Messages

1

Installation issues / Re: WinTV-PVR 500 MCE Kit

« on: January 12, 2008, 01:04:59 pm »

Mitsus,

I've tried adding my MCE remote the way you discribed and still cannot get past the ./configure. it errors out near the end, and wont let me make or make install

Any other ideas?

thanks,

Mike

Is lirc package that report errors into configure phase?

Can you past your errors?

2

Installation issues / Windows CE PDA Orbiter installation

« on: November 08, 2007, 12:58:49 pm »

Hi,
iwould want to install Puto Orbiter for Windows CE PDA. I don't find nothing into Wiki about this.
I've connect my PDA with Blutooth to my Kubuntu workstation and i've tried to upload some files (Orbiter.CAB, Orbiter_CE.exe, ecc) into my PDA using wrongly the command line:

#/usr/pluto/bin/SmartphoneInstall.sh 00:12:37:3C:77:21 OrbiterCE_SDL.exe

I'm able to trannsfer these files into my PDA, and i'm able to install them, but when i try to lauch application i see only black screen and it lock the keys.

I've added into linuxMCE admin interface this type of orbiter. See below the screenshot



Can someone help me please?

Thank a lot.

3

Installation issues / Re: WinTV-PVR 500 MCE Kit

« on: November 08, 2007, 11:31:58 am »

Hi leonja,
i see on http://www.hauppauge.com/pages/products/data_pvr150mcekit.html that your Transmitter is similar to mine. Your IR Transmitter is supported with driver module lirc_mceusb2 version.
Follow my instruction ad i think that it will work fine.
Post the status of your work.
If you don't trust my words on the current post i attach here the screenshot of my steps and my tests.

Ciao

4

Installation issues / Re: WinTV-PVR 500 MCE Kit

« on: November 07, 2007, 05:40:43 pm »

OK. Thank a lot for support.
I've solved.
Below my steps.

Code: [Select]


cd /usr/src
wget http://lirc.sourceforge.net/software/snapshots/lirc-0.8.2pre2.tar.bz2
bunzip lirc-0.8.2pre2.tar.bz2
tar -xvf lirc-0.8.2pre2.tar
cd lirc-0.8.2pre2

./configure --prefix=/usr --sysconfdir=/etc/conf.d --with-x --with-driver=mceusb2
make
make install
cp remotes/mceusb/lircd.conf.mceusb /etc/conf.d/lircd.conf

# modprobe lirc_mceusb2

Start lircd
# lircd

# irw
000000037ff07bfe 00 One mceusb
000000037ff07bfd 00 Two mceusb
000000037ff07bfd 01 Two mceusb
000000037ff07bf2 00 Home mceusb
000000037ff07bf2 01 Home mceusb

Bye

5

Installation issues / WinTV-PVR 500 MCE Kit

« on: November 07, 2007, 03:08:25 pm »

Hi boys,
i've currently installed a Hauppauge WinTV-PVR 500 MCE Kit on my Linux MCE. I've problem to install     Infrared Receiver. On Linux MCE Admin web page i've selected Devices->Media directors->Infrared remote controls you will use: Windows XP MC Remote and on the section     Infrared Receivers: mce_usb2, bur when i reload router on screen i see that there are problems on a pheripheral     Infrared Receivers.
Below the screenshot oh the LinuxMCE Admin web site MediaDirectors section.


There is another procedure to install this Infrared Receiver?

Please help me!!

Thank a lot

6

Users / Windows Mobile 2005 SmathPhone problem

« on: November 05, 2007, 06:24:17 pm »

Hi,
i've install Orbiter.CAB on Samsung i600 with Windows Mobile 2005 for smathphone. I'm able to install it on my phone, but when i launh the "pluto application" i see only a black screen and my phone dead.
Only Nokia 770 is supported about smathphone? Are my installation steps ok?

Thank a lot.

7

Users / VoIp rpoble using another provider

« on: October 30, 2007, 12:16:11 pm »

Hi all,
i've a problem when i try to do and receive a call via an external sip provider NOVERCA.
I'm able to send a call to Linux MCE softPhone (it ringing), but i the RTP flow don't work.
Below i post my asterisk log

Code: [Select]

<-- SIP read from 192.168.80.1:5061:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 192.168.80.1:5060;branch=z9hG4bK37743f71;rport=5060
From: "0039066114" <sip:0039066114@192.168.80.1>;tag=as696bf54c
To: <sip:2222@192.168.80.1:5061>;tag=1954321300
Call-ID: 5f2980e529469ad30927cca1661ff15e@192.168.80.1
CSeq: 102 INVITE
Contact: <sip:2222@192.168.80.1:5061>
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, MESSAGE, INFO
Content-Type: application/sdp
Content-Length:   213

v=0
o=root 123456 654321 IN IP4 192.168.1.10
s=A conversation
c=IN IP4 192.168.1.10
t=0 0
m=audio 7078 RTP/AVP 0 8 101
b=AS:-1
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000

