News:

Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - pyrilampes

#1
Hauppauge 1850 pci-e
ward@Starship2:~$ sudo lspci -vn
[sudo] password for ward:      
00:00.0 0580: 10de:005e (rev a3)
       Flags: bus master, 66MHz, fast devsel, latency 0
       Capabilities: [44] HyperTransport: Slave or Primary Interface
       Capabilities: [e0] HyperTransport: MSI Mapping Enable+ Fixed-

00:01.0 0601: 10de:0050 (rev a3)
       Subsystem: 10de:cb84    
       Flags: bus master, 66MHz, fast devsel, latency 0

00:01.1 0c05: 10de:0052 (rev a2)
       Subsystem: 10de:cb84    
       Flags: 66MHz, fast devsel, IRQ 10
       I/O ports at fc00 [size=32]      
       I/O ports at f800 [size=64]      
       I/O ports at f400 [size=64]      
       Capabilities: [44] Power Management version 2
       Kernel driver in use: nForce2_smbus          
       Kernel modules: i2c-nforce2                  

00:02.0 0c03: 10de:005a (rev a2) (prog-if 10)
       Subsystem: 10de:cb84                
       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
       Memory at febff000 (32-bit, non-prefetchable) [size=4K]
       Capabilities: [44] Power Management version 2          
       Kernel driver in use: ohci_hcd                          
       Kernel modules: ohci-hcd                                

00:02.1 0c03: 10de:005b (rev a3) (prog-if 20)
       Subsystem: 10de:cb84                
       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
       Memory at febfe000 (32-bit, non-prefetchable) [size=256]
       Capabilities: [44] Debug port: BAR=1 offset=0098        
       Capabilities: [80] Power Management version 2          
       Kernel driver in use: ehci_hcd                          
       Kernel modules: ehci-hcd                                

00:04.0 0401: 10de:0059 (rev a2)
       Subsystem: 16f3:6405    
       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22
       I/O ports at f000 [size=256]                            
       I/O ports at ec00 [size=256]                            
       Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
       Capabilities: [44] Power Management version 2          
       Kernel driver in use: Intel ICH                        
       Kernel modules: snd-intel8x0                            

00:06.0 0101: 10de:0053 (rev a2) (prog-if 8a [Master SecP PriP])
       Subsystem: f0de:cb84                                    
       Flags: bus master, 66MHz, fast devsel, latency 0        
       [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]                                                                            
       [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]                                                                            
       [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]                                                                            
       [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]                                                                            
       I/O ports at e000 [size=16]                                            
       Capabilities: [44] Power Management version 2                          
       Kernel driver in use: pata_amd                                          
       Kernel modules: pata_amd                                                

00:07.0 0101: 10de:0054 (rev a3) (prog-if 85 [Master SecO PriO])
       Subsystem: 10de:cb84                                    
       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
       I/O ports at 09f0 [size=8]                              
       I/O ports at 0bf0 [size=4]                              
       I/O ports at 0970 [size=8]                              
       I/O ports at 0b70 [size=4]                              
       I/O ports at cc00 [size=16]                            
       Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
       Capabilities: [44] Power Management version 2          
       Kernel driver in use: sata_nv                          
       Kernel modules: sata_nv                                

00:08.0 0101: 10de:0055 (rev a3) (prog-if 85 [Master SecO PriO])
       Subsystem: 10de:cb84                                    
       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23
       I/O ports at 09e0 [size=8]                              
       I/O ports at 0be0 [size=4]                              
       I/O ports at 0960 [size=8]                              
       I/O ports at 0b60 [size=4]                              
       I/O ports at b800 [size=16]                            
       Memory at febfa000 (32-bit, non-prefetchable) [size=4K]
       Capabilities: [44] Power Management version 2          
       Kernel driver in use: sata_nv                          
       Kernel modules: sata_nv                                

00:09.0 0604: 10de:005c (rev a2) (prog-if 01)
       Flags: bus master, 66MHz, fast devsel, latency 0
       Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
       I/O behind bridge: 0000a000-0000afff                        
       Memory behind bridge: fe900000-fe9fffff                      
       Prefetchable memory behind bridge: fea00000-feafffff        

00:0a.0 0680: 10de:0057 (rev a3)
       Subsystem: 10de:cb84    
       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21
       Memory at febf9000 (32-bit, non-prefetchable) [size=4K]
       I/O ports at b400 [size=8]                              
       Capabilities: [44] Power Management version 2          
       Kernel driver in use: forcedeth                        
       Kernel modules: forcedeth                              

00:0b.0 0604: 10de:005d (rev a3)
       Flags: bus master, fast devsel, latency 0
       Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
       I/O behind bridge: 00009000-00009fff                        
       Memory behind bridge: fe800000-fe8fffff                    
       Prefetchable memory behind bridge: 00000000fe700000-00000000fe7fffff
       Capabilities: [40] Power Management version 2                      
       Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+                                                                        
       Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-          
       Capabilities: [80] Express Root Port (Slot+), MSI 00                    
       Capabilities: [100] Virtual Channel <?>                                
       Kernel driver in use: pcieport-driver                                  
       Kernel modules: shpchp                                                  

