Okay thanks for the info:)
I was just not sure if the atom was strong enough or it should be an core 2 duo.
Thanks Tim
I was just not sure if the atom was strong enough or it should be an core 2 duo.
Thanks Tim
- Welcome to LinuxMCE Forums.
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
#1
Users / Re: Good idea fore a New Core/Hybrid power usage around 30-60 watt ?
April 05, 2011, 02:54:26 PM #2
Users / Re: Good idea fore a New Core/Hybrid power usage around 30-60 watt ?
April 04, 2011, 09:47:56 PM
okay, i have seen that but not found any directly core/hybrid example.
could i use an
ASUS EEEBOX 1501U 1.6 2GB/250GB Intel Atom N330 1,6 GHz 1 MB,
when it is only an atom CPU ?
could i use an
ASUS EEEBOX 1501U 1.6 2GB/250GB Intel Atom N330 1,6 GHz 1 MB,
when it is only an atom CPU ?
#3
Users / Good idea fore a New Core/Hybrid power usage around 30-60 watt ?
April 04, 2011, 08:18:01 PM
Hi im looking for a smaller Core/Hybrid with power usage 30-60 watt.
It's only for one tv maybe in the future one MD.
My setup right now:
core/hybrid:
pentium 4
3gb ram
Nvidia 9600 gt
Usb-serial connected to receiver.
Sound using spdif to receiver
HDMI to receiver
I'm using Mythtv connecting to a Hd-Homerun.
4TB NAS.
New Setup thoughts is:
Small pc like an eee-pc, zotac or mac mini or something like that.
Usb-serial connected to receiver.
HDMI to receiver with both sound and video
Mythtv connecting to a Hd-Homerun.
4TB NAS.
Maybe an blu ray drive.
Fore my setup is it not necessary fore 2 NIC's
Hope some of you have a good idea for such core/hybrid
It's only for one tv maybe in the future one MD.
My setup right now:
core/hybrid:
pentium 4
3gb ram
Nvidia 9600 gt
Usb-serial connected to receiver.
Sound using spdif to receiver
HDMI to receiver
I'm using Mythtv connecting to a Hd-Homerun.
4TB NAS.
New Setup thoughts is:
Small pc like an eee-pc, zotac or mac mini or something like that.
Usb-serial connected to receiver.
HDMI to receiver with both sound and video
Mythtv connecting to a Hd-Homerun.
4TB NAS.
Maybe an blu ray drive.
Fore my setup is it not necessary fore 2 NIC's
Hope some of you have a good idea for such core/hybrid
#4
Users / Re: [SOLVED]VDR on MD Channel not available
August 06, 2010, 09:00:34 AM
Hi Again, I found out it was VDR there was adding new channels to channels.conf.save.
Thanks for the help:)
Thanks for the help:)
#5
Users / Re: VDR on MD Channel not available
August 02, 2010, 08:34:54 PM
Hey again, now have done a reinstall of the core.
I change this:
Core Setup.conf
and:
streamdevhosts.conf
On MD i change:
Core and MD I have createt the same Channels.conf.
Is there more i should change ?
This is what i get in syslog
Thanks.
I change this:
Core Setup.conf
Quotestreamdev-server.AllowSuspend = 1
streamdev-server.MaxClients = 6
streamdev-server.StartHTTPServer = 1
streamdev-server.StartVTPServer = 1
streamdev-server.SuspendMode = 1
and:
streamdevhosts.conf
Quote
127.0.0.1 # always accept localhost
#192.168.80.0/24 # any host on the local net
#204.152.189.113 # a specific host
#239.255.0.0/16 # uncomment for IGMP multicast streaming
0.0.0.0/0 # any host on any net (USE THIS WITH CARE!)
On MD i change:
Quotestreamdev-client.RemoteIp = 192.168.80.1
streamdev-client.RemotePort = 2004
streamdev-client.StartClient = 1
streamdev-client.StreamFilters = 1
streamdev-client.SyncEPG = 0
Core and MD I have createt the same Channels.conf.
Is there more i should change ?
