1
Users / Re: iPhone/iPod Touch Orbiter?
« on: January 29, 2010, 05:52:12 pm »
I am game to help with the IPad, i will be getting one when they go on sale
News:
Rule #1 - Be Patient - Rule #2 - Don't ask when, if you don't contribute - Rule #3 - You have coding skills - LinuxMCE's small brother is available: http://www.agocontrol.com
LinuxMCE sponsor
open.home.automation
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1] 2
2
Developers / Re: HADesigner almost working on Linux
« on: April 16, 2008, 06:59:01 pm »
Count me in , setting up dev env now (well not now but when i am at home)
3
Users / Re: PXE over wireless
« on: April 16, 2008, 06:32:50 pm »
I have also tried this with limited success it does work just not well
4
Users / Re: Need help choosing hardware.
« on: April 16, 2008, 06:31:27 pm »
Hello and welcome to linuxmce
i would start by looking at
http://wiki.linuxmce.org/index.php/Category:Hardware
as there is a lot of information there on what does and does not work
we have about 4.5 Tb at home of content and mostly comprised of external drives (cheaper and easier to grow)
not sure if i would do the same if i was going to start from scratch
YMMV
i would start by looking at
http://wiki.linuxmce.org/index.php/Category:Hardware
as there is a lot of information there on what does and does not work
we have about 4.5 Tb at home of content and mostly comprised of external drives (cheaper and easier to grow)
not sure if i would do the same if i was going to start from scratch
YMMV
5
Users / VIA Announces Strategic Open Source Driver Development Initiative
« on: April 09, 2008, 03:51:55 am »
Check it out
http://www.via.com.tw/en/resources/pressroom/pressrelease.jsp?press_release_no=2088
in a nut shell Via will open up http://linux.via.com.tw this month
to support VIA CN700, CX700/M, CN896 and the new VIA VX800 chipsets, with plans to add more later
http://www.via.com.tw/en/resources/pressroom/pressrelease.jsp?press_release_no=2088
in a nut shell Via will open up http://linux.via.com.tw this month
to support VIA CN700, CX700/M, CN896 and the new VIA VX800 chipsets, with plans to add more later
7
Users / Re: Can anyone rip a cd from their Sony XLb3 changer under 0710b3
« on: February 04, 2008, 09:13:09 pm »
sorry for the delay
i also cannot rip cds
i will be able to look more this week
and will join your other thread to see if i can help debug the issue
jeff
i also cannot rip cds
i will be able to look more this week
and will join your other thread to see if i can help debug the issue
jeff
8
Users / Re: Can anyone rip a cd from their Sony XLb3 changer under 0710b3
« on: January 22, 2008, 04:22:32 am »
if you are still having problems i can give it a try this weekend
9
Installation issues / Re: Sony Changer problems
« on: January 19, 2008, 04:57:34 am »
No cd's yet but over 20 DVD's so far
i have it only 1/2 loaded not a bad speed about 1 dvd ever 10-20 min or so depending on dvd size
i have it only 1/2 loaded not a bad speed about 1 dvd ever 10-20 min or so depending on dvd size
10
Installation issues / Re: Sony Changer problems
« on: January 19, 2008, 03:57:15 am »
Yes i am ripping on the Core and changer
i had to manually install the libdvdcss and then reload the core
then the problems went away
i had to manually install the libdvdcss and then reload the core
then the problems went away
11
Installation issues / Re: 0710b3 64bit issues
« on: January 19, 2008, 02:32:52 am »
0710b3 64bit also installed for me
my specs are
Test core/hybread
ASUS M2NPV-VM AM2 NVIDIA GeForce 6150 Micro ATX AMD Motherboard
Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
AMD Athlon 64 X2 5200+ Brisbane 2.7GHz Socket AM2 65W Dual-Core Processor Model ADO5200DOBOX
nMEDIAPC HTPC 100BA Black Steel MicroATX Media Center / HTPC Desktop Computer Case 300W Power Supply
LITE-ON 20X DVD±R DVD Burner with LightScribe Black SATA Model LH-20A1L-06 - Retail
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
my specs are
Test core/hybread
ASUS M2NPV-VM AM2 NVIDIA GeForce 6150 Micro ATX AMD Motherboard
Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
AMD Athlon 64 X2 5200+ Brisbane 2.7GHz Socket AM2 65W Dual-Core Processor Model ADO5200DOBOX
nMEDIAPC HTPC 100BA Black Steel MicroATX Media Center / HTPC Desktop Computer Case 300W Power Supply
LITE-ON 20X DVD±R DVD Burner with LightScribe Black SATA Model LH-20A1L-06 - Retail
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
12
Installation issues / Re: Sony Changer problems
« on: January 19, 2008, 02:29:53 am »
are you using the 64 bit ver if so take a look a my notes http://forum.linuxmce.org/index.php?topic=3876.0
13
Installation issues / 0710b3 64bit install notes
« on: January 19, 2008, 02:28:35 am »
Hello just finished installing 0710 64 Bit
so far here is what i had to do to get it working (did the CD install for 0710-beta3.)
