NUMBER=ailed@voice.google.com") in new stack
-- Executing [s@macro-dialout-trunk:3] Set("OutgoingSpoolFailed", "ROUTE_PASSWD=") in new stack
-- Executing [s@macro-dialout-trunk:4] GotoIf("OutgoingSpoolFailed", "1?noauth") in new stack
-- Goto (macro-dialout-trunk,s,6)
-- Executing [s@macro-dialout-trunk:6] GotoIf("OutgoingSpoolFailed", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:7] Set("OutgoingSpoolFailed", "_NODEST=") in new stack
-- Executing [s@macro-dialout-trunk:8] Set("OutgoingSpoolFailed", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:9] Set("OutgoingSpoolFailed", "GROUP()=DIAL_TRUNK") in new stack
-- Executing [s@macro-dialout-trunk:10] Macro("OutgoingSpoolFailed", "user-callerid,SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("OutgoingSpoolFailed", "user-callerid: ") in new stack
-- Executing [s@macro-user-callerid:2] Set("OutgoingSpoolFailed", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("OutgoingSpoolFailed", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] GotoIf("OutgoingSpoolFailed", "0?start") in new stack
-- Executing [s@macro-user-callerid:5] Set("OutgoingSpoolFailed", "REALCALLERIDNUM=") in new stack
-- Executing [s@macro-user-callerid:6] NoOp("OutgoingSpoolFailed", "REALCALLERIDNUM is ") in new stack
-- Executing [s@macro-user-callerid:7] Set("OutgoingSpoolFailed", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:8] Set("OutgoingSpoolFailed", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("OutgoingSpoolFailed", "1?report") in new stack
-- Goto (macro-user-callerid,s,13)
-- Executing [s@macro-user-callerid:13] NoOp("OutgoingSpoolFailed", "TTL: ARG1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("OutgoingSpoolFailed", "1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("OutgoingSpoolFailed", "Using CallerID "" <>") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("OutgoingSpoolFailed", "record-enable,,OUT") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("OutgoingSpoolFailed", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("OutgoingSpoolFailed", "recordingcheck,20120822-215705,1345687025.32") in new stack
-- Launched AGI Script /usr/share/asterisk/agi-bin/recordingcheck
recordingcheck,20120822-215705,1345687025.32: No AMPUSER db entry for . Not recording
-- <OutgoingSpoolFailed>AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] NoOp("OutgoingSpoolFailed", "No recording needed") in new stack
-- Executing [s@macro-dialout-trunk:12] GotoIf("OutgoingSpoolFailed", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("OutgoingSpoolFailed", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:14] Macro("OutgoingSpoolFailed", "outbound-callerid,GTALK/myusername@gmail.com") in new stack
-- Executing [s@macro-outbound-callerid:1] GotoIf("OutgoingSpoolFailed", "0?start") in new stack
-- Executing [s@macro-outbound-callerid:2] Set("OutgoingSpoolFailed", "REALCALLERIDNUM=") in new stack
-- Executing [s@macro-outbound-callerid:3] NoOp("OutgoingSpoolFailed", "REALCALLERIDNUM is ") in new stack
-- Executing [s@macro-outbound-callerid:4] GotoIf("OutgoingSpoolFailed", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,9)
-- Executing [s@macro-outbound-callerid:9] Set("OutgoingSpoolFailed", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:10] Set("OutgoingSpoolFailed", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:11] Set("OutgoingSpoolFailed", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:12] GotoIf("OutgoingSpoolFailed", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,16)
-- Executing [s@macro-outbound-callerid:16] GotoIf("OutgoingSpoolFailed", "1?usercid") in new stack
-- Goto (macro-outbound-callerid,s,18)
-- Executing [s@macro-outbound-callerid:18] GotoIf("OutgoingSpoolFailed", "1?report") in new stack
