Messages

Thanks Mandingo for all of your hard work 

I just got PCI-E DVB-S2 Dual Tuner TV card supports dual DVB-S2 TV

http://www.tbsdtv.com/english/product/6980.html

sudo lspci -vn

Code Select Expand



00:00.0 0600: 8086:2990 (rev 02)
        Subsystem: 1028:01da
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: intel-agp

00:01.0 0604: 8086:2991 (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff
        Memory behind bridge: fc000000-feafffff
        Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
        Capabilities: [88] Subsystem: 1028:01da
        Capabilities: [80] Power Management version 3
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [a0] Express Root Port (Slot+), MSI 00
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [140] Root Complex Link <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1a.0 0c03: 8086:2834 (rev 02)
        Subsystem: 1028:01da
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at ff20 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1a.1 0c03: 8086:2835 (rev 02)
        Subsystem: 1028:01da
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at ff00 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20)
        Subsystem: 1028:01da
        Flags: bus master, medium devsel, latency 0, IRQ 22
        Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:1b.0 0403: 8086:284b (rev 02)
        Subsystem: 1028:01da
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [130] Root Complex Link <?>
        Kernel driver in use: HDA Intel
        Kernel modules: snd-hda-intel

00:1c.0 0604: 8086:283f (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: fbe00000-fbffffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [90] Subsystem: 1028:01da
        Capabilities: [a0] Power Management version 2
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1c.4 0604: 8086:2847 (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: fbd00000-fbdfffff
        Capabilities: [40] Express Root Port (Slot+), MSI 00
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [90] Subsystem: 1028:01da
        Capabilities: [a0] Power Management version 2
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [180] Root Complex Link <?>
        Kernel driver in use: pcieport-driver
        Kernel modules: shpchp

00:1d.0 0c03: 8086:2830 (rev 02)
        Subsystem: 1028:01da
        Flags: bus master, medium devsel, latency 0, IRQ 23
        I/O ports at ff80 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.1 0c03: 8086:2831 (rev 02)
        Subsystem: 1028:01da
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at ff60 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.2 0c03: 8086:2832 (rev 02)
        Subsystem: 1028:01da
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at ff40 [size=32]
        Kernel driver in use: uhci_hcd
        Kernel modules: uhci-hcd

00:1d.7 0c03: 8086:2836 (rev 02) (prog-if 20)
        Subsystem: 1028:01da
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci_hcd
        Kernel modules: ehci-hcd

00:1e.0 0604: 8086:244e (rev f2) (prog-if 01)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        Prefetchable memory behind bridge: 00000000d0000000-00000000d3ffffff
        Capabilities: [50] Subsystem: 1028:01da

00:1f.0 0601: 8086:2810 (rev 02)
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: iTCO_wdt

00:1f.2 0101: 8086:2820 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 1028:01da
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
        I/O ports at fe00 [size=8]
        I/O ports at fe10 [size=4]
        I/O ports at fe20 [size=8]
        I/O ports at fe30 [size=4]
        I/O ports at fec0 [size=16]
        I/O ports at ecc0 [size=16]
        Capabilities: [70] Power Management version 3
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix

00:1f.3 0c05: 8086:283e (rev 02)
        Subsystem: 1028:01da
        Flags: medium devsel, IRQ 10
        Memory at febfbb00 (32-bit, non-prefetchable) [size=256]
        I/O ports at ece0 [size=32]
        Kernel modules: i2c-i801

00:1f.5 0101: 8086:2825 (rev 02) (prog-if 85 [Master SecO PriO])
        Subsystem: 1028:01da
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
        I/O ports at fe40 [size=8]
        I/O ports at fe50 [size=4]
        I/O ports at fe60 [size=8]
        I/O ports at fe70 [size=4]
        I/O ports at fed0 [size=16]
        I/O ports at ecd0 [size=16]
        Capabilities: [70] Power Management version 3
        Kernel driver in use: ata_piix
        Kernel modules: ata_piix

01:00.0 0300: 10de:0391 (rev a1)
        Subsystem: 3842:c554
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
        Memory at c0000000 (64-bit, prefetchable) [size=256M]
        Memory at fd000000 (64-bit, non-prefetchable) [size=16M]
        I/O ports at dc80 [size=128]
        [virtual] Expansion ROM at fea00000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [78] Express Endpoint, MSI 00
        Capabilities: [100] Virtual Channel <?>
        Capabilities: [128] Power Budgeting <?>
        Kernel driver in use: nvidia
        Kernel modules: nvidia, nvidiafb