1. read small text (divers did not display well on my test TV)
2. click on install dvdcss (it did not install it read later for correction)
3. play with the drivers for the card (using the wizard, and switching to a std computer mon that can support 1024x768@65Hz)
to install the lib CSS package you need to use the instructions at http://wiki.linuxmce.org/index.php/Restricted_Software_Installation_Guide
basically
sudo apt-get install -y libdvdread3
sudo /usr/share/doc/libdvdread3/install-css.sh
making sure you have the requirements installed for libdvdread3 aready
so far now it looks like its working
my specs are
Sony Vaio VGP-XL1B
Test core/hybread
ASUS M2NPV-VM AM2 NVIDIA GeForce 6150 Micro ATX AMD Motherboard
Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
AMD Athlon 64 X2 5200+ Brisbane 2.7GHz Socket AM2 65W Dual-Core Processor Model ADO5200DOBOX
nMEDIAPC HTPC 100BA Black Steel MicroATX Media Center / HTPC Desktop Computer Case 300W Power Supply
LITE-ON 20X DVD±R DVD Burner with LightScribe Black SATA Model LH-20A1L-06 - Retail
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
so for what works
1. can rip(backup) dvds now
2. Sony Vaio VGP-XL1B also works so far (it did not work in 0704)
3. UI2 with medium settings (masking)
more testing on its way
so far here is what i had to do to get it working (did the CD install for 0710-beta3.)
1. read small text (divers did not display well on my test TV)
2. click on install dvdcss (it did not install it read later for correction)
3. play with the drivers for the card (using the wizard, and switching to a std computer mon that can support 1024x768@65Hz)
to install the lib CSS package you need to use the instructions at http://wiki.linuxmce.org/index.php/Restricted_Software_Installation_Guide
basically
sudo apt-get install -y libdvdread3
sudo /usr/share/doc/libdvdread3/install-css.sh
making sure you have the requirements installed for libdvdread3 aready
so far now it looks like its working
my specs are
Sony Vaio VGP-XL1B
Test core/hybread
ASUS M2NPV-VM AM2 NVIDIA GeForce 6150 Micro ATX AMD Motherboard
Seagate Barracuda 7200.10 ST3250410AS 250GB 7200 RPM SATA 3.0Gb/s Hard Drive
AMD Athlon 64 X2 5200+ Brisbane 2.7GHz Socket AM2 65W Dual-Core Processor Model ADO5200DOBOX
nMEDIAPC HTPC 100BA Black Steel MicroATX Media Center / HTPC Desktop Computer Case 300W Power Supply
LITE-ON 20X DVD±R DVD Burner with LightScribe Black SATA Model LH-20A1L-06 - Retail
CORSAIR XMS2 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400)
so for what works
1. can rip(backup) dvds now
2. Sony Vaio VGP-XL1B also works so far (it did not work in 0704)
3. UI2 with medium settings (masking)
more testing on its way
14
Users / Re: Anyone currently using the hvr-1800 or combo ATSC/QAM (single card)
« on: January 17, 2008, 02:27:23 am »
Hello all the card is only part support with Kernel 2.6.24 http://www.linuxtv.org/wiki/index.php/Hauppauge_WinTV-HVR-1800 i am working on finishing the drivers so i can use both 
15
Users / New DVD/BR changer
« on: January 16, 2008, 05:39:37 pm »
Have a look at the new Sony changer HES-V1000 home media server
http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&productId=8198552921665231960
wondering if this is what is replacing the XL1B 200 CD/DVD disc changer i just bought
not that i could spend the $$ anyway
http://www.sonystyle.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10551&storeId=10151&langId=-1&productId=8198552921665231960
wondering if this is what is replacing the XL1B 200 CD/DVD disc changer i just bought
not that i could spend the $$ anyway
Pages: [1] 2