Messages

Thanx for new commands I did not know existed! =)

This lines in "dmesg" output indicate that this camera got a driver loaded:

[   67.528719] Linux video capture interface: v2.00
[   67.667196] uvcvideo: Found UVC 1.00 device QEye 2.0M pixel (04f2:a142)
[   67.668368] usbcore: registered new interface driver uvcvideo
[   67.668420] USB Video Class driver (v0.1.0)

But there was no "/dev/video" in the output (From the MD, where the camera are attached)

And I have done some googling already, and tested every solution suggested in wiki / forums that seems to be related.
..been stuck with this for almost 48 hours..  =)

/Peter

Hi!

Lets start this question with the fact that i am absolutely new to linux and lmce.. But I like it!

As I have three usb cameras, and can not get any of them to function, I would really be happy if someone could help me, and explain exactly how to make a template for the most advanced of them, the Qeye that is so nicely fitted into my new BenQ M2200HD screen. And yes, I have tryed to use every thread i could find here, related to this.

The camera has, according to the output of "lsusb -v" a built in microphone.  Could one use this output in any way for the template to get the camera working?  I have spended most of two days trying to make a template on my own, and yes it loads alright, pnp-finds the camera by vendor id, but how i try i never get any picture from the camera..

..Any help are welcome..
Thanks in advance!
/Peter

Part of the lsusb -v output:



Bus 005 Device 005: ID 04f2:a142 Chicony Electronics Co., Ltd
Device Descriptor:
 bLength                18
 bDescriptorType         1
 bcdUSB               2.00
 bDeviceClass          239 Miscellaneous Device
 bDeviceSubClass         2 Common Class
 bDeviceProtocol         1 Interface Association
 bMaxPacketSize0        64
 idVendor           0x04f2 Chicony Electronics Co., Ltd
 idProduct          0xa142
 bcdDevice            1.00
 iManufacturer           1 Chicony Corp.
 iProduct                2 QEye 2.0M pixel
 iSerial                 0
 bNumConfigurations      1
 Configuration Descriptor:
   bLength                 9
   bDescriptorType         2
   wTotalLength          783
   bNumInterfaces          4
   bConfigurationValue     1
   iConfiguration          0
   bmAttributes         0x80
     (Bus Powered)
   MaxPower              320mA
   Interface Association:
     bLength                 8
     bDescriptorType        11
     bFirstInterface         0
     bInterfaceCount         2
     bFunctionClass         14 Video
     bFunctionSubClass       3 Video Interface Collection
     bFunctionProtocol       0
     iFunction               2 QEye 2.0M pixel
   Interface Descriptor:
     bLength                 9
     bDescriptorType         4
     bInterfaceNumber        0
     bAlternateSetting       0
     bNumEndpoints           1

.....