1
Users / Re: Zwave device stops working and fails to restart
« on: January 06, 2011, 01:27:32 am »
So far so good for me.
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
LinuxMCE sponsor
open.home.automation
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Users / Re: ZOTAC ZBOX HD-ID11-U
« on: January 05, 2011, 01:23:46 am »
I just added a zbox hd-nd02 a couple days ago. I had issues, but resolved them by going in BIOS and upping the GPU memory to 512 and enabling PXE boot. I also had to run nvidia-xconfig (i went on core, and chroot /usr/pluto/diskless/390). It's been running great.
3
Users / Re: web admin only allowing https? breaking imdb...
« on: January 04, 2011, 03:35:36 pm »
I never made any changes to anything related to apache, and it has worked fine until I did the update. I had not updated since early october. I'll open a trac ticket.
4
Users / Re: Zwave device stops working and fails to restart
« on: January 04, 2011, 03:33:53 pm »
I am seeing the same issues with my stick. It has worked flawless for the past year, then I upgraded and Zwave hangs every day. I literally have to remove it, and plug it back in before it will work. After a day or so, it will stop responding again. zwave driver problem maybe?
Here is a truncated log. This repeated several times then stopped at 00:22.
05 01/02/11 21:55:04.913 ERROR: ZW_SEND could not be delivered to Z-Wave stack <0xb7133b90>
05 01/02/11 21:55:05.168 ERROR: callback id is invalid! <0xb7133b90>
05 01/02/11 21:58:11.936 No callback received: await_callback: 233 timer: 31 <0xb7133b90>
05 01/02/11 22:05:44.356 No callback received: await_callback: 22 timer: 31 <0xb7133b90>
01 01/04/11 0:20:42.978 ERROR! Out of frame flow!! <0xb71a9b90>
01 01/04/11 0:20:42.979 Checksum incorrect ff - sending NAK <0xb71a9b90>
01 01/04/11 0:20:42.980 ERROR! Out of frame flow!! <0xb71a9b90>
05 01/04/11 0:22:34.889 No callback received: await_callback: 147 timer: 31 <0xb71a9b90>
05 01/04/11 0:22:38.089 No callback received: await_callback: 147 timer: 31 <0xb71a9b90>
05 01/04/11 0:22:41.289 No callback received: await_callback: 147 timer: 31 <0xb71a9b90>
01 01/04/11 0:22:41.289 ERROR: Dropping command, no callback received after three resends <0xb71a9b90>
01 01/04/11 0:22:41.289 ERROR: Three dropped commands in a row, soft-resetting controller <0xb71a9b90>
Here is a truncated log. This repeated several times then stopped at 00:22.
05 01/02/11 21:55:04.913 ERROR: ZW_SEND could not be delivered to Z-Wave stack <0xb7133b90>
05 01/02/11 21:55:05.168 ERROR: callback id is invalid! <0xb7133b90>
05 01/02/11 21:58:11.936 No callback received: await_callback: 233 timer: 31 <0xb7133b90>
05 01/02/11 22:05:44.356 No callback received: await_callback: 22 timer: 31 <0xb7133b90>
01 01/04/11 0:20:42.978 ERROR! Out of frame flow!! <0xb71a9b90>
01 01/04/11 0:20:42.979 Checksum incorrect ff - sending NAK <0xb71a9b90>
01 01/04/11 0:20:42.980 ERROR! Out of frame flow!! <0xb71a9b90>
05 01/04/11 0:22:34.889 No callback received: await_callback: 147 timer: 31 <0xb71a9b90>
05 01/04/11 0:22:38.089 No callback received: await_callback: 147 timer: 31 <0xb71a9b90>
05 01/04/11 0:22:41.289 No callback received: await_callback: 147 timer: 31 <0xb71a9b90>
01 01/04/11 0:22:41.289 ERROR: Dropping command, no callback received after three resends <0xb71a9b90>
01 01/04/11 0:22:41.289 ERROR: Three dropped commands in a row, soft-resetting controller <0xb71a9b90>
5
Users / Re: web admin only allowing https? breaking imdb...
« on: January 03, 2011, 04:49:12 am »
removed /etc/apache2/sites-enabled/default-ssl and could access over http again.
Any explanations? Future feature?
Any explanations? Future feature?
6
Users / Re: web admin only allowing https? breaking imdb...
« on: January 03, 2011, 04:42:43 am »
When apache2 is restarted
dcerouter_1011713:/etc/apache2# service apache2 restart
* Restarting web server apache2
apache2: Could not reliably determine the server's fully qualified domain name, using 192.168.80.1 for ServerName
[Sun Jan 02 22:42:00 2011] [error] VirtualHost _default_:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results
[Sun Jan 02 22:42:00 2011] [error] VirtualHost _default_:443 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results
[Sun Jan 02 22:42:00 2011] [warn] NameVirtualHost _default_:443 has no VirtualHosts
[Sun Jan 02 22:42:00 2011] [warn] NameVirtualHost _default_:80 has no VirtualHosts
... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 192.168.80.1 for ServerName
[Sun Jan 02 22:42:01 2011] [error] VirtualHost _default_:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results
[Sun Jan 02 22:42:01 2011] [error] VirtualHost _default_:443 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results
[Sun Jan 02 22:42:01 2011] [warn] NameVirtualHost _default_:443 has no VirtualHosts
[Sun Jan 02 22:42:01 2011] [warn] NameVirtualHost _default_:80 has no VirtualHosts
...done.
