LinuxMCE Forums
General => Installation issues => Topic started by: Riggs on June 02, 2010, 12:55:49 am
-
I have a Dell XPS Gen5, 3.2Ghz CPU, 3GB Ram, 120GB SATA Pri, 1TB SATA SEC, GeForce 8600 1GB, Creative Surround Sound 5.1 USB, running through optic. WinTV HVR 1800 MCE
JVC LT42-EX17 42in HDMI 1080i TV.
Yamaha Natural Sound Receiver HTR-5930 5.1.
Time Warner Cable Kansas City, no Set-top Box just straight to the TV
I have tried to install LinuxMCE 8.10, 16 times in two days and I’m now staring at the AV wizard for the 17th time, I have to select DVI/HDMI 720p, even though my TV is 42in 1080i HDMI, anything I try just won’t work I get blank screen.
I cannot get audio at all, I have tried selecting optic and analog all though I did get audio once when I selected analog and yes I am using and optic connection to my AV receiver, I’m am not getting audio right now.
I’m now looking at the next wizard the one that says “if you can see and hear me, select the ‘next` button and press enter”
No I don’t see her and I don’t hear her, I have a black box where the video is supposed to be and the whole screen seems flash every so often.
Gonna wait 15 minutes and see what happens,
Any help would be excellent
-
Update to the above post.
OK still no Video or sound, so I will continue.
My TV card was not detected just a black box, there was no add-on software just a black box, my MCE remote did not work.
Selected “Start using system”
-
Update to ubove posts.
Reboot complete, I have LMCE on my screen with pics from flicker.
insert standed audio cd did not get any audio,
insert dvd it is detected but does not play returns to default screen.
Now i reinstall again.
Please help me out here i will do any leg work needed.
I'm a Linux noob
-
When you inserted the DVD did it say reading DVD or something before poping up something about dvdcss (sorry been a while since seen it so cannot remember the exact screens).
You will need to run:
sudo apt-get install libdvdcss2
to get DVD's to play.
Did the CD actually play? You could try copying over a mp3 to the system and checking to see if that works.
When you select UI settings in the initial wizard make sure you set it to UI1 and once everything is up and running properly you can re run wizard and try the other 2. This might fix your video in wizard problem.
Hopefully that might fix some of your issues.
-
Just burning a new dvd as i seen a new snapshot in the mirrors http://linuxmce.iptp.org/snapshots/ down at the bottom LinuxMCE-8.10-23002-i386.iso 01-Jun-2010 12:17 3.8G.
So i will give it a try, will update soon.
-
You should also read the following page:
http://wiki.linuxmce.org/index.php/AVWizard
There is a small addendum to that page:
You can also use the keys Q, W, and E, to use DVI 2, VGA 2, and Component 2, respectively. Your graphics card may be exposing your display in that manner.
-Thom
-
-
Got through the wizards, still did not see the video with Sara, I have no internet on my internal network all though I can ping Google.com.
I have installed libdvd, and DVDs still will not play I select play then the screen goes back to the default with Flickr.
-
When you say 'still did not see the video with Sara' do you see anything on the screen? I guess you must do if you get Flickr?
I suggest you post a diagram/schematic of your network to discuss further the internet on the internal network, also publish your ping times.
Also, if you are still having problems with sound I suggest you answer the following:
1. does the machine have two sound cards - on board then USB for instance
2. if you go to the terminal and run 'alsamixer' you can check if the digital channel is muted, mine was originally, it could be called PCM, S/PDIF, SPDIF or IEC958. Use this http://alsa.opensrc.org/index.php/Alsamixer (http://alsa.opensrc.org/index.php/Alsamixer) page to help you navigate.
-
Yes I do see the wizards on screen just no video or sound in the wizards.
My sound card is USB creative x-fi surround sound 5.1, model SB1090, alsamixer did not work, tried all options listed on the page you linked.
As for network-
time Warner cable connected to eth0 on lmce
from eth1 on lmce to port 1 on a Linksys wrt 54gl router.
from the Linksys I have 2 laptops and one picture frame on wifi
And 1 PC on Ethernet cable.
-
Ping from windows vista
ping Google.com
32bits
times. Ttl
39 254
38. 254
51. 254
41. 254
-
Does that PC have an nvidia graphics card?
I have seen similar issues with ATI video cards
HTH
Tim
-
As listed on the first post, geforce 8600 1gb
-
And I keep getting a detection "I detected a new plug and play device: DCS-5300(D-LINK / IP CAMERAS) should I use it" I have not got any of these devices, see my first post for my setup.