02:00.0 0400: 14f1:8852 (rev 02)
        Subsystem: 6980:8888
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fbe00000 (64-bit, non-prefetchable) [size=2M]
        Capabilities: [40] Express Endpoint, MSI 00
        Capabilities: [80] Power Management version 2
        Capabilities: [90] Vital Product Data <?>
        Capabilities: [a0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [200] Virtual Channel <?>
        Kernel driver in use: cx23885
        Kernel modules: cx23885

03:00.0 0200: 14e4:167a (rev 02)
        Subsystem: 1028:01da
        Flags: bus master, fast devsel, latency 0, IRQ 220
        Memory at fbdf0000 (64-bit, non-prefetchable) [size=64K]
        Expansion ROM at <ignored> [disabled]
        Capabilities: [48] Power Management version 3
        Capabilities: [50] Vital Product Data <?>
        Capabilities: [58] Vendor Specific Information <?>
        Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
        Capabilities: [d0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [13c] Virtual Channel <?>
        Capabilities: [160] Device Serial Number 48-21-30-fe-ff-b9-19-00
        Capabilities: [16c] Power Budgeting <?>
        Kernel driver in use: tg3
        Kernel modules: tg3

04:00.0 0400: 4444:0803 (rev 01)
        Subsystem: 0070:4000
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at d0000000 (32-bit, prefetchable) [size=64M]
        Capabilities: [44] Power Management version 2
        Kernel driver in use: ivtv
        Kernel modules: ivtv





sudo v4l2-ctl -n

Code Select Expand


ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : Tuner 1
        Type    : 0x00000001
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x0000000000001000 ( NTSC )
        Status  : 0

        Input   : 1
        Name    : S-Video 1
        Type    : 0x00000002
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 2
        Name    : Composite 1
        Type    : 0x00000002
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 3
        Name    : S-Video 2
        Type    : 0x00000002
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 4
        Name    : Composite 2
        Type    : 0x00000002
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
        Status  : 0

        Input   : 5
        Name    : Composite 3
        Type    : 0x00000002
        Audioset: 0x00000007
        Tuner   : 0x00000000
        Standard: 0x0000000000FFFFFF ( PAL NTSC SECAM )
        Status  : 0


      
      

I am going to install the new Beta 2.6 (fresh install) release tonight. I just downloaded LinuxMCE-8.10-22812-i386.iso from http://linuxmce.iptp.org/snapshots/

Do I need to get the new installer from http://deb.linuxmce.org/ubuntu/new-installer-latest.tar.gz? or that is only for internet install?

I am going to install from the downloaded DVD ISO image.

should I run the following before I run LinuxMCE icon?

Code Select Expand


sudo su - #This might ask for the password you specified earlier during the install of kubuntu.
apt-get update
sudo apt-get dist-upgrade

any suggestions?

I have WinTV-Nexus-S V2.3 PCI

sudo lspci -vn

Code Select Expand



00:00.0 0600: 8086:2990 (rev 02)
        Subsystem: 1028:01da     
        Flags: bus master, fast devsel, latency 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: intel-agp                         

00:01.0 0604: 8086:2991 (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 0000d000-0000dfff                       
        Memory behind bridge: fc000000-feafffff                     
        Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
        Capabilities: [88] Subsystem: 1028:01da                             
        Capabilities: [80] Power Management version 3                       
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [a0] Express Root Port (Slot+), MSI 00                           
        Capabilities: [100] Virtual Channel <?>                                       
        Capabilities: [140] Root Complex Link <?>                                     
        Kernel driver in use: pcieport-driver                                         
        Kernel modules: shpchp                                                         

00:1a.0 0c03: 8086:2834 (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, medium devsel, latency 0, IRQ 16
        I/O ports at ff20 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1a.1 0c03: 8086:2835 (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at ff00 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20)
        Subsystem: 1028:01da                 
        Flags: bus master, medium devsel, latency 0, IRQ 22
        Memory at febfbc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2         
        Capabilities: [58] Debug port: BAR=1 offset=00a0       
        Kernel driver in use: ehci_hcd                         
        Kernel modules: ehci-hcd                               

00:1b.0 0403: 8086:284b (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2           
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00           
        Capabilities: [100] Virtual Channel <?>                                       
        Capabilities: [130] Root Complex Link <?>                                     
        Kernel driver in use: HDA Intel                                               
        Kernel modules: snd-hda-intel                                                 

00:1c.0 0604: 8086:283f (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: fbf00000-fbffffff                     
        Capabilities: [40] Express Root Port (Slot+), MSI 00       
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [90] Subsystem: 1028:01da                                       
        Capabilities: [a0] Power Management version 2                                 
        Capabilities: [100] Virtual Channel <?>                                       
        Capabilities: [180] Root Complex Link <?>                                     
        Kernel driver in use: pcieport-driver                                         
        Kernel modules: shpchp                                                         

