Messages

1

Users / Re: Installing insteon and X10

« on: September 23, 2008, 09:33:57 pm »

i get this just trying to get it running

Failed loading code: Error loading code:
error: (eval):2364: compile error
(eval):43: Invalid char `\302' in expression
(eval):43: Invalid char `\240' in expression
(eval):44: Invalid char `\302' in expression
(eval):44: Invalid char `\240' in expression, line: 2364


And what are these commands you had to remove? I dont see them referenced anywhere...

I haven't seen those errors. But when i installed (add everything as per the wiki) then in the ruby list there will be 141 and 161 remove those from the list... that should take away other issues. But it looks like you either missed something when you added the code, or left something in that didn't need to be.

Are you cutting and pasting only the listed code into each corresponding box? Maybe post what you have in each field for the ruby code...

2

Users / Re: Installing insteon and X10

« on: September 22, 2008, 12:06:14 am »

Sorry i haven't been around things are nuts around here.

SO for my linuxmce Insteon setup i have a PLM hooked up with an extension cord to a power outlet. I have 1 insteon light switch linked to it.

I only have 2 lights switches.

I found once i got the system to boot up and run without errors i added the lights in manually, watched the logs until it ends and reports the child devices then restart the router.

I kept doing this until all my switches were in and had configuration showing.

The other key is if you are showing a lot of time outs then unplug your PLM from the wall and plug it back in then reboot the core (not restart) then it seems to work.

I still can't get X10 to work though, as i have only 1 serial port. So i am going to try to put my X10 firecracker on my media director and see if that works.

3

Users / Re: Multiple Web Orbiters.

« on: September 19, 2008, 05:42:31 pm »

That's what i was noticing to. I wonder if i tried doing a different port, but the same generic web proxy if it would work. i will continue playing. I am just hoping we can work it out... thanks for the response.

4

Users / Re: Multiple Web Orbiters.

« on: September 18, 2008, 02:34:56 pm »

So i know in another thread it was said that this could be done, but no where can i find info on how to do this.

I have done some thinking and digging, everything i have tried has not worked , but i have another idea, but i want some ideas if i can before i dig into it.

I was thinking that the issue may be adding 2 generic web orbiters as an attempt to use them. If i take the settings from the generic web orbiter template and create a Ipod or Mobile web orbiter template and do the same with the proxy orbiter. I think this would stop the two interfaces from conflicting..

Can anyone shine some light on this? I really like this product, but so far the two issues i have had don't seem to get much help from the community... PLEASE give me some guidance if you can...

5

Users / Multiple Web Orbiters.

« on: September 16, 2008, 05:44:41 pm »

I am trying to setup more then one web orbiter.

I create the generic web orbiter and call it desktop
then change the associated proxy orbiter to Desktop

I create generic web orbiter called Mobile
then change the associated proxy orbiter to mobile

change the mobile one to a smaller screen..

but the change seems to force into both orbiters.

What i want is to be able to connect with a web orbiter from work to check on things and work on things, and use the web orbiter on my ipod touch to use as a remote in the house, on the touch the screen scales but is hard to read if i don't re-size... but i can't seem to have different ones running,.

any help?

JQE.

6

Users / Re: Installing insteon and X10

« on: September 13, 2008, 09:52:20 pm »

Bump...

SO insteon lights work 100% now.

X10 lights work until a reload and then they remove themselves from LinuxMCE.

I am thinking of adding my firecracker and using bottle rocket for the X10 stuff, and that will solve my issue i think.. anyways.. if anyone can help me get X10 working through my PLM that would be great.

7

Users / Re: Installing insteon and X10

« on: September 12, 2008, 03:52:47 am »

OK this is what is happening for me.. and here is the log.

Code: [Select]

