Finally bought a Microsoft Remote (A9O-00014 - Windows XP MCE) and it works fine, since I remove other remotes...:$
- Welcome to LinuxMCE Forums.
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages1
#1
Users / Re: Error while trying to install pinsys I/R Receiver on Serial port
February 06, 2008, 09:36:38 PM #2
Installation issues / Re: Error while trying to install pinsys I/R Receiver on Serial port
February 06, 2008, 09:35:29 PM
Finally bought a Microsoft Remote (A9O-00014 - Windows XP MCE) and it works fine, since I remove other remotes...:$
#3
Installation issues / Error while trying to install pinsys I/R Receiver on Serial port
January 27, 2008, 08:22:35 PM
Hello,
I'm trying to install an I/R Receiver from "Pinnacle Systems" (which comes with the PCTV Stereo card) connected to a Serial port, but the device refuses to start. No parameter relates to the Serial port on the Device configuration page in " LinuxMCE Admin". Do I have to modify the template ? Can you help ?
Running Linux MCE0710
========= NEW LOG SECTION ==========
1 01/25/08 09:22:29 44 (spawning-device) Starting... 50
1 01/25/08 09:22:29 44 (spawning-device) Found /usr/pluto/bin/LIRC_DCE
10 01/25/08 9:22:29.201 Device: 44 starting. Connecting to: localhost <0xb79126c0>
10 01/25/08 9:22:29.203 IRReceiverBase::IRReceiverBase r1 0 r2 0 cond 0x80788a8 <0xb79126c0>
10 01/25/08 9:22:29.207 Setting timeout for socket 4 to 20 <0xb79126c0>
10 01/25/08 9:22:29.261 InternalSendCommand id 688 out parm conf -1 resp 0x807f638 <0xb79126c0>
10 01/25/08 9:22:29.261 Socket::SendMessage type 1 id 688 from 44 to -2000 <0xb79126c0>
10 01/25/08 9:22:29.303 InternalSendCommand out done id 688 conf -1 resp 0x807f638 0x807f560 0 type 1 id 688 to -2000 <0xb79126c0>
10 01/25/08 9:22:29.303 InternalSendCommand out id 688 parm exiting conf -1 resp 0x807f638 <0xb79126c0>
10 01/25/08 9:22:29.329 Running modprobe lirc_dev <0xb79126c0>
10 01/25/08 9:22:29.366 Making hardware config <0xb79126c0>
01 01/25/08 9:22:29.366 No SerialPort selected and no default entry found. Exiting. <0xb79126c0>
Return code: 1
3 01/25/08 09:22:29 44 (spawning-device) Device died... count=50/50 dev=44
Fri Jan 25 09:22:29 CET 2008 died
3 01/25/08 09:22:39 44 (spawning-device) Aborting restart of device 44...
I'm trying to install an I/R Receiver from "Pinnacle Systems" (which comes with the PCTV Stereo card) connected to a Serial port, but the device refuses to start. No parameter relates to the Serial port on the Device configuration page in " LinuxMCE Admin". Do I have to modify the template ? Can you help ?
Running Linux MCE0710
========= NEW LOG SECTION ==========
1 01/25/08 09:22:29 44 (spawning-device) Starting... 50
1 01/25/08 09:22:29 44 (spawning-device) Found /usr/pluto/bin/LIRC_DCE
10 01/25/08 9:22:29.201 Device: 44 starting. Connecting to: localhost <0xb79126c0>
10 01/25/08 9:22:29.203 IRReceiverBase::IRReceiverBase r1 0 r2 0 cond 0x80788a8 <0xb79126c0>
10 01/25/08 9:22:29.207 Setting timeout for socket 4 to 20 <0xb79126c0>
10 01/25/08 9:22:29.261 InternalSendCommand id 688 out parm conf -1 resp 0x807f638 <0xb79126c0>
10 01/25/08 9:22:29.261 Socket::SendMessage type 1 id 688 from 44 to -2000 <0xb79126c0>
10 01/25/08 9:22:29.303 InternalSendCommand out done id 688 conf -1 resp 0x807f638 0x807f560 0 type 1 id 688 to -2000 <0xb79126c0>
10 01/25/08 9:22:29.303 InternalSendCommand out id 688 parm exiting conf -1 resp 0x807f638 <0xb79126c0>
10 01/25/08 9:22:29.329 Running modprobe lirc_dev <0xb79126c0>
10 01/25/08 9:22:29.366 Making hardware config <0xb79126c0>
01 01/25/08 9:22:29.366 No SerialPort selected and no default entry found. Exiting. <0xb79126c0>
Return code: 1
3 01/25/08 09:22:29 44 (spawning-device) Device died... count=50/50 dev=44
Fri Jan 25 09:22:29 CET 2008 died
3 01/25/08 09:22:39 44 (spawning-device) Aborting restart of device 44...
