Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Chymmylt

Pages: [1]
1
Well that worked thanks Thom - now I just gotta figure out where they came from (as I said - closed network and I know those files weren't on any other computer on the network) and how to keep them from comming back again :)

Thanks again Thom!

2
Can you go to "Files & Media" > "Media Files Sync", and go through the directory tree on the left to see what different directories all these copies are in?  And maybe copy/paste the names of the directories below data/videos in here. 

Ok - home on lunch - the directory tree looks like:
> home
    > public
        [ data ]
            > audio
            > documents
            > other
            > pictures
            > samples
            > tts
            > videos

In the video directory I have the following files on disk listed:

 tv_shows_0 
 
 tv_shows_1 
 
 tv_shows_62 

However, I'm not finding any of these files listed anywhere in here?


I also out of curiosity checked to see if it was in /mnt/upnp and I don't seem to have upnp in my /mnt directory?  This keeps getting weirder and weirder :S

3
Are you sure the neighbour isn't piggybacking your WLan  ;)

They might be but they would have had to crack the WAP encryption on my network and considering that the network hasn't been online for the extent of time with somebody trying to crack it for that duration - I suspect it's unlikely! ;)

4
Can you go to "Files & Media" > "Media Files Sync", and go through the directory tree on the left to see what different directories all these copies are in?  And maybe copy/paste the names of the directories below data/videos in here. 

I'll do that when i get home from work :)

5
more than likely, it's caused by an open access point, which is exposing a UPnP socket...this is what I experienced when I temporarily opened my firewall for some outside testing of the orbiter software overnight...Other UPnP systems see it, and LinuxMCE goes.. OH, hey, let's import that media....

I had to go in with mysql and delete the offending entries with a DELETE query on the media table with any Path that had /mnt/upnp in it.

so the moral is, please make sure if you expose ports, to close them when you're done.

-Thom
 

That would make sense except a) I am on an internal network with this setup so no outside access b) none of the computers on the network have upnp enabled and c) none of the computers on this network have these files on them!  I could see how I can get the extra populated files from UPNP but I still don't know where the files are comming from to begin with :S

6
I have seen those duplicates as well on some ocasions, I thought it was NAS related but I never got to the bottom of it as I'm just messing with to many things at once.

As for the flickering screen every ~30 seconds that should be solvable by properly configuring the display drivers, see Display_Drivers in the wiki for more information.

Ok - I'll give this a shot next - I left it running all night (just incase I wasn't running it long enough) and I still didn't get any further - I get as far as the point it loads Log Daemon [OK] - and doesn't get past that.  Just flickering display.

Thanks!

7
This was on an HP laptop - Dual Core (1.8g each) - 2 gig ram - geforce 7400 go vid card.  I'll give it another shot and leave it going over night - hopefully that works! :)  The other box I tried it on was an HP with a Dual Core athlon - don't happen to remember the speed but it's much newer then the laptop so it should have speed.  However, after about 30sec-1 min - it gets right past the startup dhcp script thing and reboots - can't get it any further then that - not sure what the issue is.  Thanks for the tip though - will give her overnight this time! :)

Chy

8
Installation issues / Re: Live TV
« on: September 27, 2007, 10:40:56 am »
I think that there was a server problem or something - finally after like 24 - 48 hours it downloaded the updates and let me update to the "beta" version of the newer software which supports schedule direct.  Even when I tried running MythTV Setup previously it was still complaining about card in use but now that seems to be working - now I just gotta hammer out all the other problems I'm having :)  But at least I can watch and record TV now!!! :)  Thanks for your suggestion though!

9
Ok - I have an install which is getting close to what I would consider functional (I finally have it recording TV and I can watch it too :)  However, when I go to Media -> Videos there are a whole bunch of entries for videos that I don't have on any computer in the house and that I never recorded (not to mention never would - even weirder is they are duplicated like a bunch of times - so basically when I select it I have the following as options to watch

First Business:.mpg
First Business:.mpg
First Business:.mpg
First Business:.mpg
First Business:.mpg
First Business:.mpg
First Business:.mpg
First Business:.mpg
First Business:.mpg
First Business:.mpg
First Business:.mpg
First Business:.mpg
First Business:.mpg
General Hospital:.mpg
General Hospital:.mpg
General Hospital:.mpg
General Hospital:.mpg
General Hospital:.mpg
General Hospital:.mpg
General Hospital:.mpg
General Hospital:.mpg
General Hospital:.mpg
General Hospital:.mpg
General Hospital:.mpg
General Hospital:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Oprah Winfrey:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Paid Programming:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg
Sign Off:.mpg

etc - it's very weird and they don't want to delete - any idea what's going on here?

Other issues I seem to be having which are as follows (incase you have quick types on them)
Linuxmce box doesn't appear as a network share (and when I try to connect by \\IPADRESS it wont accept my un/pw)
Network booting doesn't work with any of my other machines (one of them gets a perminate ip assigned and reboots - wont get further) and the other goes a log further and gets stuck with at a screen right after it finish running some batch (I don't remember off the top of my head - the computer has gone a long way through the process though and it feels like it should be at the point it's working - but it's hanging there with a ton of network activity (but it's been like 30 minutes at this screen) and it just stays there and the screen flickers for a second every 30 seconds or so - I'm guessing it has something to do with problems starting x or something but haven't the time to really inverstigate further).

Anyways, thanks for any help!

Chy


10
Installation issues / Live TV
« on: September 24, 2007, 12:51:46 am »
I've finally got it installed and up and running on my system - it detects all 3 of my cards no problem.  However, I can't get it to update for Schedules Direct (so I can't select a provider).  It also seems to be unable to resolve the deb.linuxmce.com (or is it org?  what ever is in the sources.list).  I've tried adding the IP address that was listed in the news for testers but all I got then was 404 errors when trying to update :(  I was hoping I could just start TV and setup a manual record (I wanna record the Simpsons tonight since I have to go out) so I click TV from the list - it loads MythTV but I keep getting a message that all my tuners are in use when I select TV :(  I fear I'm going to have to unearth my VCR :(  Any thoughts??? :)

Pages: [1]