LinuxMCE Forums
Archive => Archive => Asterisk => Topic started by: archived on November 22, 2006, 09:59:47 pm
-
I am going to buy a couple cisco 7960g for use with pluto. What protocol do i what loaded on the phone? sip, sccp,or mcgp
thanks
wes
-
I had 7960 work well in SIP mode.
Not always auto-discovered unless you add the MAC address range (see link below) but otherwise it works great.
If you opt for a 7970 instead (I would), then you need to use SCCP
http://www.stepanoff.org/wordpress/works/smart-home/howto/how-to-setup-cisco-7970/
Then you get a nice orbiter on your phone :-)
-
I had 7960 work well in SIP mode.
Not always auto-discovered unless you add the MAC address range (see link below) but otherwise it works great.
If you opt for a 7970 instead (I would), then you need to use SCCP
http://www.stepanoff.org/wordpress/works/smart-home/howto/how-to-setup-cisco-7970/
Then you get a nice orbiter on your phone :-)