1
Installation issues / Re: Dianemo: Licence doesn't match this machine.
« on: March 09, 2012, 09:56:20 pm »
It's a VM, upgraded from version 4.1 to version 5. Upgraded the VM, that might have done it.
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
LinuxMCE sponsor
open.home.automation
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Installation issues / Dianemo: Licence doesn't match this machine.
« on: March 08, 2012, 10:11:45 pm »
Hello,
Long story short, I had to reinstall Dianemo. I installed my key, and then ran the installer. The install fails. The error says, "The licence doesn't match this machine. Please get in touch to resolve this problem."
How do I go about fixing this? Thanks.
_Nate
Long story short, I had to reinstall Dianemo. I installed my key, and then ran the installer. The install fails. The error says, "The licence doesn't match this machine. Please get in touch to resolve this problem."
How do I go about fixing this? Thanks.
_Nate
3
Users / Re: dianemo video fileing
« on: December 29, 2011, 09:50:01 pm »
Mabey something like specifically named .txt or .lmce file in the directories that you want to do something other then just list the media.
4
Users / Re: dianemo video fileing
« on: December 26, 2011, 02:15:28 am »
Yea... that could work for me, but I plan on having another NAS to my setup before the new year.... and the wife doesnt like new "menu's"... We can make due with this for right now.
5
Users / Re: Dianemo: NAS not being detected?
« on: December 26, 2011, 02:13:08 am »
Thanks again,
Thom, my NAS's IP is 80.31 and works flawlessly with LMCE 1004. Klovell, I looked at the wiki.... and /etc/pluto/media_config.conf does not exists. Still open to all suggestions.
Thom, my NAS's IP is 80.31 and works flawlessly with LMCE 1004. Klovell, I looked at the wiki.... and /etc/pluto/media_config.conf does not exists. Still open to all suggestions.
6
Users / Re: dianemo video fileing
« on: December 23, 2011, 03:07:55 am »
Thanks for the reply. (o:`,
7
Users / Dianemo: NAS not being detected?
« on: December 23, 2011, 01:51:34 am »
Hello,
My NAS share is not being detected.... I ran: /usr/pluto/bin/MessageSend dcerouter 0 -1001 2 65 52 3 53 2 5 "X" 28 "Y" with the proper data... then I ran "/usr/pluto/bin/MessageSend dcerouter 0 -1001 2 65 52 3 53 2 49 1837", then I ran "/usr/pluto/bin/MessageSend dcerouter <device id> -1001 2 65 52 3 53 2 49 1768" The system found my NAS and it found the share, but it didnt really detect anything.... after double checking ... it just now detected the file system and free disk space, but there have been no media files detected. I'm at a loss. Thanks.
_nate
My NAS share is not being detected.... I ran: /usr/pluto/bin/MessageSend dcerouter 0 -1001 2 65 52 3 53 2 5 "X" 28 "Y" with the proper data... then I ran "/usr/pluto/bin/MessageSend dcerouter 0 -1001 2 65 52 3 53 2 49 1837", then I ran "/usr/pluto/bin/MessageSend dcerouter <device id> -1001 2 65 52 3 53 2 49 1768" The system found my NAS and it found the share, but it didnt really detect anything.... after double checking ... it just now detected the file system and free disk space, but there have been no media files detected. I'm at a loss. Thanks.
_nate
8
Users / dianemo video fileing
« on: December 21, 2011, 01:46:05 am »
I am sure this will be really close to linuxmce... but how do I file all of the Animaniacs Episodes under a single file folder in my videos display.... and Season 1 under that and so fourth.... and season 2..... ect... thanks.... v/r
Nate
Nate
9
Users / 2 padorbiter issues
« on: November 27, 2011, 03:34:14 am »
Hello,
The first issue is trying to compile a driver for a wpc600n pcmcia card.... I tried doing it on the webdt366 itself but it seems gcc isnt included on the padorbiter distro... I also tried to do it inside an esxi 4.1 vm but I couldnt even get that to boot to a terminal. If anyone out there could walk me thru the process of getting the RA2860 drivers compiled on the webdt 366.
My other issue is what is the process of getting the new 1004 splash screen on the webdt..... I like it better then the older one.... thanks in advanced.... ttyl.
The first issue is trying to compile a driver for a wpc600n pcmcia card.... I tried doing it on the webdt366 itself but it seems gcc isnt included on the padorbiter distro... I also tried to do it inside an esxi 4.1 vm but I couldnt even get that to boot to a terminal. If anyone out there could walk me thru the process of getting the RA2860 drivers compiled on the webdt 366.