This is what i get in syslog
QuoteAug 2 20:32:00 moon34 vdr: [20807] switching to channel 1
Aug 2 20:32:00 moon34 vdr: [20807] ERROR: Streamdev: Couldn't check if 192.168.80.1:2004 provides ch$
Aug 2 20:32:00 moon34 vdr: [20807] info: Channel not available!
Aug 2 20:32:02 moon34 vdr-sxfe[20886]: [20926] [input_vdr] No data in 8 seconds, queuing no signal i$
Aug 2 20:32:02 moon34 vdr: [20807] max. latency time 3 seconds
Aug 2 20:32:10 moon34 vdr-sxfe[20886]: [20926] [input_vdr] No data in 8 seconds, queuing no signal i$
Thanks.
#6
Users / Re: VDR on MD Channel not available
August 02, 2010, 02:12:44 PM
Hi again.
No it is only the last bit of getting vdr working on the MD.
But i just fund out that my channels.conf.save were deffrent from the channels.conf.
I just tried to change it, but I still have more programs in vdr than in, any of my channels.conf.
Do you know if thats becaurs of the transponder more channels on the same transponder?
But rigtig now I have another problem:
eypone@dcerouter:~$ sudo -s
sudo: /etc/sudoers is mode 0660, should be 0440
And My MD wont boot.
The only thing i have don is to add a rs232 for my Av !
Ill need to have a look on this before I can go any further.
No it is only the last bit of getting vdr working on the MD.
But i just fund out that my channels.conf.save were deffrent from the channels.conf.
I just tried to change it, but I still have more programs in vdr than in, any of my channels.conf.
Do you know if thats becaurs of the transponder more channels on the same transponder?
But rigtig now I have another problem:
eypone@dcerouter:~$ sudo -s
sudo: /etc/sudoers is mode 0660, should be 0440
And My MD wont boot.
The only thing i have don is to add a rs232 for my Av !
Ill need to have a look on this before I can go any further.
#7
Users / Re: VDR on MD Channel not available
August 02, 2010, 11:27:15 AM
Hi again sorry for jumping over your question.
I follow this guide
http://wiki.linuxmce.org/index.php/VDR_Manual_Install
What changes did you do to the setup.conf on core and MD?
Core setup.conf i change
An when it did not work I tried
MD setup.conf i change
Core svdrphosts.conf I change the IP addressee to allow the access from my net.
Do you record/watch anything on the core during the problem?
No, I didn't not record anything.
I tried to watch the same channel as the MD tried to stream/tune.
But I have also tried with vdr off on the core.
Hope that can help.
Thanks alot for the help
I follow this guide
http://wiki.linuxmce.org/index.php/VDR_Manual_Install
What changes did you do to the setup.conf on core and MD?
Core setup.conf i change
Quotestreamdev-server.AllowSuspend = 1
streamdev-server.MaxClients = 6
streamdev-server.StartHTTPServer = 1
streamdev-server.StartVTPServer = 1 (This one I didn't find so I have not past it in to setup.conf)
streamdev-server.SuspendMode = 1
An when it did not work I tried
Quotestreamdev-server.HTTPBindIP = 192.168.80.1 instead of the 0.0.0.0
svdrpservice.ServerIp = 192.168.80.1 instead of the 0.0.0.0
MD setup.conf i change
Quotestreamdev-client.RemoteIp = 192.168.80.1
streamdev-client.RemotePort = 2004
streamdev-client.StartClient = 1
streamdev-client.StreamFilters = 0
streamdev-client.SyncEPG = 1
Core svdrphosts.conf I change the IP addressee to allow the access from my net.
Quote127.0.0.1 # always accept localhost
192.168.80.0/24 # any host on the local net
#204.152.189.113 # a specific host
0.0.0.0/0 # any host on any net (USE THIS WITH CARE!)
Do you record/watch anything on the core during the problem?
No, I didn't not record anything.
I tried to watch the same channel as the MD tried to stream/tune.
But I have also tried with vdr off on the core.
Hope that can help.
