Messages

Okay, I'll look into this.  I apologize that I hadn't done any install testing yet.

J.

Also looks like it needs a predepends on transmission-daemon package.

Install fails on 1204.

Setting up lmce-transmission-client (2.0.0.46.13091728061) ...
ERROR 1133 (42000) at line 1: Can't find any matching row in the user table
dpkg: error processing lmce-transmission-client (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
lmce-transmission-client
E: Sub-process /usr/bin/dpkg returned an error code (1)

The script downloads everything into the skins directory and qt5 qorbiter is looking for the files in skins/android/ not skins/. Once I copied everthing into skins/android/ I am able to connect on my S4.

QT5 failure on Colby Mid8048 running Android 4.03. Gives this error

Your application encountered a fatal error and cannot continue.

debug log
http://pastebin.com/WJ1Mm02H

http://www.getacoder.com/data/projects/118354/ELK-M1_RS232_PROTOCOL.pdf

sip debug for asp3102 ata ip:
Please note that the spa3102 is serving fro two purposes:
1 - pstn line as a pots trunk - no way no register.
2 - line 1 as a sip extension 204 - this one registers and works.

For the PSTN line setup a phone line in lmce as spa with the phone number (1234567890) as the user and in spa3102 config under pstn line

Line Enable:   yes      

SIP Settings
SIP Port:   5061      

Proxy and Registration
Proxy:   192.168.80.1
Register:   yes   Make Call Without Reg:   yes
Register Expires:   300   Ans Call Without Reg:   yes
 
Subscriber Information
Display Name:   Unknown  Caller   User ID:   phone number
Password:   password   Use Auth ID:   yes
Auth ID:   phone number   


With those settings the spa3102 pstn line registers for me.

Hya,
i did change at the admin page the host to "dynamic" and protocol to "SPA".
Nothing changed, spa3102 showing

Code Select Expand

PSTN Line Status
Hook State: On Line Voltage: 66 (V)
Loop Current: 0.0 (mA) Registration State: Failed

So i did access the mysql asterisk table and under sipdevices, i've found that port was set to 5060, when it should be 5061 (see: http://wiki.linuxmce.org/index.php/Linksys_SPA3102). My older 8.10 also was configured to port 5061

Code Select Expand

peer details:
allow=ulaw
canreinvite=no
context=from-trunk
dtmfmode=rfc2833
host=dynamic
incominglimit=1
nat=never
port=5061
qualify=yes
secret=lmce
type=friend
username=spa3102

So, i did change 5060 to 5061.

Code Select Expand


Host: localhost
Database: asterisk
Generation Time: Sep 12, 2012 at 08:35 PM
Generated by: phpMyAdmin 3.3.2deb1 / MySQL 5.1.63-0ubuntu0.10.04.1
SQL query: SELECT * FROM `sip_devices` LIMIT 0, 30 ;
Rows: 2
id name context callingpres deny permit secret md5secret remotesecret transport host nat type accountcode amaflags callgroup callerid defaultip dtmfmode fromuser fromdomain insecure language mailbox pickupgroup qualify regexten rtptimeout rtpholdtimeout setvar disallow allow fullcontact ipaddr port defaultuser subscribecontext directmedia trustrpid sendrpid progressinband promiscredir useclientcode callcounter busylevel allowoverlap allowsubscribe allowtransfer ignoresdpversion template videosupport maxcallbitrate rfc2833compensate session-timers session-expires session-minse session-refresher t38pt_usertpsource outboundproxy callbackextension registertrying timert1 timerb qualifyfreq contactpermit contactdeny lastms regserver regseconds useragent
1 200 from-internal allowed_not_screened NULL NULL stsnt6114jeps7r3 NULL NULL udp,tcp NULL NULL friend NULL NULL NULL device <200> NULL NULL NULL NULL NULL NULL 200@device NULL NULL NULL NULL NULL NULL NULL alaw;ulaw NULL NULL 5061 200 NULL no NULL NULL NULL NULL NULL NULL NULL yes yes yes no NULL no NULL yes accept 1800 90 uas NULL NULL NULL yes 500 NULL 120 NULL NULL 0 NULL 0 NULL
2 2122498618 from-trunk allowed_not_screened NULL NULL lmce NULL NULL udp,tcp dynamic never friend NULL NULL NULL 2122498618 NULL NULL spa3102 dynamic port,invite NULL NULL NULL yes NULL NULL NULL NULL NULL alaw;ulaw NULL NULL 5061 spa3102 NULL no NULL NULL NULL NULL NULL NULL NULL yes yes yes no NULL no NULL yes accept 1800 90 uas NULL NULL NULL yes 500 NULL 120 NULL NULL 0 NULL 0 NULL