-- Goto (macro-outbound-callerid,s,22)
-- Executing [s@macro-outbound-callerid:22] NoOp("OutgoingSpoolFailed", "CallerID set to "" <>") in new stack
-- Executing [s@macro-dialout-trunk:15] GotoIf("OutgoingSpoolFailed", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s@macro-dialout-trunk:17] Set("OutgoingSpoolFailed", "OUTNUM=ailed@voice.google.com") in new stack
-- Executing [s@macro-dialout-trunk:18] Set("OutgoingSpoolFailed", "custom=GTALK/myusername@gmail.com") in new stack
-- Executing [s@macro-dialout-trunk:19] GotoIf("OutgoingSpoolFailed", "1?gocall") in new stack
-- Goto (macro-dialout-trunk,s,22)
-- Executing [s@macro-dialout-trunk:22] GotoIf("OutgoingSpoolFailed", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:23] Dial("OutgoingSpoolFailed", "GTALK/myusername@gmail.com/ailed@voice.google.com,300,") in new stack
OOOOH domain = myusername
-- Called GTALK/myusername@gmail.com/ailed@voice.google.com
-- Gtalk/ailed@voice.google.com-ebd1 is ringing
[Aug 22 21:57:05] WARNING[26903]: channel.c:4650 ast_prod: Prodding channel 'OutgoingSpoolFailed' failed
[Aug 22 21:57:05] WARNING[26903]: channel.c:1094 ast_best_codec: Don't know any of 0x0 (nothing) formats
== Spawn extension (macro-dialout-trunk, s, 23) exited non-zero on 'OutgoingSpoolFailed' in macro 'dialout-trunk'
== Spawn extension (trusted, failed, 1) exited non-zero on 'OutgoingSpoolFailed'
-- Executing [h@trusted:1] Macro("OutgoingSpoolFailed", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("OutgoingSpoolFailed", "w") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("OutgoingSpoolFailed", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("OutgoingSpoolFailed", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("OutgoingSpoolFailed", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("OutgoingSpoolFailed", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("OutgoingSpoolFailed", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'OutgoingSpoolFailed' in macro 'hangupcall'
== Spawn extension (trusted, h, 1) exited non-zero on 'OutgoingSpoolFailed'
core1*CLI>
i see a connection to my account
core1*CLI> jabber show connections
Jabber Users and their status:
[asterisk] myusername@gmail.com/Talk - Connected
----
Number of users: 1
when i try to place a call i see this output in asterisk -rvvvvvvvv
also advanced > configuraiton > phones setup comes back with 404 not found /admin/
core1*CLI>
core1*CLI>
[Aug 22 21:57:05] WARNING[26903]: pbx_impl/ast/ast108.c:1159 sccp_wrapper_asterisk18_request: remote audio caps: (nothing)
[Aug 22 21:57:05] WARNING[26903]: pbx_impl/ast/ast108.c:1162 sccp_wrapper_asterisk18_request: remote video caps: (nothing)
-- SCCP/ does not exist!
[Aug 22 21:57:05] WARNING[26903]: pbx_impl/ast/ast108.c:1172 sccp_wrapper_asterisk18_request: SCCP: sccp_requestChannel Status not Successfull
[Aug 22 21:57:05] NOTICE[26903]: channel.c:5325 __ast_request_and_dial: Unable to request channel SCCP/
-- Executing [failed@trusted:1] Macro("OutgoingSpoolFailed", "dialout-trunk,GTALK/myusername@gmail.com,ailed@voice.google.com,,")
-- Executing [s@macro-dialout-trunk:1] Set("OutgoingSpoolFailed", "DIAL_TRUNK=GTALK/myusername@gmail.com") in new stack
-- Executing [s@macro-dialout-trunk:2] Set("OutgoingSpoolFailed", "DIAL_NUMBER=ailed@voice.google.com") in new stack
-- Executing [s@macro-dialout-trunk:3] Set("OutgoingSpoolFailed", "ROUTE_PASSWD=") in new stack
-- Executing [s@macro-dialout-trunk:4] GotoIf("OutgoingSpoolFailed", "1?noauth") in new stack
-- Goto (macro-dialout-trunk,s,6)
-- Executing [s@macro-dialout-trunk:6] GotoIf("OutgoingSpoolFailed", "0?disabletrunk,1") in new stack
-- Executing [s@macro-dialout-trunk:7] Set("OutgoingSpoolFailed", "_NODEST=") in new stack