-
Say never use it, go to web admin, under Advanced/Configuration/Unknown Devices, look for the last device in the list, and not the mac address. Please post that in here, and maybe even check, what network device is using this.
-
This getting very annoying not having internet on my lan.
The web is too small on my Droid lol
-
And I keep getting a detection "I detected a new plug and play device: DCS-5300(D-LINK / IP CAMERAS) should I use it" I have not got any of these devices, see my first post for my setup.
I'm not terribly likely to be of any real help, here, but thought I'd mention that I've received this notification at somewhat random interval, since 0710, IIRC, or at least the earliest available builds of 0810... I'd always just assumed that someone else' IP-Cam had somehow found it's way onto my network, and edited my security accordingly (I'm paranoid - If I can't verify what / who a new device is, I'll not ignore until I've investigated). Guess I'll have to look deeper into it, the next time it appears.
If I may ask, did you happen to have any smartphones with cameras on the wifi net, when these notifications occurred? We've always got at least 2 around, and randomly on the wifi, so just wondering if that might have this sort of effect?
-
This getting very annoying not having internet on my lan.
The web is too small on my Droid lol
In times of this sort of trouble, I use wired tether to our G1's, on a netbook, for net...
-
I disconnected all PDAs and pocket PC's from the router, I just don't understand why lmce has full internet, yet the over computers on the land dont.
All I can do is ping sites, ie will say website fount waiting for reply and that's it.
-
you may want to try the following on your core:
/sbin/ifconfig eth0 mtu 9000
does that help?
-
Network:
Do you have DHCP turned on on the Linksys wrt54gl router? you should set it up like a switch, I did a Wiki page on how to do that if you don't know how: http://wiki.linuxmce.org/index.php/Linksys_WRT54G (http://wiki.linuxmce.org/index.php/Linksys_WRT54G)
I have this router model and it is working fine for me (when configured like the page).
Sound:
Are you saying you only have a USB sound card, there is no onboard sound?
Other:
I also get the "I detected a new plug and play device: DCS-5300(D-LINK / IP CAMERAS) should I use it" message, there are a couple of threads about what that could be but follow Posde's advice.
-
Only the USB card is connected, I took the sound audigy2 ZS out as it doesn't have optic only coaxial. I did configure the router like it said on the wiki, the mtu command came up with. "SIOCSIFMTU: Invalid argument"
-
As for the unknown device there is no records.
-
I now have sound and video DVDs play CDs play ;D
now I still got to get internet
-
OK my networking issue has got to be a problem with linuxmce, I took the router out of the equation and just did a crossover cable from the laptop to lmce and I got the same problem, windows says I have internet I can ping any address like Google, yahoo and get a reply, even Skype is on line I can't call out though.
If I try ie or Firefox, Google chrome, it will just say website found waiting for a reply.
I'm stuck
-
RIGGS!
damn it,
Do what I #(@$@ told you.
in a console:
sudo ifconfig eth0 mtu 9000
-Thom
-
Hey sorry Thom,
I typed in the command and I just get SIOCSIFMTU: invalid argument. If you could SSH in to my box you would see. I have reinstalled 22 times now and all that is left to fix is the internet trust my I p*$$ed off, but ill keep going.
-
paste the output of ifconfig. I suspect you are not following the FAQ.
-Thom
-
inet addr:192.168.80.1 Bcast:192.168.80.255 Mask:255.255.255.0
inet6 addr: fe80::960c:6dff:fef0:7822/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1566 errors:0 dropped:0 overruns:0 frame:0
TX packets:15479 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:265001 (265.0 KB) TX bytes:1157812 (1.1 MB)
Interrupt:16 Base address:0xcc00
Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10962 errors:0 dropped:0 overruns:0 frame:0
TX packets:10962 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2140676 (2.1 MB) TX bytes:2140676 (2.1 MB)
0 Link encap:Ethernet HWaddr f6:9f:31:9e:a5:d7
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
on@dcerouter:~$
-
dude... do you not realize that paste is useless, as it's missing the entire left column with the interface names?
-Thom
-
I'm using my moto Droid with connect bot so I can't seem to get it to past give me a min to work this out
-
just give me the interface names, on the left hand side, so I can match them up.