/var/log/pluto/37_Generic_Serial_Device.log(***):sendGetNext ACKED
(***):LnkData Message Received
(***):{"Parameter1"=>"02", "Parameter2"=>"57", "Parameter3"=>"E2", "Parameter4"=>"01", "Parameter5"=>"A5", "Response"=>"LnkData", "Parameter6"=>"00", "Parameter7"=>"00", "Parameter10"=>"FF", "Parameter8"=>"01", "Parameter9"=>"01"}
(***):FOUND X10 DEVICE!!!
(***):record Flags:E2
(***):Controller
(***):Insteon ID:A5, Group:01
(***):Command Completed.
(***):SndIns:Queue:3
(***):out:02 6A Length:2
(***):IN:02 6A 15 Length:3
(***):sendGetNext NACKED
(***):Command Completed.
(***):Entered CheckChildRecordsinPLM
(***):Record: = 0D.71.C5 Group:01
(***):checking to see if it needs to be added as a child...
(***):ExistsinChild:InsteonID:0D.71.C5
(***):ExistsinChild result:TRUE
(***):Record: = 0D.70.E6 Group:01
(***):checking to see if it needs to be added as a child...
(***):ExistsinChild:InsteonID:0D.70.E6
(***):ExistsinChild result:TRUE
(***):Record: = A5.00.00 Group:01
(***):checking to see if it needs to be added as a child...
(***):ExistsinChild:InsteonID:A5.00.00
(***):ExistsinChild result:FALSE
(***):A5.00.00 needs to be added to the child database
(***):addtochild Routne called
(***):Adding A5.00.00 to the child database...
(***):Child is Insteon
(***):PING Sent!
(***):0D.71.C5 exists in PLM
(***):0D.70.E6 exists in PLM
(***):0D.70.E6 exists in PLM
(***):0D.70.E6 exists in PLM
(***):0D.71.C5 exists in PLM
(***):A5.00.00 exists in PLM
(***):A5 needs to be added to PLM
(***):Adding A5 to the PLM database...
(***):SndIns:Queue:4
(***):out:02 6F 40 C2 01 A5 00 00 01 01 FF Length:11
(***):X-----------SndIns: Waiting for response to:MngLnk
(***):X-----------SndIns: Current Queue Length:4
(***):IN:02 6F 40 C2 01 A5 00 00 01 01 FF 15 Length:12
(***):MngLnk => NACK
(***):Command Completed.
(***):SndIns:Queue:3
(***):out:02 62 0D 71 C5 0F 19 00 Length:8
(***):IN:02 62 0D 71 C5 0F 19 00 06 Length:9
(***):IN:02 50 0D 71 C5 0E DB 5D 2B 00 00 Length:11
(***):Command Completed.
(***):Processing 0x19 Status Report
(***):Database Delta=00
(***):Configuration is:00
(***):From:38
(***):current State:
(***):Wanted State:0
(***):ReportStatus: device:38 Status:0
(***):SndIns:Queue:2
05 09/11/08 20:49:35.392 GSDMessageTranslator isCmdImplemented = false <0x42003950>
05 09/11/08 20:49:35.397 #### Pre-Process Queue = 1 <0x42003950>
05 09/11/08 20:49:35.434 _QueueProc Pre - 193 : 0 <0x40800950>
05 09/11/08 20:49:35.434 GSD-Sleep Pre 193 : 0 <0x40800950>
05 09/11/08 20:49:35.434 Process Queue = 1 <0x40800950>
(***):out:02 62 0D 70 E6 0F 19 00 Length:8
(***):------dce--- cmdID:193, cmdFrom:38, cmdTo:38, cmdType:1, Priority:1
(***):Detected Command sent to Self!
05 09/11/08 20:49:35.534 GSD-Sleep Post 193 : 0 <0x40800950>
05 09/11/08 20:49:35.534 _QueueProc Post - 193 : 0 <0x40800950>
(***):IN:02 62 0D 70 E6 0F 19 00 06 Length:9
(***):IN:02 50 0D 70 E6 0E DB 5D 2B 00 00 Length:11
(***):Command Completed.
(***):Processing 0x19 Status Report
(***):Database Delta=00
(***):Configuration is:00
(***):From:39
(***):current State:
(***):Wanted State:0
(***):ReportStatus: device:39 Status:0
(***):SndIns:Queue:1
05 09/11/08 20:49:36.388 GSDMessageTranslator isCmdImplemented = false <0x42003950>
05 09/11/08 20:49:36.389 #### Pre-Process Queue = 1 <0x42003950>
05 09/11/08 20:49:36.430 _QueueProc Pre - 193 : 0 <0x40800950>
05 09/11/08 20:49:36.430 GSD-Sleep Pre 193 : 0 <0x40800950>
05 09/11/08 20:49:36.430 Process Queue = 1 <0x40800950>
(***):out:02 62 A5 00 00 0F 10 00 Length:8
(***):------dce--- cmdID:193, cmdFrom:39, cmdTo:39, cmdType:1, Priority:1
(***):Detected Command sent to Self!
05 09/11/08 20:49:36.527 GSD-Sleep Post 193 : 0 <0x40800950>
05 09/11/08 20:49:36.527 _QueueProc Post - 193 : 0 <0x40800950>