-- Executing [s@macro-dialout-trunk:8] Set("OutgoingSpoolFailed", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:9] Set("OutgoingSpoolFailed", "GROUP()=DIAL_TRUNK") in new stack
-- Executing [s@macro-dialout-trunk:10] Macro("OutgoingSpoolFailed", "user-callerid,SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:1] NoOp("OutgoingSpoolFailed", "user-callerid: ") in new stack
-- Executing [s@macro-user-callerid:2] Set("OutgoingSpoolFailed", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:3] GotoIf("OutgoingSpoolFailed", "0?report") in new stack
-- Executing [s@macro-user-callerid:4] GotoIf("OutgoingSpoolFailed", "0?start") in new stack
-- Executing [s@macro-user-callerid:5] Set("OutgoingSpoolFailed", "REALCALLERIDNUM=") in new stack
-- Executing [s@macro-user-callerid:6] NoOp("OutgoingSpoolFailed", "REALCALLERIDNUM is ") in new stack
-- Executing [s@macro-user-callerid:7] Set("OutgoingSpoolFailed", "AMPUSER=") in new stack
-- Executing [s@macro-user-callerid:8] Set("OutgoingSpoolFailed", "AMPUSERCIDNAME=") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("OutgoingSpoolFailed", "1?report") in new stack
-- Goto (macro-user-callerid,s,13)
-- Executing [s@macro-user-callerid:13] NoOp("OutgoingSpoolFailed", "TTL: ARG1: SKIPTTL") in new stack
-- Executing [s@macro-user-callerid:14] GotoIf("OutgoingSpoolFailed", "1?continue") in new stack
-- Goto (macro-user-callerid,s,23)
-- Executing [s@macro-user-callerid:23] NoOp("OutgoingSpoolFailed", "Using CallerID "" <>") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("OutgoingSpoolFailed", "record-enable,,OUT") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("OutgoingSpoolFailed", "0?2:4") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] AGI("OutgoingSpoolFailed", "recordingcheck,20120822-215705,1345687025.32") in new stack
-- Launched AGI Script /usr/share/asterisk/agi-bin/recordingcheck
recordingcheck,20120822-215705,1345687025.32: No AMPUSER db entry for . Not recording
-- <OutgoingSpoolFailed>AGI Script recordingcheck completed, returning 0
-- Executing [s@macro-record-enable:5] NoOp("OutgoingSpoolFailed", "No recording needed") in new stack
-- Executing [s@macro-dialout-trunk:12] GotoIf("OutgoingSpoolFailed", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:13] Set("OutgoingSpoolFailed", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:14] Macro("OutgoingSpoolFailed", "outbound-callerid,GTALK/myusername@gmail.com") in new stack
-- Executing [s@macro-outbound-callerid:1] GotoIf("OutgoingSpoolFailed", "0?start") in new stack
-- Executing [s@macro-outbound-callerid:2] Set("OutgoingSpoolFailed", "REALCALLERIDNUM=") in new stack
-- Executing [s@macro-outbound-callerid:3] NoOp("OutgoingSpoolFailed", "REALCALLERIDNUM is ") in new stack
-- Executing [s@macro-outbound-callerid:4] GotoIf("OutgoingSpoolFailed", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,9)
-- Executing [s@macro-outbound-callerid:9] Set("OutgoingSpoolFailed", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:10] Set("OutgoingSpoolFailed", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:11] Set("OutgoingSpoolFailed", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:12] GotoIf("OutgoingSpoolFailed", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,16)
-- Executing [s@macro-outbound-callerid:16] GotoIf("OutgoingSpoolFailed", "1?usercid") in new stack
-- Goto (macro-outbound-callerid,s,18)
-- Executing [s@macro-outbound-callerid:18] GotoIf("OutgoingSpoolFailed", "1?report") in new stack
-- Goto (macro-outbound-callerid,s,22)
-- Executing [s@macro-outbound-callerid:22] NoOp("OutgoingSpoolFailed", "CallerID set to "" <>") in new stack
-- Executing [s@macro-dialout-trunk:15] GotoIf("OutgoingSpoolFailed", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,17)