Thanks alot for the help
#8
Users / Re: VDR on MD Channel not available
August 02, 2010, 08:47:16 AM
The channels.conf is the same, I just had a look.
I have 3 dvb-c tuners in my core.
1 x SATELCO
2 x Cinergy PCI HD.
The Cinergy tuner I need to load the driver for modprobe mantis, and reload vdr.
I dont now if this have something to do with it, but i did't this command in the end of the installation.
sudo echo "blacklist pcspkr" >> /etc/modprobe.d/blacklist
Is there any log I should look at ?
Thanks
I have 3 dvb-c tuners in my core.
1 x SATELCO
2 x Cinergy PCI HD.
The Cinergy tuner I need to load the driver for modprobe mantis, and reload vdr.
I dont now if this have something to do with it, but i did't this command in the end of the installation.
sudo echo "blacklist pcspkr" >> /etc/modprobe.d/blacklist
Is there any log I should look at ?
Thanks
#9
Users / [SOLVED]VDR on MD Channel not available
August 01, 2010, 09:41:35 PM
Hi I need some help to to find out why I get this message on the MD, Channel not available.
I have setup the Channels.conf on the MD, the same way i have on my core/hybrid.
The VDR is working fine on the core/hybrid.
This is some of the setup.conf on the core
This is the setup.conf
and this is the channels.conf it is the same on the core as on the MD.
Hope some one can help me out.
Thanks
I have setup the Channels.conf on the MD, the same way i have on my core/hybrid.
The VDR is working fine on the core/hybrid.
This is some of the setup.conf on the core
Quotestreamdev-server.AllowSuspend = 1
streamdev-server.HTTPBindIP = 192.168.80.1
streamdev-server.HTTPServerPort = 3000
streamdev-server.HTTPStreamType = 2
streamdev-server.IGMPBindIP = 0.0.0.0
streamdev-server.IGMPClientPort = 1234
streamdev-server.IGMPStreamType = 0
streamdev-server.MaxClients = 6
streamdev-server.ServerPort = 2004
streamdev-server.StartHTTPServer = 1
streamdev-server.StartIGMPServer = 0
streamdev-server.StartServer = 1
streamdev-server.SuspendMode = 0
svdrpservice.ConnectTimeout = 2
svdrpservice.ReadTimeout = 5
svdrpservice.ServerIp = 192.168.80.1
svdrpservice.ServerPort = 2001
This is the setup.conf
Quotestreamdev-client.HideMenuEntry = 0
streamdev-client.MaxPriority = 99
streamdev-client.MinPriority = -1
streamdev-client.RemoteIp = 192.168.80.1
streamdev-client.RemotePort = 2004
streamdev-client.StartClient = 1
streamdev-client.StreamFilters = 1
streamdev-client.SyncEPG = 1
svdrpservice.ConnectTimeout = 2
svdrpservice.ReadTimeout = 5
svdrpservice.ServerIp = 192.168.80.1
svdrpservice.ServerPort = 2001
and this is the channels.conf it is the same on the core as on the MD.
QuoteDR 1:346:M64:C:6900:2310:2311:2319:0:231:0:0:0
TV 2:346:M64:C:6900:2370:2371:2379:0:237:0:0:0
TV3:322:M256:C:6900:1720:1721:1729:0:1172:0:0:0
3+:514:M256:C:6900:1700:1701:1709:0:1170:0:0:0
TV 2 Zulu:514:M256:C:6900:1220:1221:1229:0:1122:0:0:0
DR 2:346:M64:C:6900:2320:2321:2329:0:232:0:0:0
DR Update:266:M256:C:6900:2510:2511:2519:0:1251:0:0:0
DR K:274:M256:C:6900:980:981:989:0:1098:0:0:0
DR Ramasjang:274:M256:C:6900:990:991:999:0:1099:0:0:0
DR HD:274:M256:C:6900:0:1651;1652:1659:0:1165:0:0:0
aalborg+:314:M256:C:6900:1010:1011:0:0:1101:0:0:0
24Nordjyske:314:M256:C:6900:1200:1201:1209:0:1120:0:0:0
NRK1:314:M256:C:6900:1340:1341:1349:0:1134:0:0:0
NatGeo HD :322:M256:C:6900:0:1541:0:1:154:0:0:0
VH1 Classic Europe :426:M256:C:6900:1460:1461:0:1:146:0:0:0
ZDF:418:M256:C:6900:1840:1841;1842:1849:0:1184:0:0:0
TV 2 Charlie :418:M256:C:6900:2030:2031:2039:1:203:0:0:0
Hope some one can help me out.