#4
Users / Error while trying to install pinsys I/R Receiver on Serial port
January 25, 2008, 02:08:51 PM
Hello,
I'm trying to install an I/R Receiver from "Pinnacle Systems" (which comes with the PCTV Stereo card) connected to a Serial port, but the device refuses to start. No parameter relates to the Serial port on the Device configuration page in " LinuxMCE Admin". Do I have to modify the template ? Can you help ?
Running Linux MCE0710
========= NEW LOG SECTION ==========
1 01/25/08 09:22:29 44 (spawning-device) Starting... 50
1 01/25/08 09:22:29 44 (spawning-device) Found /usr/pluto/bin/LIRC_DCE
10 01/25/08 9:22:29.201 Device: 44 starting. Connecting to: localhost <0xb79126c0>
10 01/25/08 9:22:29.203 IRReceiverBase::IRReceiverBase r1 0 r2 0 cond 0x80788a8 <0xb79126c0>
10 01/25/08 9:22:29.207 Setting timeout for socket 4 to 20 <0xb79126c0>
10 01/25/08 9:22:29.261 InternalSendCommand id 688 out parm conf -1 resp 0x807f638 <0xb79126c0>
10 01/25/08 9:22:29.261 Socket::SendMessage type 1 id 688 from 44 to -2000 <0xb79126c0>
10 01/25/08 9:22:29.303 InternalSendCommand out done id 688 conf -1 resp 0x807f638 0x807f560 0 type 1 id 688 to -2000 <0xb79126c0>
10 01/25/08 9:22:29.303 InternalSendCommand out id 688 parm exiting conf -1 resp 0x807f638 <0xb79126c0>
10 01/25/08 9:22:29.329 Running modprobe lirc_dev <0xb79126c0>
10 01/25/08 9:22:29.366 Making hardware config <0xb79126c0>
01 01/25/08 9:22:29.366 No SerialPort selected and no default entry found. Exiting. <0xb79126c0>
Return code: 1
3 01/25/08 09:22:29 44 (spawning-device) Device died... count=50/50 dev=44
Fri Jan 25 09:22:29 CET 2008 died
3 01/25/08 09:22:39 44 (spawning-device) Aborting restart of device 44...
I'm trying to install an I/R Receiver from "Pinnacle Systems" (which comes with the PCTV Stereo card) connected to a Serial port, but the device refuses to start. No parameter relates to the Serial port on the Device configuration page in " LinuxMCE Admin". Do I have to modify the template ? Can you help ?
Running Linux MCE0710
========= NEW LOG SECTION ==========
1 01/25/08 09:22:29 44 (spawning-device) Starting... 50
1 01/25/08 09:22:29 44 (spawning-device) Found /usr/pluto/bin/LIRC_DCE
10 01/25/08 9:22:29.201 Device: 44 starting. Connecting to: localhost <0xb79126c0>
10 01/25/08 9:22:29.203 IRReceiverBase::IRReceiverBase r1 0 r2 0 cond 0x80788a8 <0xb79126c0>
10 01/25/08 9:22:29.207 Setting timeout for socket 4 to 20 <0xb79126c0>
10 01/25/08 9:22:29.261 InternalSendCommand id 688 out parm conf -1 resp 0x807f638 <0xb79126c0>
10 01/25/08 9:22:29.261 Socket::SendMessage type 1 id 688 from 44 to -2000 <0xb79126c0>
10 01/25/08 9:22:29.303 InternalSendCommand out done id 688 conf -1 resp 0x807f638 0x807f560 0 type 1 id 688 to -2000 <0xb79126c0>
10 01/25/08 9:22:29.303 InternalSendCommand out id 688 parm exiting conf -1 resp 0x807f638 <0xb79126c0>
10 01/25/08 9:22:29.329 Running modprobe lirc_dev <0xb79126c0>
10 01/25/08 9:22:29.366 Making hardware config <0xb79126c0>
01 01/25/08 9:22:29.366 No SerialPort selected and no default entry found. Exiting. <0xb79126c0>
Return code: 1
3 01/25/08 09:22:29 44 (spawning-device) Device died... count=50/50 dev=44
Fri Jan 25 09:22:29 CET 2008 died
3 01/25/08 09:22:39 44 (spawning-device) Aborting restart of device 44...
Pages1