LinuxMCE Forums
Archive => Archive => Pluto Main General Issues => Topic started by: archived on August 21, 2005, 11:02:12 pm
-
I'm running Pluto on a hybrid where initially there was only one network card.
Now I'm about to add a second network card, and since network configuration is stored into mysql and rewritten on every reboot I was expecting to find on Pluto Admin some page where I can add/modify what I need.
In the Advanced-> Network Settings page I can only find the current network configuration but there is no option to add/delete new interfaces.
There is an "Update" button but it seems to do nothing.
By reading on this forum I figured out a possible workaround, that consists in disabling the Network_Setup.sh script and modifying /etc/network/interfaces.
In this way changes are not overwritten and I can have the second network interface working.
Is this the proper procedure or am I missing something?
TIA
Marco
-
You can change the database manually for now and it will be forward compatibile.
To see the actual value, you can browse the "pluto_main" database with either the console tool mysql or a graphical tool like TOra under Linux and SQLyog (http://www.webyog.com/) on Windows. Run this SQL statement to see the current value: SELECT IK_DeviceData FROM Device_DeviceData WHERE FK_DeviceData=32;. You should get only one row that looks like this: eth0,10.0.0.89,255.255.255.0,10.0.0.1,10.0.0.150|eth0:0,192.168.80.1,255.255.255.0.
What you have to do is update that value by replacing "eth0:0" with "eth1".
This whole procedure is on my TODO list (combined with PPPoE), but I didn't get to it yet and I can't make any promises (sorry).
-
how do i connect the core to the internet if i have a pppoe connection?
-
Also on a similar issue.
Is it safe to remove the eth0:0 part if the pluto core is only going to have one card and is not the internet gateway?
-
how do i connect the core to the internet if i have a pppoe connection?
For now you have to do it manually:
Run "pppoeconf" and follow it's instructions, then change the database to the external interface is ppp0 instead of eth0.
-
You can change the database manually for now and it will be forward compatibile.
To see the actual value, you can browse the "pluto_main" database with either the console tool mysql or a graphical tool like TOra under Linux and SQLyog (http://www.webyog.com/) on Windows. Run this SQL statement to see the current value: SELECT IK_DeviceData FROM Device_DeviceData WHERE FK_DeviceData=32;. You should get only one row that looks like this: eth0,10.0.0.89,255.255.255.0,10.0.0.1,10.0.0.150|eth0:0,192.168.80.1,255.255.255.0.
What you have to do is update that value by replacing "eth0:0" with "eth1".
This whole procedure is on my TODO list (combined with PPPoE), but I didn't get to it yet and I can't make any promises (sorry).
Where can I find documentation on the meaning of the elements of this string? Could you explain in here? I suppose that one half configures the WAN card and the other configures the LAN card but there are too many IP addresses there.
-
Could you explain in here?
eth0,10.0.0.89,255.255.255.0,10.0.0.1,10.0.0.150
eth0 = interface ID
10.0.0.89 = Local IP or IP assigned to the local interface (static or assigned via DHCP).
255.255.255.0 = Subnet mask (you usually do not have to change this)
10.0.0.1 = Default Gateway IP (usually your router leading to internet in a home network)
10.0.0.150 = should be the broadcast IP.