Thanks
#10
Users / Re: PXE boot problem in 8.10
August 01, 2010, 09:21:23 PM
Hi, have you installed fro dvd ?
I think this is the solution.
To setup package to run diskless media directors
/usr/pluto/bin/Diskless_CreateTBZ.sh
I think this is the solution.
To setup package to run diskless media directors
/usr/pluto/bin/Diskless_CreateTBZ.sh
#11
Users / Re: Media Scenarios, problems with rs232 commands to receiver
April 20, 2010, 11:34:37 AM
sorry for being a noob.
The * after power on * after changing inputs , where shuld I edit them ?
In this file 20_MarantzReceiver.sh or in Edit ruby codes.
The * after power on * after changing inputs , where shuld I edit them ?
In this file 20_MarantzReceiver.sh or in Edit ruby codes.
#12
Users / How to change what keys does on remote ? VDR EPG issue.
April 18, 2010, 09:52:05 PM
Hi, my issue is in VDR the red,green,yellow,blue and back buttons is not working in the EPG.
Insted the yellow is light and volume and i what it to reakt ind VDR instad of the linuxmce.
Insted the yellow is light and volume and i what it to reakt ind VDR instad of the linuxmce.
#13
Users / Media Scenarios, problems with rs232 commands to receiver
April 18, 2010, 08:05:35 PM
Hey I having some issues with rs232 commands and Media Scenarios.
Audio Media Scenario:
What im trying to achiv, power on my receiver, setup receiver to stereo, sho file list.
What happens:
Power on my receiver and MH Play Media, but now Stereo
Tv Media Scenario:
What im trying to achiv, power on my receiver, setup receiver to Neural THX, MH Play Media.
What happens:
Power on my receiver and MH Play Media, but now Neural THX
All my rs232 commands ar working, i have tried to send them to the receiver thrug the linuxmce admin page.
What i think happens is the receiver is getting the Stereo or Neural THX command to fast after power comman to the resiver.
Is ther away to insert a break like 2 second befor sending the Stereo or Neural THX command ?
exsample: Power on receiver, whait to seconds, Stereo , Show file list.
Audio Media Scenario:
What im trying to achiv, power on my receiver, setup receiver to stereo, sho file list.
What happens:
Power on my receiver and MH Play Media, but now Stereo
Tv Media Scenario:
What im trying to achiv, power on my receiver, setup receiver to Neural THX, MH Play Media.
What happens:
Power on my receiver and MH Play Media, but now Neural THX
All my rs232 commands ar working, i have tried to send them to the receiver thrug the linuxmce admin page.
What i think happens is the receiver is getting the Stereo or Neural THX command to fast after power comman to the resiver.
Is ther away to insert a break like 2 second befor sending the Stereo or Neural THX command ?
exsample: Power on receiver, whait to seconds, Stereo , Show file list.
#14
Users / Re: How to view Version of linuxmce! And upgrade it to the newest
April 08, 2010, 02:47:11 PM
Hey is this not only for the dist-upgrade ?
im only looking for update the linuxmce to the latest
As you can se it fails to download some of the Packages.
