LinuxMCE Forums
General => Installation issues => Topic started by: pigdog on April 25, 2012, 05:22:42 am
-
Downloaded the latest 10.04 .iso 1004-20120423001425928.iso
Did md5sum check on the .iso - matched.
Burnt an image at lowest speed (8x) with burnproof to reduce errors.
In the Bios set motherboard to boot from DVD drive.
Booted.
Received "ISOLINUX 3.63 Debian-2008-07-15 Copyright (C) 1994-2008 H. Peter Anvin boot:" message.
At this point you may press "Enter" or wait about a minute for the system to automatically boot into the LinuxMCE 10.04 Live CD GUI.
Using the arrow keys I selected "Install LinuxMCE Hybrid - Core + MD"
Received loading /casper/vmlinuz and /casper/initrd.gz......ready messages.
Received the LMCE Penguin logo and progress bar.
Progress bar stated a bit then received the following error messages.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Invalid argument
Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs
Rebooted.
Same error.
Burnt a second image at lowest speed (8x) with burnproof to reduce errors.
Same thing.
Here's my disk checksums. Same on both disks.
Before I go and swap out DVD burners, etc. are these correct?
The system I am using is presently running 2.0.0.45.11112425156 (Thu Nov 24 17:04:42 2011)
b00a44668ec0457229ba1be0818e2f7f ./preseed.cfg
f7eed3433a7d503032cdccd77b9ff3df ./.disk/info
728cb968a88534e0c50a9d99621f13eb ./.disk/cd_type
d41d8cd98f00b204e9800998ecf8427e ./.disk/base_installable
5a1150cc0785add4f08b5f31050557da ./.disk/release_notes_url
19c7226bd4367ff14cf7b2e3b0276e5e ./casper/filesystem.manifest-desktop
b00a44668ec0457229ba1be0818e2f7f ./casper/preseed.cfg
19c7226bd4367ff14cf7b2e3b0276e5e ./casper/filesystem.manifest
8a0136b44ce61ce07445c249e44ec64c ./casper/filesystem.squashfs
6b6fd69e765a0cf7cc373f3aa36fdb28 ./casper/filesystem.size
199cf0e7f5a3f2143d31219f9a06420c ./casper/initrd.gz
ccd2c22ced86af2d2915c1fe351795ca ./casper/vmlinuz
a6b665862784aad827e755e8835bec4b ./casper/README.diskdefines
7b33e6518129ec5825f8e0e881a704dc ./preseedco.cfg
018025cb39ff9a9b3d7f3129891bd21b ./install/messages.sh
b2f8b054b5c1f21e0625904c0fd78d16 ./install/postseedco.sh
ab02e2cb8cddcfba2af3b91044c5f4e5 ./install/postseed.sh
-
I got the same error message yesterday when I tried, I've been too busy since to retest but sounds like it might be issue with that build?
-
Mine's allmost done downloading.....
No pint in stopping it now.... will Install and provide feedback..
Karel
-
20120423001425928 had a problem due to wrong squashfs-tools (there are differences between 810 and 1004, and each build needs to install a different one).
LMCE-1004-20120423221925928.iso should work fine. Feedback appreciated.
-
Hi Posde,
LMCE-1004-20120423221925928 not uploaded to http://linuxmce.iptp.org/snapshots/ yet?
I dont see it there.
Karel
-
should be there in a few hours.
-
Hi,
560324550be22c71bc8a4b8cb845cd21 LMCE-1004-20120425171925932.iso
Is installing at the moment.
This issue is resolved with the above snapshot.
Thanks.
Cheers
-
Im still downloading LMCE-1004-20120425171925932.iso, at 66%. Let me know if yours installed completely.
Karel
-
Hi,
md5sum checked out, burned at lowest speed, setup AV Wiz as vga, 1024x768, 60 hz on hybrid.
Installed GREAT! l3mce - you da man! Very, very, nice UI.
In time, maybe tomorrow night, (this evening is play off -game 7- between Sens and Rangers), I'll fire up first MD - Revo 330.
DragonK hope yours went OK. So far mine is good. I have NAS to add yet, etc, etc. will keep advised if problems.
Cheers