--- (10 headers 10 lines)---
Found RTP audio format 0
Found RTP audio format 8
Found RTP audio format 101
Peer audio RTP is at port 192.168.1.10:7078
Found description format PCMU
Found description format PCMA
Found description format telephone-event
Capabilities: us - 0x10c (ulaw|alaw|g729), peer - audio=0xc (ulaw|alaw)/video=0x0 (nothing), combined - 0xc (ulaw|alaw)
Non-codec capabilities: us - 0x1 (telephone-event), peer - 0x1 (telephone-event), combined - 0x1 (telephone-event)
list_route: hop: <sip:2222@192.168.80.1:5061>
set_destination: Parsing <sip:2222@192.168.80.1:5061> for address/port to send to
set_destination: set destination to 192.168.80.1, port 5061
Transmitting (NAT) to 192.168.80.1:5061:
ACK sip:2222@192.168.80.1:5061 SIP/2.0
Via: SIP/2.0/UDP 192.168.80.1:5060;branch=z9hG4bK2566d099;rport
From: "0039066114" <sip:0039066114@192.168.80.1>;tag=as696bf54c
To: <sip:2222@192.168.80.1:5061>;tag=1954321300
Contact: <sip:0039066114@192.168.80.1>
Call-ID: 5f2980e529469ad30927cca1661ff15e@192.168.80.1
CSeq: 102 ACK
User-Agent: Asterisk PBX
Max-Forwards: 70
Content-Length: 0


---
    -- SIP/2222-6cbd answered SIP/linux_mce1-c5d8
We're at 192.168.1.10 port 17796
Adding codec 0x4 (ulaw) to SDP
Adding codec 0x8 (alaw) to SDP
Adding codec 0x100 (g729) to SDP
Adding non-codec 0x1 (telephone-event) to SDP
Reliably Transmitting (NAT) to 213.217.147.203:5060:
SIP/2.0 200 OK
Via: SIP/2.0/UDP 213.217.147.203:5060;branch=z9hG4bKa6d43d11db3e00edec5f0f29;received=213.217.147.203;rport=5060
Via: SIP/2.0/UDP  213.217.147.248:5060;branch=z9hG4bKE326F3
Record-Route: <sip:213.217.147.203;lr>
From: <sip:0039066114@213.217.147.248>;tag=3DCD25E0-23AF
To: <sip:00390661244130@213.217.147.203>;tag=as51aff481
Call-ID: 6F5DEE67-67A011D5-834DB747-8AF6A98@213.217.147.248
CSeq: 101 INVITE
User-Agent: Asterisk PBX
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY
Contact: <sip:2222@192.168.1.10>
Content-Type: application/sdp
Content-Length: 285

v=0
o=root 7297 7298 IN IP4 192.168.1.10
s=session
c=IN IP4 192.168.1.10
t=0 0
m=audio 17796 RTP/AVP 0 8 18 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -

--- (8 headers 0 lines)---
dcerouter*CLI>
<-- SIP read from 192.168.80.1:5061:
SIP/2.0 481 Subcription Does Not Exist
Via: SIP/2.0/UDP 192.168.80.1:5060;branch=z9hG4bK6e0a61cf;rport=5060
From: "asterisk" <sip:asterisk@192.168.80.1>;tag=as55eec798
To: <sip:2222@192.168.80.1:5061>;tag=2040230086
Call-ID: 067874834dc3ee461571a4be3daedf7f@192.168.80.1
CSeq: 102 NOTIFY
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, MESSAGE, INFO
Content-Length: 0


--- (8 headers 0 lines)---
    -- Got SIP response 481 "Subcription Does Not Exist" back from 192.168.80.1
Destroying call '067874834dc3ee461571a4be3daedf7f@192.168.80.1'
Destroying call '6101a3cc58f8e4ba52dc48de6b06e759@192.168.80.1'
Destroying call '1348218129@192.168.80.1'

Tell me if i must post others information, about for example my sip configuration files.

Thank you

8

Installation issues / Re: Blank Screen after LinuxMCE installed Nvidia drivers.

« on: October 24, 2007, 09:32:22 pm »

I've an NVIDIA Quadro FX 3450/4000 SDI. I've solved the problem of black screen after NVIDIA drivers installation after Linux MCE installation.