Is ther any one who can tell me how to do an upgrade ? or shuld i reinstall with this link and the latest ISO http://linuxmce.iptp.org/snapshots/ ?
im only looking for update the linuxmce to the latest
Quoteroot@dcerouter:~# apt-get update
Ign file: ./ Release.gpg
Ign file: ./ Translation-en_US
Ign file: ./ Release
Ign file: ./ Packages
Hit http://security.ubuntu.com intrepid-security Release.gpg
Ign http://security.ubuntu.com intrepid-security/main Translation-en_US
Hit http://archive.ubuntu.com intrepid Release.gpg
Ign http://archive.ubuntu.com intrepid/main Translation-en_US
Hit http://packages.medibuntu.org intrepid Release.gpg
Ign http://packages.medibuntu.org intrepid/free Translation-en_US
Hit http://us.archive.ubuntu.com intrepid Release.gpg
Ign http://us.archive.ubuntu.com intrepid/main Translation-en_US
Ign http://security.ubuntu.com intrepid-security/restricted Translation-en_US
Ign http://security.ubuntu.com intrepid-security/universe Translation-en_US
Ign http://security.ubuntu.com intrepid-security/multiverse Translation-en_US
Hit http://security.ubuntu.com intrepid-security Release
Ign http://deb.linuxmce.org intrepid Release.gpg
Ign http://deb.linuxmce.org intrepid/beta2 Translation-en_US
Ign http://archive.ubuntu.com intrepid/universe Translation-en_US
Ign http://archive.ubuntu.com intrepid/multiverse Translation-en_US
Ign http://archive.ubuntu.com universe Release.gpg
Ign http://archive.ubuntu.com universe/main Translation-en_US
Ign http://archive.ubuntu.com universe/non-free Translation-en_US
Ign http://archive.ubuntu.com universe/contrib Translation-en_US
Hit http://archive.ubuntu.com intrepid Release
Ign http://us.archive.ubuntu.com intrepid/restricted Translation-en_US
Ign http://us.archive.ubuntu.com intrepid/universe Translation-en_US
Ign http://us.archive.ubuntu.com intrepid/multiverse Translation-en_US
Hit http://us.archive.ubuntu.com intrepid-updates Release.gpg
Ign http://us.archive.ubuntu.com intrepid-updates/main Translation-en_US
Ign http://us.archive.ubuntu.com intrepid-updates/restricted Translation-en_US
Ign http://us.archive.ubuntu.com intrepid-updates/universe Translation-en_US
Ign http://us.archive.ubuntu.com intrepid-updates/multiverse Translation-en_US
Ign http://packages.medibuntu.org intrepid/non-free Translation-en_US
Hit http://packages.medibuntu.org intrepid Release
Hit http://www.avenard.org intrepid Release.gpg
Ign http://www.avenard.org intrepid/release Translation-en_US
Ign http://archive.ubuntu.com universe Release
Ign http://deb.linuxmce.org 20dev_ubuntu Release.gpg
Ign http://deb.linuxmce.org 20dev_ubuntu/main Translation-en_US
Ign http://deb.linuxmce.org replacements_debian Release.gpg
Ign http://deb.linuxmce.org replacements_debian/main Translation-en_US
Ign http://deb.linuxmce.org intrepid Release
Hit http://us.archive.ubuntu.com intrepid Release
Ign http://archive.ubuntu.com universe/main Packages
Hit http://us.archive.ubuntu.com intrepid-updates Release
Hit http://www.avenard.org intrepid Release
Ign http://deb.linuxmce.org 20dev_ubuntu Release
Ign http://deb.linuxmce.org replacements_debian Release
Hit http://security.ubuntu.com intrepid-security/main Packages
Ign http://archive.ubuntu.com universe/non-free Packages
Ign http://archive.ubuntu.com universe/contrib Packages
Ign http://deb.linuxmce.org intrepid/beta2 Packages
Hit http://packages.medibuntu.org intrepid/free Packages
Hit http://security.ubuntu.com intrepid-security/restricted Packages
Hit http://security.ubuntu.com intrepid-security/universe Packages
Hit http://security.ubuntu.com intrepid-security/multiverse Packages
Hit http://security.ubuntu.com intrepid-security/main Sources
Err http://archive.ubuntu.com universe/main Packages
404 Not Found [IP: 91.189.88.40 80]
Hit http://archive.ubuntu.com intrepid/main Packages
Hit http://archive.ubuntu.com intrepid/universe Packages