-- Executing [s@macro-dialout-trunk:17] Set("OutgoingSpoolFailed", "OUTNUM=ailed@voice.google.com") in new stack
-- Executing [s@macro-dialout-trunk:18] Set("OutgoingSpoolFailed", "custom=GTALK/myusername@gmail.com") in new stack
-- Executing [s@macro-dialout-trunk:19] GotoIf("OutgoingSpoolFailed", "1?gocall") in new stack
-- Goto (macro-dialout-trunk,s,22)
-- Executing [s@macro-dialout-trunk:22] GotoIf("OutgoingSpoolFailed", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:23] Dial("OutgoingSpoolFailed", "GTALK/myusername@gmail.com/ailed@voice.google.com,300,") in new stack
OOOOH domain = myusername
-- Called GTALK/myusername@gmail.com/ailed@voice.google.com
-- Gtalk/ailed@voice.google.com-ebd1 is ringing
[Aug 22 21:57:05] WARNING[26903]: channel.c:4650 ast_prod: Prodding channel 'OutgoingSpoolFailed' failed
[Aug 22 21:57:05] WARNING[26903]: channel.c:1094 ast_best_codec: Don't know any of 0x0 (nothing) formats
== Spawn extension (macro-dialout-trunk, s, 23) exited non-zero on 'OutgoingSpoolFailed' in macro 'dialout-trunk'
== Spawn extension (trusted, failed, 1) exited non-zero on 'OutgoingSpoolFailed'
-- Executing [h@trusted:1] Macro("OutgoingSpoolFailed", "hangupcall") in new stack
-- Executing [s@macro-hangupcall:1] ResetCDR("OutgoingSpoolFailed", "w") in new stack
-- Executing [s@macro-hangupcall:2] NoCDR("OutgoingSpoolFailed", "") in new stack
-- Executing [s@macro-hangupcall:3] GotoIf("OutgoingSpoolFailed", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,6)
-- Executing [s@macro-hangupcall:6] GotoIf("OutgoingSpoolFailed", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] GotoIf("OutgoingSpoolFailed", "1?theend") in new stack
-- Goto (macro-hangupcall,s,11)
-- Executing [s@macro-hangupcall:11] Hangup("OutgoingSpoolFailed", "") in new stack
== Spawn extension (macro-hangupcall, s, 11) exited non-zero on 'OutgoingSpoolFailed' in macro 'hangupcall'
== Spawn extension (trusted, h, 1) exited non-zero on 'OutgoingSpoolFailed'
core1*CLI>
9
Users / Re: Insteon Smartlinc 2412N
« on: August 15, 2012, 05:01:12 am »
never mind! the directions are perfect. i just needed to reboot!!
10
Users / Insteon Smartlinc 2412N
« on: August 14, 2012, 11:25:39 pm »
I am trying to get the Insteon Smartlink 2412N working form the directions provided in.
http://wiki.linuxmce.org/index.php/Insteon_-_Setting_Up_PLM_Template
The template is Plug and Play, configuration should have been taken care of for you.
Goto LinuxMCE Admin Website-->Wizard-->Devices-->Interfaces
Add device-->Template Id 1932 Insteon PLM
For 2412N
Add device -->Template Id 2197 Smartlinc
in addition to that i have set the ip address and mac address inside the template.
the device does not register. there is no log file for the device. if i try to send command or reset the device i get the following in:
==> DCERouter.log <==
08 08/14/12 17:23:09.504 Received Message from 0 (unknown / ) to 83 (Smartlinc / ), type 1 id 373 Command:Private Method Listing, retry none, parameters: <0x5a19ab70>
05 08/14/12 17:23:09.504 The target device 83 (routed to 83) has not registered. <0xb7758b70>
05 08/14/12 17:23:09.554 Socket::ReceiveData 0xa6a61f28 failed, bytes left 0 start: 15760000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 164 Incoming_Conn Socket 164 127.0.0.1 <0x5a19ab70>
05 08/14/12 17:23:09.554 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 164 127.0.0.1 <0x5a19ab70>
05 08/14/12 17:23:09.554 TCPIP: Closing connection to -1003 (Router Dev #0) 0xa6a61f28 m_Socket: -1 <0x5a19ab70>
05 08/14/12 17:23:09.554 Router::RemoveAndDeleteSocket 0xa6a61f28 -1003 <0x5a19ab70>
can someone please point me in the right direction?
http://wiki.linuxmce.org/index.php/Insteon_-_Setting_Up_PLM_Template
The template is Plug and Play, configuration should have been taken care of for you.
