LinuxMCE Forums
General => Installation issues => Topic started by: 1knight on February 05, 2008, 10:48:47 pm
-
Here are my Specs
M2N32-SLI Deluxe Motherboard
2 GB Ram DDR 800
Athlon X2 3800+
Geforce 7950 GX 2 (Two Video Connections are use 24" Vision Quest Monitor and my 50" Hitachi)
1 SATA 500 GB(Main Drive Windows XP MCE)
1 IDE 300 GB( using IDE TO SATA Converter )(Media Drive)
1 40 GB IDE(Linux Drive Ready for OS )
1 DVD Burner IDE
I am trying to use the DVD v7.10 to install to the 40 GB Drive.
The DVD Boots Gets to the 1st menu (with these Options Install do a Memory Check or Boot from the Hard Disk)
I tell it I want to install the software
It then Boots into Splash Screen
then on to the loading the OS Screen
that's where in Hangs
I am new to Lunix HELP PLEASE !!!
-
Here are my Specs
M2N32-SLI Deluxe Motherboard
2 GB Ram DDR 800
Athlon X2 3800+
Geforce 7950 GX 2 (Two Video Connections are use 24" Vision Quest Monitor and my 50" Hitachi)
1 SATA 500 GB(Main Drive Windows XP MCE)
1 IDE 300 GB( using IDE TO SATA Converter )(Media Drive)
1 40 GB IDE(Linux Drive Ready for OS )
1 DVD Burner IDE
I am trying to use the DVD v7.10 to install to the 40 GB Drive.
The DVD Boots Gets to the 1st menu (with these Options Install do a Memory Check or Boot from the Hard Disk)
I tell it I want to install the software
It then Boots into Splash Screen
then on to the loading the OS Screen
that's where in Hangs
I am new to Lunix HELP PLEASE !!!
At first boot, press function key for boot options, type acpi=off
-
Here are my Specs
M2N32-SLI Deluxe Motherboard
2 GB Ram DDR 800
Athlon X2 3800+
Geforce 7950 GX 2 (Two Video Connections are use 24" Vision Quest Monitor and my 50" Hitachi)
1 SATA 500 GB(Main Drive Windows XP MCE)
1 IDE 300 GB( using IDE TO SATA Converter )(Media Drive)
1 40 GB IDE(Linux Drive Ready for OS )
1 DVD Burner IDE
I am trying to use the DVD v7.10 to install to the 40 GB Drive.
The DVD Boots Gets to the 1st menu (with these Options Install do a Memory Check or Boot from the Hard Disk)
I tell it I want to install the software
It then Boots into Splash Screen
then on to the loading the OS Screen
that's where in Hangs
I am new to Lunix HELP PLEASE !!!
At first boot, press function key for boot options, type acpi=off
Don't work
Here is there Errors as Best as I coulld Write it down
117.280415 VFS :cannot Open Root Device "null" or Unknown Block(8,1)
117.280460 Please Append Correct "root" Option (here are Partitions Available) (no info Given)
117.280515 Kernel Panic-not syncing :vfs:Unable to Mount Root FS on Unknown-Block(8,1)
Hangs.
-
Help ???
-
does this sound like its failing to create the initial ramdisk to anyone else? this is purely guesswork on my part.
-
Mythdora v4.0 Will Install the video is just too big for my Monitors.
To Finish the Install.
Susa Dose install
-
I got Mythdora v4.0 But it won't boot up .. I want to run Linux MCE
where are the Linux Gurus
-
Here are my Specs
M2N32-SLI Deluxe Motherboard
2 GB Ram DDR 800
Athlon X2 3800+
Geforce 7950 GX 2 (Two Video Connections are use 24" Vision Quest Monitor and my 50" Hitachi)
1 SATA 500 GB(Main Drive Windows XP MCE)
1 IDE 300 GB( using IDE TO SATA Converter )(Media Drive)
1 40 GB IDE(Linux Drive Ready for OS )
1 DVD Burner IDE
I am trying to use the DVD v7.10 to install to the 40 GB Drive.
The DVD Boots Gets to the 1st menu (with these Options Install do a Memory Check or Boot from the Hard Disk)
I tell it I want to install the software
It then Boots into Splash Screen
then on to the loading the OS Screen
that's where in Hangs
I am new to Lunix HELP PLEASE !!!
At first boot, press function key for boot options, type acpi=off
Don't work
Here is there Errors as Best as I coulld Write it down
117.280415 VFS :cannot Open Root Device "null" or Unknown Block(8,1)
117.280460 Please Append Correct "root" Option (here are Partitions Available) (no info Given)
117.280515 Kernel Panic-not syncing :vfs:Unable to Mount Root FS on Unknown-Block(8,1)
Hangs.
Hmmm... this is might not be the answer but can i suggest that you re-burn the DVD using a slower write speed 2x or 4x and then see if the new DVD works correctly?
-
Here are my Specs
M2N32-SLI Deluxe Motherboard
2 GB Ram DDR 800
Athlon X2 3800+
Geforce 7950 GX 2 (Two Video Connections are use 24" Vision Quest Monitor and my 50" Hitachi)
1 SATA 500 GB(Main Drive Windows XP MCE)
1 IDE 300 GB( using IDE TO SATA Converter )(Media Drive)
1 40 GB IDE(Linux Drive Ready for OS )
1 DVD Burner IDE
I am trying to use the DVD v7.10 to install to the 40 GB Drive.
The DVD Boots Gets to the 1st menu (with these Options Install do a Memory Check or Boot from the Hard Disk)
I tell it I want to install the software
It then Boots into Splash Screen
then on to the loading the OS Screen
that's where in Hangs
I am new to Lunix HELP PLEASE !!!
At first boot, press function key for boot options, type acpi=off
Don't work
Here is there Errors as Best as I coulld Write it down
117.280415 VFS :cannot Open Root Device "null" or Unknown Block(8,1)
117.280460 Please Append Correct "root" Option (here are Partitions Available) (no info Given)
117.280515 Kernel Panic-not syncing :vfs:Unable to Mount Root FS on Unknown-Block(8,1)
Hangs.
Hmmm... this is might not be the answer but can i suggest that you re-burn the DVD using a slower write speed 2x or 4x and then see if the new DVD works correctly?
Okay But Slowest Speed my Burner can do is 6X will report back asap
-
sorry that did't work too
Guess I am stuck With Windows MCE 2005
-
try this.
first go to the ASUS site and make sure you have the latest BIOS, if not update. then
under the APM options in the BIOS, turn off the HPET.
Then upon install, press F6 to get the boot option line. In the options before the --
noacpi noapic nolapic acpi=off irqpoll
If all goes well and it installs then you must add that same line to /boot/grub/menu.lst
open a terminal and type
sudo gedit /boot/grub/menu.lst
Add the line above after the word splash in
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
then
sudo update-grub
then reboot
-
1knight:
i have a AMD64 as well, bad chaintech mobo...
i booted the DVD, pressed F6 & removed:
quiet splash --and then it booted just fine... a bunch of stuff flys past me on the screen but that really doesn't bother me... it works just fine...
i also tried all the apci switches & non of them worked...
hope that helps :)