Hit http://archive.ubuntu.com intrepid/multiverse Packages
Hit http://us.archive.ubuntu.com intrepid/main Packages
Err http://archive.ubuntu.com universe/non-free Packages
404 Not Found [IP: 91.189.88.40 80]
Ign http://deb.linuxmce.org 20dev_ubuntu/main Packages
Ign http://debian.slimdevices.com stable Release.gpg
Ign http://debian.slimdevices.com stable/main Translation-en_US
Hit http://security.ubuntu.com intrepid-security/restricted Sources
Hit http://security.ubuntu.com intrepid-security/universe Sources
Hit http://security.ubuntu.com intrepid-security/multiverse Sources
Hit http://packages.medibuntu.org intrepid/non-free Packages
Err http://archive.ubuntu.com universe/contrib Packages
404 Not Found [IP: 91.189.88.40 80]
Hit http://us.archive.ubuntu.com intrepid/restricted Packages
Hit http://us.archive.ubuntu.com intrepid/universe Packages
Hit http://us.archive.ubuntu.com intrepid/multiverse Packages
Hit http://us.archive.ubuntu.com intrepid/main Sources
Hit http://www.avenard.org intrepid/release Packages
Hit http://us.archive.ubuntu.com intrepid/restricted Sources
Ign http://deb.linuxmce.org replacements_debian/main Packages
Hit http://us.archive.ubuntu.com intrepid/universe Sources
Hit http://us.archive.ubuntu.com intrepid/multiverse Sources
Hit http://us.archive.ubuntu.com intrepid-updates/main Packages
Hit http://us.archive.ubuntu.com intrepid-updates/restricted Packages
Hit http://us.archive.ubuntu.com intrepid-updates/universe Packages
Hit http://us.archive.ubuntu.com intrepid-updates/multiverse Packages
Hit http://us.archive.ubuntu.com intrepid-updates/main Sources
Hit http://deb.linuxmce.org intrepid/beta2 Packages
Hit http://us.archive.ubuntu.com intrepid-updates/restricted Sources
Hit http://us.archive.ubuntu.com intrepid-updates/universe Sources
Hit http://us.archive.ubuntu.com intrepid-updates/multiverse Sources
Hit http://deb.linuxmce.org 20dev_ubuntu/main Packages
Hit http://deb.linuxmce.org replacements_debian/main Packages
Get:1 http://debian.slimdevices.com stable Release [1645B]
Ign http://debian.slimdevices.com stable/main Packages
Hit http://debian.slimdevices.com stable/main Packages
Fetched 1B in 11s (0B/s)
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/universe/main/binary-i386/Packages.gz 404 Not Found [IP: 91.189.88.40 80]
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/universe/non-free/binary-i386/Packages.gz 404 Not Found [IP: 91.189.88.40 80]
W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/universe/contrib/binary-i386/Packages.gz 404 Not Found [IP: 91.189.88.40 80]
E: Some index files failed to download, they have been ignored, or old ones used instead.
root@dcerouter:~# apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
root@dcerouter:~#
As you can se it fails to download some of the Packages.
Is ther any one who can tell me how to do an upgrade ? or shuld i reinstall with this link and the latest ISO http://linuxmce.iptp.org/snapshots/ ?
#15
Users / Re: How to view Version of linuxmce! And upgrade it to the newest
April 07, 2010, 08:17:37 PM
Hi, thanks for the replay.
When I do sudo dpkg -l \*pluto\* i get alot of info about the version.
fore exsample pluto-xine-pla 2.0.0.44.10030, but i cant figure out how to see the version on the http://wiki.linuxmce.org if this is the latest version.
Is this site http://deb.linuxmce.org/ubuntu/dists/ the right one to add from to the sources.list.
And how to see which folder to add to get the lates updates ?
When I do sudo dpkg -l \*pluto\* i get alot of info about the version.
fore exsample pluto-xine-pla 2.0.0.44.10030, but i cant figure out how to see the version on the http://wiki.linuxmce.org if this is the latest version.
Is this site http://deb.linuxmce.org/ubuntu/dists/ the right one to add from to the sources.list.
And how to see which folder to add to get the lates updates ?