Goto LinuxMCE Admin Website-->Wizard-->Devices-->Interfaces
Add device-->Template Id 1932 Insteon PLM
For 2412N
Add device -->Template Id 2197 Smartlinc
in addition to that i have set the ip address and mac address inside the template.
the device does not register. there is no log file for the device. if i try to send command or reset the device i get the following in:
==> DCERouter.log <==
08 08/14/12 17:23:09.504 Received Message from 0 (unknown / ) to 83 (Smartlinc / ), type 1 id 373 Command:Private Method Listing, retry none, parameters: <0x5a19ab70>
05 08/14/12 17:23:09.504 The target device 83 (routed to 83) has not registered. <0xb7758b70>
05 08/14/12 17:23:09.554 Socket::ReceiveData 0xa6a61f28 failed, bytes left 0 start: 15760000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 164 Incoming_Conn Socket 164 127.0.0.1 <0x5a19ab70>
05 08/14/12 17:23:09.554 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 164 127.0.0.1 <0x5a19ab70>
05 08/14/12 17:23:09.554 TCPIP: Closing connection to -1003 (Router Dev #0) 0xa6a61f28 m_Socket: -1 <0x5a19ab70>
05 08/14/12 17:23:09.554 Router::RemoveAndDeleteSocket 0xa6a61f28 -1003 <0x5a19ab70>
can someone please point me in the right direction?
11
Users / Re: Mailx Send Email
« on: August 02, 2012, 09:24:06 pm »
is mailx not used by 0810 also?
12
Users / Re: Mailx Send Email
« on: August 02, 2012, 08:31:04 pm »
it looks like the remote mail server was failing sender verification because the FROM address is root@dcerouter.org. i whitelisted my home ip on the email server for now. now i need to look at how to change root@dcerouter.org to the actual email address. Inside Wizard > Email Setup my from address is setup correctly.
Aug 2 13:46:07 dcerouter postfix/smtp[10303]: 2B62142028C0: to=<my@emailhere.com>, relay=myrelayhere.net[123.123.123.123]:25, delay=0.49, delays=0.15/0/0.17/0.16, dsn=5.0.0, status=bounced (host myrelayhere.net[123.123.123.123] said: 550-Verification failed for <root@dcerouter.org> 550-The mail server could not deliver mail to root@dcerouter.org. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command))
Aug 2 13:46:07 dcerouter postfix/smtp[10303]: 2B62142028C0: to=<my@emailhere.com>, relay=myrelayhere.net[123.123.123.123]:25, delay=0.49, delays=0.15/0/0.17/0.16, dsn=5.0.0, status=bounced (host myrelayhere.net[123.123.123.123] said: 550-Verification failed for <root@dcerouter.org> 550-The mail server could not deliver mail to root@dcerouter.org. The account or domain may not exist, they may be blacklisted, or missing the proper dns entries. 550 Sender verify failed (in reply to RCPT TO command))
13
Users / Re: Mailx Send Email
« on: August 02, 2012, 08:12:34 pm »
OK! im fixed. saw the error in maillog form postfix that was an easy fix. the Mailx in wiki had me going in the wrong direction. thanks for the help Thom!
just to recap for anyone else having trouble in 1004
step 1.
Wizard > basic info > Email setup
make sure this is working. try to configure your PC with outlook and the same settings and test there first.
Test if it works.
Home > My Devices > Core > DCERouter > General Info Plug-in > send command to device > Send Mail
if it does not work.....
test directly in command line:
mail -v test@test.com
Subject: asdf
just add a period and enter after this line
.
EOT
Mail Delivery Status Report will be mailed to <root>.
see if postfix is running
pstree | grep master
|-master-+-pickup
logs go watch.
/var/log/pluto/DCERouter.log
/var/log/mail.log
/var/log/syslog
just to recap for anyone else having trouble in 1004
step 1.
Wizard > basic info > Email setup
make sure this is working. try to configure your PC with outlook and the same settings and test there first.
Test if it works.
Home > My Devices > Core > DCERouter > General Info Plug-in > send command to device > Send Mail
if it does not work.....
test directly in command line:
mail -v test@test.com
Subject: asdf
just add a period and enter after this line
.
EOT
Mail Delivery Status Report will be mailed to <root>.
see if postfix is running
pstree | grep master
|-master-+-pickup
logs go watch.