There are my steps:

1. Install Ubuntu with basic graphic support.
2. Install NVIDIA drivers (I use Version: 100.14.11 because Version: 100.14.19 don't work well)
See below how.
Exit from X.

sudo apt-get install build-essential
sudo apt-get install linux-headers-$(uname -r)
sudo apt-get install xserver-xorg-dev
sudo apt-get remove --purge nvidia-glx

then

sudo sh ./NVIDIA-Linux-x86-100.14.11-pkg1.run

[/i]

Reboot

If after reboot X server don't start, type CTRL+ALT+F1 and edit /etc/X11/xorg.conf.
And change these lines

In the Section “Device”:

[..]
Driver “nvidia”
[…]

In the Section “Screen”:

[..]
DefaultDepth 24
Option “SLI” “on”
Option “RenderAccel” “True”
Option “AllowGLXWithComposite” “True”
Option “AddARGBGLXVisuals” “True”
SubSection “Display”
[…]

at the end of file, create a new Section”Extensions” così:

Section “Extensions”
Option “Composite” “Enable”
EndSection

Write and exit

Well, now type #startx at prompt.

Your Nviadia cord now work fine.

3. Install Linux MCE with U2 Tranparency

9

Installation issues / Keyboard/Mouse don't work

« on: October 24, 2007, 06:44:11 pm »

Hi all,
After an installation of Linux MCE with DHCP server "ON", when i lauch it, keyboard and mouse don't work, in sense that i don't able to click nothing on graphical interface, but i'm able to use its on Kubuntu system and i use well Linux MCE HTTP Admin interface.

This problem is on when i've reinstall Linux MCE using DHCP server build in. While on past installation without dhcp server all work fine!

Someone can halp me to solve this problem?

10

Users / Pan/Tilt/Zoom setting for Panasonic IP camera

« on: October 23, 2007, 11:13:56 am »

Hi all,
i've a strange problem when i try to use a panasonic ip camera with Pan/Tilt function (bl-c 131 is the model). Well i'm able to configure it basically. See first snapshot.. Next i clik on "View" button and go to this page . Here, i'm able to see "Commands" with "Pan/Tilt/Zoom" infos. I edit it and insert into the text boxes the url of my pan/Tilt command API. Well. I'm able to see image from camera with linux MCE but Pan/Tilt command don't works.

Thank a lot

11

Users / Re: AMD64, MCE, and you

« on: October 19, 2007, 08:42:32 pm »

No for now!
Sorry

12

Installation issues / Re: NVIDIA cards question

« on: October 18, 2007, 04:39:28 pm »

Excuse me Zaerc.
Can you be more specific about "That usually means that the wrong video output is selected"?

Thank you

13

Installation issues / Re: NVIDIA cards question

« on: October 18, 2007, 03:16:58 pm »

OK Hagen.

I explain all with some points:

1. I've install nvidia drivers from Linux MCE installer wizard. Its don't work...when i reboot kubuntu i see a black screen. I push CTRL+ALT+F1 and check the /etc/X11/xorg.conf. It is totally wrong!! I don't see nothing about my nvidia card.

2. I've reinstall Kubuntu and i've follow http://wiki.linuxmce.com/index.php/Display_Drivers#NVidia_Chipsets instructions, but i've the same error posted to dot 1.

3. I've reinstall totally Kubuntu and i follow the steps report from http://ubuntuforums.org/showthread.php?t=514161. It don't work, i've changes xorg.conf in according with this user, but i don't able to load X server.

4. Now i've reinstall Kubuntu and i want follow the instructions posted from http://edutechwiki.unige.ch/en/Ubuntu_installation. I post my result in 1 hour.

Can you support me Hagen?

Thank a lot and sorry for my bad english.

14

Installation issues / NVIDIA cards question

« on: October 18, 2007, 01:04:12 pm »

HI all,
is there someone that is able to fix the NVIDIA cards problems?
I see many questions from many users, but i don't understand if all NVIDIA cards are ables to run LinuxMCE with UI2 !!
I've a NVIDIA Quadro FX 3450/4000 SDI graphic card. I've try http://wiki.linuxmce.org/index.php/Display_Drivers but it don't work!! Never! I try other steps to install NVIDIA drivers and i post all my tests in this forum!
I want to solve these question because it is primary for me. I don't want UI1 interface, but UI2. I've buy an NVIDIA cards because LinuxMCE documentation wrote << Unfortunately very few video card manufacturers have the necessary composite extensions in their Linux drivers. At this moment the only video hardware we have confirmed UI2 works with are the nVidia 6xxx and 7xxx series; preferably a 7xxx with at least 128MB RAM.>>

I update my experience.

Thank a lot