Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Pabla007

Pages: [1]
1
Installation issues / Unable to install 8.10 lmce
« on: December 15, 2009, 07:38:55 am »
 I am unable to install 7.10 linuxmce and 8.10.
(motherboard)I am using ecs Elitegroup A740gm-m v1.0.

I tryed so many time time and i was unable to install. It stop responding while lmce being install.
I have been trying to install lmce for 1 year now.

need some help.
I need to install on this motherboard because i bought this for lmce only
hardware.

# Form factor Micro ATX
# Compatible Processors Athlon 64 X2 , Sempron , Athlon 64 , Sempron X2 , Phenom X3 , Phenom X4
# 64-bit Processor Compatibility Yes
# Mainboard processor socket Socket AM2+
# Mainboard / Multi-Core Support Dual-Core / Triple-core / Quad-core
# Chipset Type AMD 740G / AMD SB700
# Data bus speed 1000.0 MHz
# BIOS type AMI
# Storage key information Serial ATA-300 (RAID) , ATA-133
# Power connectors 4-pin ATX12V connector , 24-pin main power connector
# Processor
# Installed Qty (Max Supported) 0.0 ( 1.0 )
# Memory
# Supported RAM Technology DDR2 SDRAM
# RAM Installed ( Max ) 0.0 MB / 16.0 GB (max)
# Supported RAM Speed PC2-6400 , PC2-4300 , PC2-5300 , PC2-3200
# RAM Features Two DDR channels
# Video
# Graphics Controller Shared video memory (UMA)
# Audio
# Audio Output Sound card
# Audio codec IDT 92HD202
# Sound Output Mode 5.1 channel surround
# Audio output compliant standards High Definition Audio
# Telecom / Networking
# Modem None
# Networking Network adapter - Fast Ethernet , - Ethernet , - Gigabit Ethernet
# Features
# BIOS Features DMI support , Multi Boot , ACPI 3.0 support
# Expansion / Connectivity
# Expansion Slots Total (Free) 2.0 Processor - DIMM 240-pin , 2.0 Memory - LGA775 Socket , 1.0 PCI Express x1 , 1.0 PCI Express x16 , 1.0 PCI
# Storage Interfaces AMD SB700 : ATA-133 - connector(s): 6 x 7pin Serial ATA - 6.0 device(s) - RAID 0 / RAID 1 / RAID 10 , AMD SB700 : Serial ATA-300 - connector(s): 1 x 40pin IDC - 2.0 device(s)
# Interfaces 1.0 x Microphone - Line-out - 15 pin HD D-Sub (HD-15) , 1.0 x Display / video - Input - 34 pin IDC , 1.0 x Keyboard - DVI-Digital - 9 pin D-Sub (DB-9) , 1.0 x Network - Generic - Mini-phone 3.5 mm , 1.0 x Hi-Speed USB - RS-232 - 4 pin USB Type A , 1.0 x Audio - Line-in - 24 pin digital DVI , 1.0 x Audio - Generic - Mini-phone stereo 3.5 mm , 1.0 x Serial - Ethernet 10Base-T/100Base-TX/1000Base-T - 6 pin mini-DIN (PS/2 style) , 4.0 x Display / video - VGA - 6 pin mini-DIN (PS/2 style) , 1.0 x Mouse - Floppy interface - RJ-45 , 1.0 x Storage - Mini-phone stereo 3.5 mm
# Additional connectors (optional) 6 x Hi-Speed USB
# Microsoft Certifications Certified for Windows Vista
# Compliant Standards ACPI 3.0 , Plug and Play , RoHS

2
Installation issues / Re: how to set linux mce on Kubuntu 8.10
« on: February 05, 2009, 05:04:39 am »
I download LinuxMCE-DVD-i386-rc2 . It did not work on my machine.  I have "A740GH-M" MotherBoard. Name of brand "ECS". I tryed so many time and it did not work. When i boot from cd  then I get this msg "BusyBox V1.1.3 (Debian 1:1.1.3-5ubuntu7) Built-in shell (ash)  Enter 'help' for a list of built-in commands.
(initramfs)"


Help me

3
Installation issues / Re: Kubuntu 8.10 instalation
« on: February 05, 2009, 04:58:42 am »
I download LinuxMCE-DVD-i386-rc2 . It did not work on my machine.  I have "A740GH-M" MotherBoard. Name of brand "ECS". I tryed so many time and it did not work. When i boot from cd  then I get this msg "BusyBox V1.1.3 (Debian 1:1.1.3-5ubuntu7) Built-in shell (ash)  Enter 'help' for a list of built-in commands.
(initramfs)"


Help me

4
Installation issues / Re: how to set linux mce on Kubuntu 8.10
« on: February 04, 2009, 03:31:49 am »
is there any link other than this
http://wiki.linuxmce.org/index.php/Mirrors_0710_beta_3


This link is really slow for downloading.
Official Torrents is really slow.
Do you guys know any other website.


5
Installation issues / how to set linux mce on Kubuntu 8.10
« on: February 03, 2009, 11:45:01 pm »
I have just installed Kubuntu 8.10 and now i would like to set on top Linux MCE. How can i do that. I have 64bit. I really need help on this.

6
Installation issues / Re: blank screen when starting to install 64bit
« on: January 07, 2009, 08:55:42 am »
I have try to set 64amd, I was un able to. I download so many DVD and burn and none of them worked.

it goes blank right after i press "install" i dont know how far it gets into it but there is a prompt somewhere you have to write command line.
I really need help.


7
Installation issues / Re: Did the USB-UIRT kill my system?
« on: January 07, 2009, 08:44:22 am »
I Have 64AMD For some reason i can not install this anymore. Need Help Please.
This is how far i got. I am new to linux mce





What I should do after this step

8
I was able to install 32bit, but now i have new computer, which is 64bit and trying to set linux MCE on that one. I am unable to do. Here are pix. I have no clue what to do.

What should i do to install this OS

Pages: [1]