/var/log/pluto/DCERouter.log
/var/log/mail.log
/var/log/syslog
14
Users / Re: Mailx Send Email
« on: August 02, 2012, 07:09:44 pm »
link removed! sorry!
tried with general info plugin. (general info plugin is registered)
==> DCERouter.log <==
08 08/02/12 13:07:11.551 Received Message from 0 (unknown / ) to 4 (General Info Plug-in / Living Room/Family Room), type 1 id 1075 Command:Send Email, retry none, parameters: <0x5e9a0b70>
08 08/02/12 13:07:11.551 Parameter 282(To): my@email.com <0x5e9a0b70>
08 08/02/12 13:07:11.551 Parameter 283(Subject): test <0x5e9a0b70>
08 08/02/12 13:07:11.551 Parameter 284(MessageBody): test <0x5e9a0b70>
05 08/02/12 13:07:11.601 Socket::ReceiveData 0x9a089d10 failed, bytes left 0 start: 8230000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 161 Incoming_Conn Socket 161 127.0.0.1 <0x5e9a0b70>
05 08/02/12 13:07:11.601 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 161 127.0.0.1 <0x5e9a0b70>
05 08/02/12 13:07:11.601 TCPIP: Closing connection to -1003 (Router Dev #0) 0x9a089d10 m_Socket: -1 <0x5e9a0b70>
05 08/02/12 13:07:11.601 Router::RemoveAndDeleteSocket 0x9a089d10 -1003 <0x5e9a0b70>
==> webExecLog.log <==
02-08-2012 13:07:11 /usr/pluto/bin/MessageSend localhost 0 4 1 1075 282 "mike@interserver.net" 283 "test" 284 "test"
tried with general info plugin. (general info plugin is registered)
==> DCERouter.log <==
08 08/02/12 13:07:11.551 Received Message from 0 (unknown / ) to 4 (General Info Plug-in / Living Room/Family Room), type 1 id 1075 Command:Send Email, retry none, parameters: <0x5e9a0b70>
08 08/02/12 13:07:11.551 Parameter 282(To): my@email.com <0x5e9a0b70>
08 08/02/12 13:07:11.551 Parameter 283(Subject): test <0x5e9a0b70>
08 08/02/12 13:07:11.551 Parameter 284(MessageBody): test <0x5e9a0b70>
05 08/02/12 13:07:11.601 Socket::ReceiveData 0x9a089d10 failed, bytes left 0 start: 8230000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 161 Incoming_Conn Socket 161 127.0.0.1 <0x5e9a0b70>
05 08/02/12 13:07:11.601 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 161 127.0.0.1 <0x5e9a0b70>
05 08/02/12 13:07:11.601 TCPIP: Closing connection to -1003 (Router Dev #0) 0x9a089d10 m_Socket: -1 <0x5e9a0b70>
05 08/02/12 13:07:11.601 Router::RemoveAndDeleteSocket 0x9a089d10 -1003 <0x5e9a0b70>
==> webExecLog.log <==
02-08-2012 13:07:11 /usr/pluto/bin/MessageSend localhost 0 4 1 1075 282 "mike@interserver.net" 283 "test" 284 "test"
15
Users / Re: Mailx Send Email
« on: August 02, 2012, 06:09:26 pm »
the binary is not there. i symlinked it to /usr/bin/mailx . same result. it does not register.
==> DCERouter.log <==
05 08/02/12 12:06:14.803 The target device 49 (routed to 49) has not registered. <0x5e9a0b70>
05 08/02/12 12:06:14.853 Socket::ReceiveData 0x9a089d10 failed, bytes left 0 start: 6580000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 161 Incoming_Conn Socket 161 127.0.0.1 <0x5e9a0b70>
05 08/02/12 12:06:14.854 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 161 127.0.0.1 <0x5e9a0b70>
05 08/02/12 12:06:14.854 TCPIP: Closing connection to -1003 (Router Dev #0) 0x9a089d10 m_Socket: -1 <0x5e9a0b70>
05 08/02/12 12:06:14.854 Router::RemoveAndDeleteSocket 0x9a089d10 -1003 <0x5e9a0b70>
==> DCERouter.log <==
05 08/02/12 12:06:14.803 The target device 49 (routed to 49) has not registered. <0x5e9a0b70>
05 08/02/12 12:06:14.853 Socket::ReceiveData 0x9a089d10 failed, bytes left 0 start: 6580000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 161 Incoming_Conn Socket 161 127.0.0.1 <0x5e9a0b70>
05 08/02/12 12:06:14.854 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 161 127.0.0.1 <0x5e9a0b70>
05 08/02/12 12:06:14.854 TCPIP: Closing connection to -1003 (Router Dev #0) 0x9a089d10 m_Socket: -1 <0x5e9a0b70>
05 08/02/12 12:06:14.854 Router::RemoveAndDeleteSocket 0x9a089d10 -1003 <0x5e9a0b70>
Pages: [1] 2