Then i changed the protocol to SIP, and the asterisk log shows:

Code Select Expand

[Sep 12 21:06:36] ERROR[23452]: netsock2.c:263 ast_sockaddr_resolve: getaddrinfo("dynamic", "(null)", ...): No address associated with hostname
[Sep 12 21:06:36] WARNING[23452]: acl.c:582 resolve_first: Unable to lookup 'dynamic'
[Sep 12 21:06:36] WARNING[23452]: acl.c:711 ast_ouraddrfor: Cannot connect
[Sep 12 21:06:36] ERROR[23452]: chan_sip.c:3808 __sip_reliable_xmit: Serious Network Trouble; __sip_xmit returns error for pkt data
[Sep 12 21:06:36] NOTICE[23452]: chan_sip.c:13135 sip_reg_timeout:    -- Registration for 'spa3102@dynamic' timed out, trying again (Attempt #7)


So, it did not work either.

Anyone do have the spa3102 working with lmce 1004?

Another question, regarding the dial rules, outbound, trunk sequences, registration string, etc: is there a way to define the dial rules? trunk sequence? registration string?

Thx in advance!

Paulo

Name                  spa3102   
Enabled                  yes (marked)
Incoming FAX line    no (not marked)   
Prefix                  9
Username *          3121020606             The username to access provider's service (not webpage), sometimes is the phone number
Password *          lmce                   The password to access provider's service (not webpage)
Phone number *      3121020606   The phone number assigned tAs o you by provider
Host *             dynamic    The host to register your asterisk with provider
Protocol *                SPA


Username and phone number have to be the same.

Telasip

http://telasip.com/voip-asterisk-howto.html

This is the output from lsusb for mine.

Bus 001 Device 009: ID 040b:7001 Weltrend Semiconductor

Do you get the same thing?

I do not know if the buttons were working or not.

I get the same output as you... but then I get that even without editing the the template. Also the transport buttons beneath the VFD work without editing the template.

So can you describe what you see in the VFD once you have edited the name of the template?

Andrew

Ok I checked and the buttons work when the display is not working.

Go on webadmin to Advanced > Configuration > Devices then select Media Live LCD/Buttons then select View Device Template Media Live LCD/Buttons #1860 and change description to Media Live LCDButtons. Now do quick reload router and the VFD should start working.

The VFD is displaying the Date and Time when idle.
When playing music it shows Arstist - Title & elasped time.

This is the output from lsusb for mine.

Bus 001 Device 009: ID 040b:7001 Weltrend Semiconductor

Do you get the same thing?

I do not know if the buttons were working or not.

Can someone try this and let me know if it works for them. I got the VFD working on the MSI Media Live working by changing the template name from Media Live LCD/Buttons to Media Live LCDButtons. Before I made the change is was not loading the plugin.

OK it looks good now. Was able to play using vlc on xp.

Ok I found the problem in exportPlaylist.php on line 134 PlaylistEntry.FK_Playlist is hard coded to playlist 4.

fixed the include on the language file


Couldn't find why you were getting the error message. This error message is flagged when no results are returned from the SQL query. Make sure that the /operations/mediaBrowser/playlists.php and operations/mediaBrowser/editPlaylist.php files have been copied over. Also, if you get the error message again, look at the address bar in the popup window and paste it here.. It should be something like index.php?section=exportPlaylist&playlistID=# where # is the ID of the playlist.

Before clicking export

http://dcerouter/pluto-admin/index.php?section=exportPlaylist&playlistID=1

After clicking export

http://dcerouter/pluto-admin/index.php?section=exportPlaylist&msg=The+exported+playlist+would+be+empty.+Please+check+your+settings+and+the+playlist%2C+and+try+again&exportType=extm3u&exportFileTypes=music&playlistID=1

And I am trying to export playlist 1

I have 461 files in the play list and this is what I get.

The exported playlist would be empty. Please check your settings and the playlist, and try again

Also in editPlaylist.php on line 5 missing leading "/" on the lang file.