LinuxMCE Forums
Archive => Archive => Pluto Main General Issues => Topic started by: archived on November 15, 2006, 10:29:39 pm
-
Since upgrading to .42 my dvb drivers are no longer loaded automatically i.e. /etc/init.d/dvb is not invoked.
When starting the drivers manually, everything seems fine however If I try to watch a channel as soon as I get signal lock the following error messages are displayed on screen.
Failed to Reinit Video
and
Error was encountered while displaying video
Upon checking the mythbackend.log I see the following errors
2006-11-15 20:56:00.663 MainServer::HandleAnnounce Playback
2006-11-15 20:56:00.674 adding: dcerouter as a client (events: 0)
2006-11-15 20:56:00.677 TVRec(5): Changing from None to WatchingLiveTV
2006-11-15 20:56:00.682 TVRec(5): HW Tuner: 5->5
New High level CI handler
Sending message=[9f 80 30 ]
Sending message=[9f 80 31 ]
Debug: 159 128 49 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
2006-11-15 20:56:05.119 DVBSignalMonitor(0)::constructor(5,Warning, can not measure Bit Error Rate): Operation not supported
2006-11-15 20:56:05.124 DVBSignalMonitor(0)::constructor(5,Warning, can not count Uncorrected Blocks): Operation not supported
2006-11-15 20:56:57.701 Expiring Robins of Eden from Wed Nov 15 20:50:00 2006, 14 MBytes, forced expire (LiveTV recording)
2006-11-15 20:56:57.710 Expiring from Wed Nov 15 20:52:47 2006, 95 MBytes, forced expire (LiveTV recording)
2006-11-15 20:58:07.797 TVRec(5): PauseRecorder() called with no recorder
2006-11-15 20:58:08.788 Finished recording Match of the Day Live: channel 7301
2006-11-15 20:58:08.815 Preview Error: Previewer file '/home/mythtv/shows/192.168.80.1/7301_20061115205605.mpg' is not valid.
2006-11-15 20:58:08.965 DVBSignalMonitor(0)::constructor(5,Warning, can not measure Bit Error Rate): Operation not supported
2006-11-15 20:58:08.969 DVBSignalMonitor(0)::constructor(5,Warning, can not count Uncorrected Blocks): Operation not supported
2006-11-15 20:58:10.709 Finished recording Robins of Eden: channel 7302
2006-11-15 20:58:10.777 Finished recording Robins of Eden: channel 7302
2006-11-15 20:58:10.827 Preview Error: Previewer file '/home/mythtv/shows/192.168.80.1/7302_20061115205808.mpg' is not valid.
2006-11-15 20:58:10.856 DVB#0 CA Error: CAM supports no CA systems! (Slot #0)
2006-11-15 20:58:10.920 DVB#0 CA Error: CAM supports no CA systems! (Slot #0)
2006-11-15 20:58:10.929 DVB#0 CA Error: CAM supports no CA systems! (Slot #0)
2006-11-15 20:58:10.932 DVB#0 CA Error: CAM supports no CA systems! (Slot #0)
2006-11-15 20:58:10.936 DVB#0 CA Error: CAM supports no CA systems! (Slot #0)
I deleted all cards and video sources etc, re-added dvb-s card, rescanned the transponder and still get the same errors. The channel is FTA so not sure why it is complaining about CA.
Using Twnhan DVB-S card.
Problem only encountered since the upgrade to ver .42.
Any help would be appreciated
Thanks
NOS
-
After much playing around I decided to revert to using VDR for my satellite viewing, however that is also broken so it looks like the .41 to .42 upgrade has caused some big problems with the dvb drivers.
I think I will download a ISO version of .42 and give that a try. Can I backup the media database and restore it without problems if I perform a fresh install ?
Having a look at the pluto packages I have also noticed that the pluto ivtv implementation is based upon version .60 of the ivtv drivers. Are there any plans to update these to the current .80 version as they have fixed a number of issues relating to capture cards and mythtv also make use of these improvements.
NOS.
-
Hi NOS,
Could you post somewhere, please, a brief instructions how to configutre VDR in the Pluto? Let's imaging that we have a core and one MD, where I'd like to watch TV.
Thanks in advance.
-
NOS,
Also getting similar problems to yours. Tried similar things to you with no success. I have two cards in the backend a DVB. The cards seem to setup as devices OK but trying to watch from an MD I also get the Failed to reinit Video message and have actually had it freeze up a couple of times.
Anyone actually got MythTV working in 0.42?
Darren
-
Darren,
Thanks for confirming the problem, I have mythtv working ok with an analogue card although mythtv loses focus so you have to keep pressing the mouse button to gain control after watching live tv and navigating some menus.
I have also noticed that pluto's implementation of ivtv drivers is outdated and the latest version of mythtv makes use of some of the later features.
What DVB cards are you using
Cheers
NOS
-
Hi,
Noticed the first message was missing a word or something when I re-read it.
Anyway, the backend has one DVB-T card which is a Winfast DTV1000 T.
It also has an Analogue card in it which is a Pixelview PlayTV Pro. I can't manage to see if the Analogue is working as I can't get the frontend to do much at all except report a failed to reinit video error.
Will try and play around a bit more when I get some time.
Regards
Darren
-
Darren just to let you know I have now raised a formal bug report using mantis
Issue number: 3062
@nite_man
I will try and write some instructions when I manage to get VDR working again.
Cheers
NOS