00:0c.0 0604: 10de:005d (rev a3)
       Flags: bus master, fast devsel, latency 0
       Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
       I/O behind bridge: 00008000-00008fff                        
       Memory behind bridge: fe600000-fe6fffff                    
       Prefetchable memory behind bridge: 00000000fe500000-00000000fe5fffff
       Capabilities: [40] Power Management version 2                      
       Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+                                                                        
       Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-          
       Capabilities: [80] Express Root Port (Slot+), MSI 00                    
       Capabilities: [100] Virtual Channel <?>                                
       Kernel driver in use: pcieport-driver                                  
       Kernel modules: shpchp                                                  

00:0d.0 0604: 10de:005d (rev a3)
       Flags: bus master, fast devsel, latency 0
       Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
       I/O behind bridge: 00007000-00007fff                        
       Memory behind bridge: fe200000-fe3fffff                    
       Prefetchable memory behind bridge: 00000000fe400000-00000000fe4fffff
       Capabilities: [40] Power Management version 2                      
       Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+                                                                        
       Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-          
       Capabilities: [80] Express Root Port (Slot+), MSI 00                    
       Capabilities: [100] Virtual Channel <?>                                
       Kernel driver in use: pcieport-driver                                  
       Kernel modules: shpchp                                                  

00:0e.0 0604: 10de:005d (rev a3)
       Flags: bus master, fast devsel, latency 0
       Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
       I/O behind bridge: 00006000-00006fff                        
       Memory behind bridge: fa000000-fdffffff                    
       Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
       Capabilities: [40] Power Management version 2                      
       Capabilities: [48] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+                                                                        
       Capabilities: [58] HyperTransport: MSI Mapping Enable+ Fixed-          
       Capabilities: [80] Express Root Port (Slot+), MSI 00                    
       Capabilities: [100] Virtual Channel <?>                                
       Kernel driver in use: pcieport-driver                                  
       Kernel modules: shpchp                                                  

00:18.0 0600: 1022:1100
       Flags: fast devsel
       Capabilities: [80] HyperTransport: Host or Secondary Interface

00:18.1 0600: 1022:1101
       Flags: fast devsel

00:18.2 0600: 1022:1102
       Flags: fast devsel

00:18.3 0600: 1022:1103
       Flags: fast devsel
       Kernel driver in use: k8temp
       Kernel modules: k8temp

04:00.0 0400: 14f1:8880 (rev 04)
       Subsystem: 0070:8541
       Flags: bus master, fast devsel, latency 0, IRQ 19
       Memory at fe200000 (64-bit, non-prefetchable) [size=2M]
       Capabilities: [40] Express Endpoint, MSI 00
       Capabilities: [80] Power Management version 3
       Capabilities: [90] Vital Product Data <?>
       Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0Enable-
       Capabilities: [100] Advanced Error Reporting <?>
       Capabilities: [200] Virtual Channel <?>
       Kernel driver in use: cx23885
       Kernel modules: cx23885

05:00.0 0300: 10de:06e4 (rev a1)
       Flags: bus master, fast devsel, latency 0, IRQ 18
       Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
       Memory at d0000000 (64-bit, prefetchable) [size=256M]
       Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
       I/O ports at 6c00 [size=128]
       [virtual] Expansion ROM at fd000000 [disabled] [size=128K]
       Capabilities: [60] Power Management version 3
       Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0Enable-
       Capabilities: [78] Express Endpoint, MSI 00
       Capabilities: [100] Virtual Channel <?>
       Capabilities: [128] Power Budgeting <?>
       Capabilities: [600] Vendor Specific Information <?>
       Kernel modules: nvidia, nvidiafb[/size][/size]

ward@Starship2:~$

MSI 785GT 1gb ram(test-pc) nvidia gforce 8400
And v4l2-ctl -n - no response. (installing v4l drivers and reboot stops at modprobe.
#2
Do you have an 810 core system available?
#3
810 linuxmce  HVR-1850 causes Kubuntu to crash during boot after apt-get install v4l2-modules and v4l2-firmware have been installed.

This time it gets to "Loading Manual Drivers" and stops.

What log file should I look too and is there an easy fix to get around this?

MSI 785-gt motherboard  athlon x4 processor 4gig ram haupage dvb-t HVR-1850 card with onboard nvidia .
#4
That's good to know..  so what is the pre install dvd.sh for? Why does it inport when you get latest? And do you have an accurate install wiki for using a snapshot?  Did you know your only dvd seller sells version 1 of linuxmce? Or that your current bbeta 810 dvd doesn't load the sources correctly so the installation fails. Throw me a bone here.. I bought a crapload of equipment and can't get it running on 810. Is the consensus that you can only use the cd installer?
#5
The newest snapshot gets past this when
sudo su - #This might ask for the password you specified earlier during the install of kubuntu.
apt-get update
sudo apt-get dist-upgrade
wget -c http://deb.linuxmce.org/ubuntu/new-installer-latest.tar.gz
tar xvf new-installer-latest.tar.gz
cd new-installer
./pre-install-from-DVD.sh

Of course now I get "orbiter failed to setup the transparency"
I will be trading out video cards to see if I can get past this, apparently I read it was an invidia driver load problem. unless anyone has suggestions
#6
Is there any change to include all the resources on a single blue ray disk or on a dual layer dvd for an off network installation? Or is it possible to create your own?
#7
You might want to restart your download. I noticed they have a new iso out on the snapshots just this afternoon that looks 100mb larger. I am trying to download it now.