(***):IN:02 62 A5 00 00 0F 10 00 06 Length:9
(***):Got PING ACK
(***):receive timeout=1
(***):receive timeout=2
(***):receive timeout=3
(***):Command Stalled!  resetting and retrying
(***):Current Command:1
(***):SndIns:Queue:1
(***):out:02 62 A5 00 00 0F 10 00 Length:8
(***):IN:02 62 A5 00 00 0F 10 00 06 Length:9
(***):Got PING ACK
(***):receive timeout=1
(***):receive timeout=2
(***):receive timeout=3
(***):Command Stalled!  resetting and retrying
(***):Current Command:1
(***):SndIns:Queue:1
(***):out:02 62 A5 00 00 0F 10 00 Length:8
(***):IN:02 62 A5 00 00 0F 10 00 06 Length:9
(***):Got PING ACK
(***):receive timeout=1
(***):receive timeout=2
(***):receive timeout=3
(***):Third attempt, Failing Command!
(***):in RemoveCurrentCommand
(***):Current Command:{"Parameter1"=>"A5", "Parameter2"=>"00", "Parameter3"=>"00", "Parameter4"=>"0F", "Command"=>"InsStdMsg", "Parameter5"=>"10", "Parameter6"=>"00"}
(***):ID=A5.00.00
(***):Removing A5.00.00 from child database
(***):Removing from plm
(***):DEBUG:45 32 30 31 41 35 30 30 30 30 30 31 30 31 46 46 Length:16
(***):Found Record, Deleting
(***):{"Parameter1"=>"80", "Parameter2"=>"E2", "Parameter3"=>"01", "Parameter4"=>"A5", "Command"=>"MngLnk", "Parameter5"=>"00", "Parameter6"=>"00", "Parameter7"=>"01", "Parameter8"=>"01", "Parameter9"=>"FF"}
(***):Command Completed.
(***):SndIns:Queue:1
(***):out:02 6F 80 E2 01 A5 00 00 01 01 FF Length:11
(***):IN:02 6F 80 E2 01 A5 00 00 01 01 FF 06 Length:12
(***):MngLnk => ACK
(***):Command Completed.
(***):Queue Empty.
(***):RERUN=TRUE, RESTARTING
(***):SndIns:Queue:1
(***):out:02 62 0D 71 C5 0F 19 00 Length:8
(***):X-----------SndIns: Waiting for response to:SndIns
(***):X-----------SndIns: Current Queue Length:2
(***):X10 does not report status
(***):X-----------SndIns: Waiting for response to:SndIns
(***):X-----------SndIns: Current Queue Length:2
(***):IN:02 62 0D 71 C5 0F 19 00 06 Length:9
(***):IN:02 50 0D 71 C5 0E DB 5D 2B 00 00 Length:11
(***):Command Completed.
(***):Processing 0x19 Status Report
(***):Database Delta=00
(***):Configuration is:00
(***):From:38
(***):current State:0
(***):Wanted State:0
(***):ReportStatus: device:38 Status:0
(***):SndIns:Queue:1
(***):out:02 62 0D 70 E6 0F 19 00 Length:8
(***):IN:02 62 0D 70 E6 0F 19 00 06 Length:9
(***):IN:02 50 0D 70 E6 0E DB 5D 2B 00 00 Length:11
(***):Command Completed.
(***):Processing 0x19 Status Report
(***):Database Delta=00
(***):Configuration is:00
(***):From:39
(***):current State:0
(***):Wanted State:0
(***):ReportStatus: device:39 Status:0
(***):Queue Empty.
(***):RERUN Not needed
(***):Reporting Child Devices
(***):Child:0D.71.C5
(***):Config:["01012700********", "A2010D70E6FE1F00", "E2010D70E6FE1F00"]
(***):Child:0D.70.E6
(***):Config:["01012700********", "E2010D71C5FE1F00"]
(***):Child:A5
(***):Config:["****************"]
(***):0D.71.C5 38
0D.70.E6 38
A5 0
05 09/11/08 20:50:07.711 GSDMessageTranslator isCmdImplemented = false <0x42003950>
05 09/11/08 20:50:07.712 #### Pre-Process Queue = 1 <0x42003950>
05 09/11/08 20:50:07.743 _QueueProc Pre - 192 : 0 <0x40800950>
05 09/11/08 20:50:07.743 GSD-Sleep Pre 192 : 0 <0x40800950>
05 09/11/08 20:50:07.743 Process Queue = 1 <0x40800950>
(***):------dce--- cmdID:192, cmdFrom:0, cmdTo:40, cmdType:1, Priority:1
(***):Processing ON command
(***):------dce--- X10 DEVICE!!!
(***):DeviceID=A5
(***):X10 Byte1:61
(***):SndIns:Queue:2
(***):out:02 63 61 00 Length:4
(***):From:40
(***):current State:
(***):Wanted State:100
(***):ReportStatus: device:40 Status:100
05 09/11/08 20:50:07.905 GSDMessageTranslator isCmdImplemented = false <0x42003950>
05 09/11/08 20:50:07.906 #### Pre-Process Queue = 1 <0x42003950>
05 09/11/08 20:50:07.906 GSDMessageTranslator isCmdImplemented = false <0x42003950>