00:1c.4 0604: 8086:2847 (rev 02)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        Memory behind bridge: fbe00000-fbefffff                     
        Capabilities: [40] Express Root Port (Slot+), MSI 00       
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
        Capabilities: [90] Subsystem: 1028:01da                                       
        Capabilities: [a0] Power Management version 2                                 
        Capabilities: [100] Virtual Channel <?>                                       
        Capabilities: [180] Root Complex Link <?>                                     
        Kernel driver in use: pcieport-driver                                         
        Kernel modules: shpchp                                                         

00:1d.0 0c03: 8086:2830 (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, medium devsel, latency 0, IRQ 23
        I/O ports at ff80 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.1 0c03: 8086:2831 (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, medium devsel, latency 0, IRQ 17
        I/O ports at ff60 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.2 0c03: 8086:2832 (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, medium devsel, latency 0, IRQ 18
        I/O ports at ff40 [size=32]                       
        Kernel driver in use: uhci_hcd                     
        Kernel modules: uhci-hcd                           

00:1d.7 0c03: 8086:2836 (rev 02) (prog-if 20)
        Subsystem: 1028:01da                 
        Flags: bus master, medium devsel, latency 0, IRQ 23
        Memory at ff980800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2         
        Capabilities: [58] Debug port: BAR=1 offset=00a0       
        Kernel driver in use: ehci_hcd                         
        Kernel modules: ehci-hcd                               

00:1e.0 0604: 8086:244e (rev f2) (prog-if 01)
        Flags: bus master, fast devsel, latency 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        I/O behind bridge: 0000c000-0000cfff                         
        Memory behind bridge: fbc00000-fbdfffff                     
        Prefetchable memory behind bridge: 0000000088000000-00000000880fffff
        Capabilities: [50] Subsystem: 1028:01da                             

00:1f.0 0601: 8086:2810 (rev 02)
        Flags: bus master, medium devsel, latency 0
        Capabilities: [e0] Vendor Specific Information <?>
        Kernel modules: iTCO_wdt                         

00:1f.2 0101: 8086:2820 (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: 1028:01da                                             
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20       
        I/O ports at fe00 [size=8]                                       
        I/O ports at fe10 [size=4]                                       
        I/O ports at fe20 [size=8]                                       
        I/O ports at fe30 [size=4]                                       
        I/O ports at fec0 [size=16]                                       
        I/O ports at ecc0 [size=16]                                       
        Capabilities: [70] Power Management version 3                     
        Kernel driver in use: ata_piix                                   
        Kernel modules: ata_piix                                         

00:1f.3 0c05: 8086:283e (rev 02)
        Subsystem: 1028:01da   
        Flags: medium devsel, IRQ 10
        Memory at febfbb00 (32-bit, non-prefetchable) [size=256]
        I/O ports at ece0 [size=32]                             
        Kernel modules: i2c-i801                               

00:1f.5 0101: 8086:2825 (rev 02) (prog-if 85 [Master SecO PriO])
        Subsystem: 1028:01da                                   
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
        I/O ports at fe40 [size=8]                               
        I/O ports at fe50 [size=4]                               
        I/O ports at fe60 [size=8]                               
        I/O ports at fe70 [size=4]                               
        I/O ports at fed0 [size=16]                               
        I/O ports at ecd0 [size=16]                               
        Capabilities: [70] Power Management version 3             
        Kernel driver in use: ata_piix                           
        Kernel modules: ata_piix                                 

01:00.0 0300: 10de:0391 (rev a1)
        Subsystem: 3842:c554   
        Flags: bus master, fast devsel, latency 0, IRQ 16
        Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
        Memory at d0000000 (64-bit, prefetchable) [size=256M]   
        Memory at fd000000 (64-bit, non-prefetchable) [size=16M]
        I/O ports at dc80 [size=128]                           
        Expansion ROM at fea00000 [disabled] [size=128K]       
        Capabilities: [60] Power Management version 2           
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
        Capabilities: [78] Express Endpoint, MSI 00                                   
        Capabilities: [100] Virtual Channel <?>                                       
        Capabilities: [128] Power Budgeting <?>                                       
        Kernel driver in use: nvidia                                                   
        Kernel modules: nvidiafb, nvidia                                               

03:00.0 0200: 14e4:167a (rev 02)
        Subsystem: 1028:01da   
        Flags: bus master, fast devsel, latency 0, IRQ 220
        Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
        Expansion ROM at <ignored> [disabled]                   
        Capabilities: [48] Power Management version 3
        Capabilities: [50] Vital Product Data <?>
        Capabilities: [58] Vendor Specific Information <?>
        Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
        Capabilities: [d0] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting <?>
        Capabilities: [13c] Virtual Channel <?>
        Capabilities: [160] Device Serial Number 48-21-30-fe-ff-b9-19-00
        Capabilities: [16c] Power Budgeting <?>
        Kernel driver in use: tg3
        Kernel modules: tg3

