Messages

1

Installation issues / Re: Re: Dianemo S12.04 Raid 5

« on: December 17, 2012, 01:49:11 am »

Hi uplink

I missed that bit. I'll rebuild it again tomorrow.

Thsnks

Barry

Sent from my GT-N7100 using Tapatalk 2

2

Installation issues / Dianemo S12.04 Raid 5

« on: December 16, 2012, 07:13:22 pm »

Hi

I'm trying to set up a 3 x 2tb raid 5 array.

I've followed the wiki page  http://wiki.linuxmce.org/index.php/Create_RAID_in_LMCE and it creates /dev/md0 ok, but after a reboot it is replaced with /dev/md127. and in web admin /dev/md0's status is damaged.

Does anyone have any ideas how to fix it?

Thanks

Barry

3

Installation issues / Re: MythTv FAILED: xmltv returned error code 256

« on: July 21, 2011, 06:22:27 pm »

Hi RayBe

I've looked back through my logs and the error I got was.

Failed to write to /root/.xmltv/cache/1fb4ec9170c25a9b69bb9bd7efee0b90.tmp30530

So what I did was,

sudo chmod a+rwx /root/.xmltv/cache
sudo chmod a+rwx /root/.xmltv/cache/*

What folders do you have in /root/,xmltv/

Baz

4

Installation issues / Re: MythTv FAILED: xmltv returned error code 256

« on: July 20, 2011, 06:21:01 pm »

Hi RayBe

I changed the permissions of just the file which gave me the error and mythfilldatabase has been updating every night for the past few months without any more errors.

sudo chmod 777 /root/.xmltv/program_cache.tmp

Bazza

5

Installation issues / Re: MythTv FAILED: xmltv returned error code 256

« on: July 20, 2011, 12:42:12 am »

Hi RayBe

Dont know if this is any help or not but when mythfilldatabase has thrown up errors for me ive checked /var/log/mythtv/mythbackend.log which usually tells me where the problem is, as Purps said it usually turned out to be a permissions problem, so I change permissions and it runs fine afterwards

6

Installation issues / Re: Dianemo

« on: July 15, 2011, 10:23:22 pm »

Hi Andrew

How did the updates to mythtv go, I've been using mythfrontend/xbmc to the Dianemo backend for live tv and video which is working well but I'm back to trying to get it all running through the MM.

Is there any packages I need to download.

Thanks

Barry

7

Marketplace / Re: Dianemo 10.10 Systems from CHT - Now Shipping World Wide!

« on: June 21, 2011, 10:16:08 pm »

Hi Andrew

Could you tell me how much your sky multiroom kit is or tell me what i would need to connect 2 skyhd boxes to my NC30.

Thanks

Barry

8

Users / Re: DVB Headers/Drivers

« on: March 17, 2011, 06:46:36 pm »

Hi Barney

I tried to compile sasc-ng from the same guide a while ago under 8.10 but I could never get it to work no matter what path to driver I tried.

I have a Dianemo NC30 now which is on 10.10 and it compiled without a problem and is working great.

Are you using 8.10? I think you would have more success with 10.04

Barry

9

Installation issues / Re: Dianemo

« on: March 08, 2011, 10:47:01 pm »

Hi Andrew

I setup and had a play with the xbmc upnp over the weekend and it's working well, is it possible to control xbmc directly (and boxee)?

I still can't get live tv on the orbiters tho, I've been looking at mythbackend.log and there is no mention of mythtv player starting from the orbiters, but if I start mythfrontend from terminal or mythtv player from a windows machine there is. is there a way to check if it is running?

Thanks

Barry

10

Installation issues / Re: Dianemo

« on: March 03, 2011, 08:55:08 pm »

Hi Andrew

I've setup mythtv through terminal as you suggested and mythfrontend is working if I start it from terminal on both the NC and MM's but it doesn't start from the orbiter.

Do I need to install any other packages.

Thanks

Barry

11

Installation issues / Re: Dianemo

« on: March 01, 2011, 07:23:18 pm »

Hi Andrew

I've turned the input back over to HDMI and it seems to be working. If it does it again I'll leave it as is and let you know

I've setup mythtv on the NC in terminal but I dont have any cards in the NC they are in the MM and I dont have mythtv-setup on it, is it possible to manually add it.

Also is http://192.168.80.1/dianemo-admin/upnpfind.php the correct address for setting up XBMC upnp because it tells me that page doesn't exist.

when I boot up the NC and MM the progress window tells me some devices failed to start up, I dont know if that is relevant to anything but I thought I would mention it just in case.

Thanks

Barry

12

Installation issues / Re: Dianemo

« on: February 28, 2011, 10:04:16 pm »

Hi Andrew

Nothing has been changed in the setup. I had the tv turned onto the NC yesterday and all was ok. I added an Asrock ion 330 as a MM, setup motion and a usb webcam from pluto-admin as of the wiki and then deleted motion and the webcam because it didnt work and im planning on getting some ip cameras.

I have a clonezilla image from when I first got the NC as a backup, should I install that to see if it fixes the problem?

Thanks

Barry

13

Installation issues / Re: Dianemo

« on: February 28, 2011, 08:31:03 pm »

Hi Andrew

Sorry about this but now there is another problem.

After reading your post when i got in from work I turned my tv over onto the NC input and I'm getting a black screen with mode not supported on it.

I tried a couple of reboots and it loads as far as the dcerouter login screen just after the ubuntu 10.10 screen and then back to mode not supported.

I've plugged in a VGA cable and run AV wizard which gets the screen back on but same problem if I try and choose HDMI.

Any ideas?

Thanks

Barry

14

Installation issues / Re: Dianemo

« on: February 26, 2011, 07:29:30 pm »

Hi Andrew

I'm trying to setup mythtv on the NC and a MM but I'm having problems.

I've added mythtv-setup to the computing screen on both computers but nothing happens when I select it.

Is there something else I should be doing.

Thanks

Barry

15

Installation issues / Re: Dianemo

« on: February 23, 2011, 12:51:37 am »

Hi Andrew

Thanks for getting back to me late on.

I didn't realise there was 2 different web admin pages, everything is up and running.

Thanks again,

Barry