05 09/11/08 20:50:07.907 GSD-Sleep Post 192 : 0 <0x40800950>
05 09/11/08 20:50:07.907 _QueueProc Post - 192 : 0 <0x40800950>
05 09/11/08 20:50:07.908 #### Pre-Process Queue = 2 <0x42003950>
05 09/11/08 20:50:07.908 GSDMessageTranslator isCmdImplemented = false <0x42003950>
05 09/11/08 20:50:07.909 #### Pre-Process Queue = 3 <0x42003950>
05 09/11/08 20:50:07.909 _QueueProc Pre - 193 : 0 <0x40800950>
05 09/11/08 20:50:07.909 GSD-Sleep Pre 193 : 0 <0x40800950>
05 09/11/08 20:50:07.909 Process Queue = 1 <0x40800950>
(***):------dce--- cmdID:193, cmdFrom:40, cmdTo:40, cmdType:1, Priority:1
(***):Detected Command sent to Self!
05 09/11/08 20:50:07.911 GSD-Sleep Post 193 : 0 <0x40800950>
05 09/11/08 20:50:07.911 _QueueProc Post - 193 : 0 <0x40800950>
05 09/11/08 20:50:07.911 _QueueProc Pre - 192 : 0 <0x40800950>
05 09/11/08 20:50:07.911 GSD-Sleep Pre 192 : 0 <0x40800950>
05 09/11/08 20:50:07.911 Process Queue = 1 <0x40800950>
(***):------dce--- cmdID:192, cmdFrom:40, cmdTo:40, cmdType:1, Priority:1
(***):Detected Command sent to Self!
05 09/11/08 20:50:07.915 GSD-Sleep Post 192 : 0 <0x40800950>
05 09/11/08 20:50:07.915 _QueueProc Post - 192 : 0 <0x40800950>
05 09/11/08 20:50:07.915 _QueueProc Pre - 184 : 0 <0x40800950>
05 09/11/08 20:50:07.915 GSD-Sleep Pre 184 : 0 <0x40800950>
05 09/11/08 20:50:07.915 Process Queue = 1 <0x40800950>
(***):------dce--- cmdID:184, cmdFrom:40, cmdTo:40, cmdType:1, Priority:1
(***):Detected Command sent to Self!
05 09/11/08 20:50:07.919 GSD-Sleep Post 184 : 0 <0x40800950>
05 09/11/08 20:50:07.919 _QueueProc Post - 184 : 0 <0x40800950>
(***):IN:02 63 61 00 06 Length:5
(***):Response detected for SndX10
(***):X10 Command Successfull
(***):Command Completed.
(***):SndIns:Queue:1
(***):out:02 63 62 80 Length:4
(***):IN:15 Length:1
(***):The PLM stopped responding
(***):Please unplug it, and plug it back in
(***):and do a quick reload router.
(***):receive timeout=1
(***):receive timeout=2
(***):receive timeout=3
(***):Command Stalled!  resetting and retrying
(***):Current Command:0
(***):SndIns:Queue:1
(***):out:02 63 62 80 Length:4
(***):IN:02 63 62 80 06 Length:5
(***):Response detected for SndX10
(***):X10 Command Successfull
(***):Command Completed.
(***):Queue Empty.
(***):RERUN Not needed
(***):report not needed

i would like to point out that the X10 light never turned on. I have 2 Insteon switches that work A.O.K now that i moved the PLM to a different power node.

8

Users / Re: Installing insteon and X10

« on: September 11, 2008, 02:27:35 pm »

I don't have it accessible from work yet, should be in the next day or two and i am getting closer.

Last night i had it working properly, my lights worked and all was good. Then it removed my X10 lights.. then a few hours later it removed the rest of my lights. It seems when i add anything X10 it just removes everything.

Also it seems to get into a loop trying to delete the X10 device. Erroring out because it doesn't have 3 parameters. What do you enter for the port number for x10 devices? Just the device id correct? Like A5?

I did not link the PLM to the decive. i will try that tonight. and i will also try the extension cord thing, i thought about that before... does a PLM work plugged into an extension cord?

9

Users / Re: Installing insteon and X10

« on: September 10, 2008, 03:01:31 pm »

I don't have my logs with me, but mine is functioning exactly as williammanda's is.

What i have found is that sometimes it will find my lights switch, it will turn it on, then it will remove itself. I also get an error in code group 351 reading the database_delta.

I will add the logs tonight, as i am at work now, but i followed the Wiki through more than once and it just won't work for me.