04:00.0 0480: 1131:7146 (rev 01)
        Subsystem: 13c2:000e
        Flags: bus master, medium devsel, latency 64, IRQ 16
        Memory at fbcbfe00 (32-bit, non-prefetchable) [size=512]
        Kernel driver in use: dvb
        Kernel modules: dvb-ttpci

04:02.0 0200: 8086:107c (rev 05)
        Subsystem: 8086:1376
        Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 18
        Memory at fbcc0000 (32-bit, non-prefetchable) [size=128K]
        Memory at fbce0000 (32-bit, non-prefetchable) [size=128K]
        I/O ports at ccc0 [size=64]
        Expansion ROM at 88000000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
        Capabilities: [e4] PCI-X non-bridge device
        Kernel driver in use: e1000
        Kernel modules: e1000




sudo v4l2-ctl -n

Code Select Expand



ioctl: VIDIOC_ENUMINPUT
        Input   : 0
        Name    : DVB
        Type    : 0x00000002
        Audioset: 0x00000001
        Tuner   : 0x00000000
        Standard: 0x0000000000001007 ( PAL NTSC )
        Status  : 0



Thanks replying back
I tried the first suggestion but I think I had bad install.

Mandingo: You know what, I am back to LinuxMCE just because of your posts and your dedication to have the DVB drivers running in LinuxMCE.

To answer your questions
1- Yes I do have DVB-S Nexus-S, installed. I have 2 cards I might need your help installing both on the same system.
2- I don't get any error installing the first part of the OS, the system boots just fine, installing LinuxMCE casing the issure. now that I have a fresh install, I will try the beta2 suggested installation.

thanks for your help, I will report back...

Hello all,

I did a fresh install, then
sudo apt-get update
sudo apt-get dist-upgrade
now when I run LinuxMCE installer I get the following error:

Code Select Expand


                                                                               
mysql-server is already the newest version.                                                                                                                                                         
The following packages were automatically installed and are no longer required:                                                                                                                     
  fakeroot nvidia-195-kernel-source linux-headers-2.6.27-15                                                                                                                                         
  linux-headers-2.6.27-15-generic linux-headers-2.6.27-7 nvidia-settings                                                                                                                             
  linux-headers-2.6.27-7-generic nvidia-195-libvdpau libglide2 dkms                                                                                                                                 
Use 'apt-get autoremove' to remove them.                                                                                                                                                             
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.                                                                                                                                       
* Starting MySQL database server mysqld                                                                                                                                                             
   ...done.                                                                                                                                                                                         
Reading package lists...                                                                                                                                                                             
Building dependency tree...                                                                                                                                                                         
Reading state information...                                                                                                                                                                         
pluto-sample-media is already the newest version.                                                                                                                                                   
The following packages were automatically installed and are no longer required:                                                                                                                     
  fakeroot nvidia-195-kernel-source linux-headers-2.6.27-15                                                                                                                                         
  linux-headers-2.6.27-15-generic linux-headers-2.6.27-7 nvidia-settings                                                                                                                             
  linux-headers-2.6.27-7-generic nvidia-195-libvdpau libglide2 dkms
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
video-wizard-videos is already the newest version.
The following packages were automatically installed and are no longer required:
  fakeroot nvidia-195-kernel-source linux-headers-2.6.27-15
  linux-headers-2.6.27-15-generic linux-headers-2.6.27-7 nvidia-settings
  linux-headers-2.6.27-7-generic nvidia-195-libvdpau libglide2 dkms
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
MESSAGE: Installing LinuxMCE Base Software
Reading package lists...
Building dependency tree...
Reading state information...
Package pluto-dcerouter is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package pluto-dcerouter has no installation candidate

ERROR : Failed to install and configure the base software

Running post-install.sh
post-install.sh: line 2: /usr/pluto/bin/nvidia-install.sh: No such file or directory
You must specify at least one of -c, -u, or -d.

Usage: /usr/sbin/update-initramfs [OPTION]...

Options:
-k [version]   Specify kernel version or 'all'
-c             Create a new initramfs
-u             Update an existing initramfs
-d             Remove an existing initramfs
-t             Take over a custom initramfs with this one
-b             Set alternate boot directory
-v             Be verbose
-h             This message


The first phase of the install process is completed
Reboot the system to start the final process.

Done!


Thanks for  your help!

Any new progress?