My other issue is what is the process of getting the new 1004 splash screen on the webdt..... I like it better then the older one.... thanks in advanced.... ttyl.
10
Users / Re: Issue running LinuxMCE on ESXi
« on: July 23, 2011, 10:03:45 pm »
I have a question klovell..... when you are setting up just the core.... do you just stop the wizard after you setup the house?
11
Users / Issue running LinuxMCE on ESXi
« on: July 23, 2011, 05:50:46 pm »
Hello all,
For a while now I've been running LinuxMCE on ESXi, and it runs great. Except for one thing, when ever I am in the LinuxMCE VM on the vSphere client, single mouse clicks are interpreted as double mouse clicks. Is anyone else out there running into the same issue? Also, when should I install the VMware Tools on the VM, before the apt-get updates, after the updates or after linuxmce installer script? Or does it even matter?
Thanks.
For a while now I've been running LinuxMCE on ESXi, and it runs great. Except for one thing, when ever I am in the LinuxMCE VM on the vSphere client, single mouse clicks are interpreted as double mouse clicks. Is anyone else out there running into the same issue? Also, when should I install the VMware Tools on the VM, before the apt-get updates, after the updates or after linuxmce installer script? Or does it even matter?
Thanks.
12
Users / Sangoma USB FXO U100 - 2 Port
« on: July 12, 2011, 09:19:29 pm »
Just putting a query out there...... is anyone using one of these ? Thanks....
13
Installation issues / Re: 8.10 Installation - Never successful
« on: January 23, 2011, 06:18:20 pm »
Yea, listen to DragonK.... the DVD is more or less broken.... my last install I used snapshot 23642, and it worked great, you will have to modify your /etc/apt/sources.list in order for it to update though. When I installed it I used the kubuntu install, then after updating I downloaded the installer.
http://forum.linuxmce.org/index.php?topic=10901.0
http://wiki.linuxmce.org/index.php/Installing_0810
http://forum.linuxmce.org/index.php?topic=10901.0
http://wiki.linuxmce.org/index.php/Installing_0810
14
Developers / Re: Asterisk is not work with LinuxMCE1004
« on: January 23, 2011, 06:06:38 pm »
I dont know if this will help you.... but as I was going thru the logs (0810) it said that there where a bunch of config files missing, and that currently asterisk will run, but in the future the files need to exist even if they are blank, if they arnt there, asterisk will fail to start.
15
Users / All Zap channels report congestion
« on: January 23, 2011, 05:39:19 pm »
Okay,
As the subject says all the zap channels on my tdm400 card give me a congestion error. I have 2 FXO modules and 2 FXS modules, heres what the Phone Lines -> AMP config looks like:
(if I didnt include a field, that means I left it blank or default)
(extension 201 is a working ip phone)
Trunks
Trunk 3
Zap Identifier (trunk name): 3
Trunk 4
Zap Identifier (trunk name): 4
Outbound Routes
Route Name: 8_outside
Dial Patterns: 8|.
Trunk Sequence: 0 ZAP/3
Route Name: 9_outside
Dial Patterns: 9|.
Trunk Sequence: 0 ZAP/4
Inbound Routes
Description: lingo
Zaptel Channel: 3
Extensions: <201> pl_35
Description: german
Zaptel Channel: 4
Extensions: <201> pl_35
I cant call out or receive calls. I've been banging my head into this brick wall for about 2 weeks now. I dont know what I am doing wrong.... ANY help would be greatly appreciated. Also, my IP phone can call my MD's and visa-versa.
_nate (o:`,
As the subject says all the zap channels on my tdm400 card give me a congestion error. I have 2 FXO modules and 2 FXS modules, heres what the Phone Lines -> AMP config looks like:
(if I didnt include a field, that means I left it blank or default)
(extension 201 is a working ip phone)
Trunks
Trunk 3
Zap Identifier (trunk name): 3
Trunk 4
Zap Identifier (trunk name): 4
Outbound Routes
Route Name: 8_outside
Dial Patterns: 8|.
Trunk Sequence: 0 ZAP/3
Route Name: 9_outside
Dial Patterns: 9|.
Trunk Sequence: 0 ZAP/4
Inbound Routes
Description: lingo
Zaptel Channel: 3
Extensions: <201> pl_35
Description: german
Zaptel Channel: 4
Extensions: <201> pl_35
I cant call out or receive calls. I've been banging my head into this brick wall for about 2 weeks now. I dont know what I am doing wrong.... ANY help would be greatly appreciated. Also, my IP phone can call my MD's and visa-versa.
_nate (o:`,