Messages

1

Installation issues / Re: Failed to setup X - Intel GMA 3650

« on: June 06, 2012, 08:25:00 pm »

Hi L3mce,

you're right would be faster in IRC!  And yes that was all what was returned on the command line.

But now I've deleted every MD - after that I do a apt-get update & upgrade and then rerun the DisklessCreateTBZ.

Till now everything looks extrem fine. The MD come up with the right resolution (fullscreen) ....

  

2

Installation issues / Re: Failed to setup X - Intel GMA 3650

« on: June 06, 2012, 10:29:46 am »

Hi l3mce,

lspci of the MD is:

root@moon35:~# lspci -nn | grep 'VGA'

Code: [Select]

00:12.0 VGA compatible controller [0300]: NVIDIA Corporation C68 [GeForce 7050 PV / nForce 630a] [10de:053b] (rev a2)
after running through the wizard the "Device section" of xorg.con on the core (usr/pluto/diskless/35/etc/X11) looks like this:


Identifier      "Card0"
        VendorName      "Unknown Vendor Name"
        BoardName       "Unknown Board Name"
        Option          "LinearAlloc"           "16384"
        Option "XvmcUsesTextures" "true"
        Option "renderAccel" "true"
        Option "NoDDCValue"
        Option "UseEDID" "true"
        Option "ExactModeTimingsDVI" "true"
        Option "NoBandWidthTest" "true"
        Option "ModeValidation" "NoDFPNativeResolutionCheck, NoEdidMaxPClkCheck, NoMaxPClkCheck, AllowInterlac$
        Option "DynamicTwinView" "false"
        Option "UseEvents" "true"
        Option "AllowGLXWithComposite" "true"
        Option "AddARGBGLXVisuals" "true"
        Driver  "fbdev"
        Option  "NoLogo"        "True"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional



The core is now a headless one with the installer from the DVD - and seems to be working fine.

Code: [Select]

dcerouter_1029014:~# lspci -nn | grep 'VGA'
00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:0be2] (rev 09)
Thanks
Axel

3

Installation issues / Re: Failed to setup X - Intel GMA 3650

« on: June 05, 2012, 07:03:08 pm »

Hi,

now I'm a step closer to the target ...

The MD come's up and I run through the AVWizard. Everything fine so far. But when the onscreen Orbiter is loaded it only uses the half of the resolution. Looks like the window is not set to full screen!

 

Ok, in the xorg.conf the driver ist set to "fbdev" - when I change it to NVIDIA the "failed to setup X" error is back ....

4

Installation issues / Re: Failed to setup X - Intel GMA 3650

« on: June 01, 2012, 02:52:09 pm »

Hi Jamo,

I looked also in the /etc/X11 folder on the core and the xorg.conf is missing

Result of lspci on the MD:
00:12.0 VGA compatible controller: nVidia Corporation C68 [GeForce 7050 PV / nForce 630a] (rev a2)

5

Installation issues / Re: Failed to setup X - Intel GMA 3650

« on: June 01, 2012, 11:54:49 am »

Hi,

now I´ve done a headless install and can connect via ssh+http. Now I tried to setup with the first MD but now I get the same Message (failed to setup X). This MD has an Geforce card and it worked before. . .

Any suggestions?

Thanks
Axel

btw: there is no xorg.conf file in the diskless directory (usr/pluto/diskless ...)


. . .  the same happens with the other MD´s . . . seems to be a problem with the core??

6

Installation issues / Failed to setup X - Intel GMA 3650

« on: May 30, 2012, 09:22:08 pm »

Hi,

I tried to install 10.04 (DVD install) an a D2700DC Board with GMA3650 graphic - but stuck at the start of the AVWizard with "Failed to setup X" (when I login to ALT+F1 and startx everything is fine)

Im searching the forum and found some topic´s, one with the description of the back port drivers. I follow the found instructions but never the less without luck.

I want to build my new core with that board, so I could do a headless install - but it would be nicer to have a hybrid install.

So any tips for handling this problem?

Thanks
Axel

7

Users / Re: How to - Aeon Laps Energy Meter (Clamps) with Datalogger Plugin

« on: May 07, 2012, 11:41:11 pm »

Ok,
now I've added "Power Usage Changed Edit #85" to the multilevel sensor Template and wenn I look at the Datalogger Plugin I can see the Power consumption but the scale is Kilo Watts and Not Watts!

 idea?

8

Users / Re: How to - Aeon Laps Energy Meter (Clamps) with Datalogger Plugin

« on: May 07, 2012, 09:53:58 pm »

Hi Jase,

I'm not very familiar with LinuxMCE. Tried to get LinuxMCE working with Version 7.10 but without successs  !
Now I've installed 10.04 and nearly everthing works fine. So I will give LMCE a second chance  .

In the Wiki I've found this: "Aeon_Labs_Energy_Meter" (not allowed to post links)?
So ist seems to me that LMCE support this Power Clamp.

...

9

Users / How to - Aeon Laps Energy Meter (Clamps) with Datalogger Plugin

« on: May 07, 2012, 12:06:01 pm »

Hi,

is there somewhere a "how to" to get the Aeon Laps Energy Meter working. I´ve searched the forum and find some topics but could not get really into it.

The Energy meter is registered as a Z-Wave climate sensor and I´ve installed the Datalogger Plugin so far . . . but what have I to do now?

Thanks for your help! ;-)

Axel
-----------------
LinuxMCE 10.04