LinuxMCE Forums

General => Installation issues => Topic started by: mardibloke on June 12, 2012, 02:46:56 pm

Title: Dianemo S - DHCP Server
Post by: mardibloke on June 12, 2012, 02:46:56 pm
Any known issues,  suggestions of things to check if DHCP clients on LAN side are not getting an IP address?

Was working fine, before changing LAN/WAN addressing on Core -  :-[

12.04 32bit, recent fresh install of Dianemo.

Devices with Fixed IP address on LAN side can Browse internet and dianemo admin pages
Firewall on Dianemo currently off
Can Browse internet and LAN devices from Core

See attachment for settings - have tried enable/disable/restarts of core.
Title: Re: Dianemo S - DHCP Server
Post by: totallymaxed on June 12, 2012, 03:58:58 pm
Any known issues,  suggestions of things to check if DHCP clients on LAN side are not getting an IP address?

Was working fine, before changing LAN/WAN addressing on Core -  :-[

12.04 32bit, recent fresh install of Dianemo.

Devices with Fixed IP address on LAN side can Browse internet and dianemo admin pages
Firewall on Dianemo currently off
Can Browse internet and LAN devices from Core

See attachment for settings - have tried enable/disable/restarts of core.

The problem was caused by the scripts that manage the LAN side IP setup not updating the Media Manager's IP address and this caused a cascading failure in other scripts. A temporary fix is to manually update the IP address of the Media Manager and then run diskless-setup again - we have done that for you via remote assistance so you should be all set now.

We will issue a fix for this so that this is handled automatically in the near future.

All the best


Andrew
Title: Re: Dianemo S - DHCP Server
Post by: mardibloke on June 12, 2012, 04:12:50 pm
Thanks Andrew - all working fine now.