dcerouter_1011713:/etc/apache2# service apache2 restart
* Restarting web server apache2
apache2: Could not reliably determine the server's fully qualified domain name, using 192.168.80.1 for ServerName
[Sun Jan 02 22:42:00 2011] [error] VirtualHost _default_:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results
[Sun Jan 02 22:42:00 2011] [error] VirtualHost _default_:443 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results
[Sun Jan 02 22:42:00 2011] [warn] NameVirtualHost _default_:443 has no VirtualHosts
[Sun Jan 02 22:42:00 2011] [warn] NameVirtualHost _default_:80 has no VirtualHosts
... waiting apache2: Could not reliably determine the server's fully qualified domain name, using 192.168.80.1 for ServerName
[Sun Jan 02 22:42:01 2011] [error] VirtualHost _default_:80 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results
[Sun Jan 02 22:42:01 2011] [error] VirtualHost _default_:443 -- mixing * ports and non-* ports with a NameVirtualHost address is not supported, proceeding with undefined results
[Sun Jan 02 22:42:01 2011] [warn] NameVirtualHost _default_:443 has no VirtualHosts
[Sun Jan 02 22:42:01 2011] [warn] NameVirtualHost _default_:80 has no VirtualHosts
...done.
7
Users / Re: web admin only allowing https? breaking imdb...
« on: January 03, 2011, 03:57:51 am »
From the apache log
--2011-01-02 21:56:37-- http://192.168.80.1/lmce-admin/coverArtExtractor_IMDB.php?fileID=15127&searchIndex=DVD&Keyword1Type=Keywords&Keyword1Search=Going+the+Distance++2010+
Connecting to 192.168.80.1:80... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `STDOUT'
0K 88.7M=0s
2011-01-02 21:56:37 (88.7 MB/s) - `-' saved [603]
--2011-01-02 21:56:37-- http://192.168.80.1/lmce-admin/coverArtExtractor_IMDB.php?fileID=15127&searchIndex=DVD&Keyword1Type=Keywords&Keyword1Search=Going+the+Distance++2010+
Connecting to 192.168.80.1:80... connected.
HTTP request sent, awaiting response... 200 No headers, assuming HTTP/0.9
Length: unspecified
Saving to: `STDOUT'
0K 88.7M=0s
2011-01-02 21:56:37 (88.7 MB/s) - `-' saved [603]
8
Users / web admin only allowing https? breaking imdb...
« on: January 03, 2011, 02:31:15 am »
After updating the core, I went to the web admin and found this:
I switch to https and it works, but this breaks imdb, which loads http://192.168.80.1/lmce-admin/coverArtExtractor_IMDB.php
Was this by design or did something get botched during the upgrade? I can't seem to find the setting or why this has changed.
Code: [Select]
Bad Request
Your browser sent a request that this server could not understand.
Reason: You're speaking plain HTTP to an SSL-enabled server port.
Instead use the HTTPS scheme to access this URL, please.
Hint: https://192.168.80.1/
Apache/2.2.9 (Ubuntu) PHP/5.2.6-2ubuntu4.6 with Suhosin-Patch mod_ssl/2.2.9 OpenSSL/0.9.8g Server at 192.168.80.1 Port 443I switch to https and it works, but this breaks imdb, which loads http://192.168.80.1/lmce-admin/coverArtExtractor_IMDB.php
Was this by design or did something get botched during the upgrade? I can't seem to find the setting or why this has changed.
9
Users / Re: OpenVPN
« on: November 28, 2010, 05:42:42 pm »
The only ones that will be modified are the firewall script, and the sysctl.conf file. Both changes are required for openvpn, but not pptpd. I see no reason why the pptpd vpn can't be included, even if the changes can't be made for openvpn.
10
Users / Re: OpenVPN
« on: November 15, 2010, 11:28:51 pm »it has not.
I have been looking at it lately, but it will need a lot of work to make it play nice with all the other parts of LinuxMCE.
What other parts must it play nice with? And what kind of work does it need?
11
Feature requests & roadmap / Re: 810 64 bit support
« on: September 06, 2010, 04:02:46 am »
Hmm, donpaul I'm not sure I follow, the information you posted shows only 5MB of cache being used and 0.75GB of RAM still available...
J
Yeah, haha, I see the confusion. I moved my python scripts to a separate server and rebooted. I was only pointing out that it's fine when not running the other crap, and there is nothing out or normal running on the server.
12
Feature requests & roadmap / Re: 810 64 bit support
« on: September 03, 2010, 12:58:51 am »That's too bad, since 32G is holds us below 4G memory. I have tried adding a couple features to linuxmce but I run out of memory. I was swapping 2G at one point when running some python code.
I just have to ask... what are you doing that swaps 2GB of RAM??? :-O I can't fathom anything in this system requiring that much RAM for any task.
J.
I ran sabnzbd and sickbeard, 2 python scripts. I can home yesterday to a 2G swap in use.
What I see now:
Cpu(s): 0.6%us, 1.6%sy, 0.0%ni, 96.9%id, 0.0%wa, 0.3%hi, 0.5%si, 0.0%st
Mem: 3240868k total, 2495556k used, 745312k free, 238568k buffers
Swap: 10304588k total, 4976k used, 10299612k free, 1661372k cached
13
Feature requests & roadmap / Re: 810 64 bit support
« on: September 02, 2010, 07:26:29 pm »
That's too bad, since 32G is holds us below 4G memory. I have tried adding a couple features to linuxmce but I run out of memory. I was swapping 2G at one point when running some python code.
Being stuck on 32 bit is embarrassing and frustrating. Guess I'll recompile my kernel for hugemem.
Being stuck on 32 bit is embarrassing and frustrating. Guess I'll recompile my kernel for hugemem.
14
Installation issues / Re: Cannot get tricklestar to work! [SOLVED]
« on: August 09, 2010, 03:39:26 am »15
Installation issues / Re: Solo USB microphone problem
« on: August 02, 2010, 09:57:40 pm »
I finally invested in a Solo mic, only to be let down when I plugged it in and it didn't work. 