-Thom
-
UP BROADCAST RUNNING MULTICAST MTU:576 Metric:1 RX packets:76527 errors:372 dropped:0 overruns:0 frame:372
TX packets:15207 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:12934697 (12.9 MB) TX bytes:1247963 (1.2 MB)
Interrupt:17
th1 Link encap:Ethernet HWaddr 94:0c:6d:f0:78:22
inet addr:192.168.80.1 Bcast:192.168.80.255 Mask:255.255.255.0
inet6 addr: fe80::960c:6dff:fef0:7822/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1566 errors:0 dropped:0 overruns:0 frame:0
TX packets:15479 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:265001 (265.0 KB) TX bytes:1157812 (1.1 MB)
Interrupt:16 Base address:0xcc00
o Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10962 errors:0 dropped:0 overruns:0 frame:0
TX packets:10962 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2140676 (2.1 MB) TX bytes:2140676 (2.1 MB)
an0 Link encap:Ethernet HWaddr f6:9f:31:9e:a5:d7
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
imon@dcerouter:~$
-
Eth0
Eth1
Lo
-
you need to execute the command as:
sudo ifconfig eth0 mtu 576
the issue is that you're executing the command as a user, when you need root access.
$20,000 says the internet connection will work, the moment you execute the above command.
-Thom
-
No errors this time but still no internet
-
please read the FAQ in the wiki...
what is the ip address reported back when you do ifconfig eth0 ?
-Thom
-
76.92.235.11
-
Unfortunately, I can't help anymore at this point. Everything should be working.
If you run iptables -t nat -L
you'll see that the NAT rules are in place to forward packets from the internal interface to the external one.
There is a variable in your setup, that is not known to me.
I'm sorry.
-Thom
-
Long shot here but try disabling and then re-enabling the firewall in webadmin
then retest your internet connection.
HTH
Tim
-
Thanks your help, some how ill get it working then post a wiki
-
Turned of firewall and rebooting
-
Did not work
-
IA there any network gurus out there
-
There is something about your network that you aren't telling us. something you're doing. something being implicitly done...
This part of the system works perfectly when properly set up with compatible hardware.
-Thom
-
How is the best way for me to tell you how it is
-
Modem is time Warner cable, connected to on board eth0.
Eth1 is a pci, connected to port 1 on a Linksys wrt54gl running dd-wrt setup how it says on the wiki wan port is empty
-
did you turn off its DHCP on the LAN ports? you should probably set the router's wan port into static IP mode.
-Thom
-
the DHCP is turned off on the router, i have set the ip address as 192.168.80.130, i have left the wan port as dhcp and tried static, i have tried setting the router to router mode i basically looked though all the wikis and forums and tried everything. i even tried installing the stock linksys firmware, and tomato. I then you connected the laptop direct to eth1 in windows vista and ubuntu and it still didn't work
-
Should i just give up and install with only one ethernet card, if i did would i loose any functions
-
none of the network based pnp functions work with one network card. If you do, you'll also need to disable the dhcp server in the web admin.
-Thom
-
So stripped down to the min:
Cable modem --> eth0 - eth1 --> Vista or Ubuntu laptop
Gives:
1. No internet on laptop
2. Internet is OK on the core
3. you can ping externally and skype reports online
is that a fair assessment?
-
those symptoms literally say that the MTU is mismatched somehow.
-Thom
-
Ok so i need to get this working, is there any logs i can look through that might tell me what is going on.
I dont understand why i can ping out side and have windows tell me i have internet, if i open up a browser it will say website found waiting for a reply.
Its like there is something blocking it, i did check the firewall, im am now just running the install script for a fresh install it should be done in a few minutes if you want i can post the script out put, I did see some errors there
-
yes that is correct 100%
-
as soon as this install is done I will not touch anything untill you say if you want, or ill go through the wizard and then reply when done
-
the script is nearly done here is the outpu of ifconfig
eth0 Link encap:Ethernet HWaddr 00:12:3f:6b:9c:72
inet addr:76.92.235.11 Bcast:255.255.255.255 Mask:255.255.224.0
UP BROADCAST RUNNING MULTICAST MTU:576 Metric:1
RX packets:761627 errors:4968 dropped:0 overruns:0 frame:4968
TX packets:188633 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:222056457 (222.0 MB) TX bytes:13847553 (13.8 MB)
Interrupt:17
eth1 Link encap:Ethernet HWaddr 94:0c:6d:f0:78:22
inet addr:192.168.80.1 Bcast:192.168.80.255 Mask:255.255.255.0
inet6 addr: fe80::960c:6dff:fef0:7822/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:896 errors:0 dropped:0 overruns:0 frame:0
TX packets:26 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:294796 (294.7 KB) TX bytes:5466 (5.4 KB)
Interrupt:16 Base address:0xcc00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:670 errors:0 dropped:0 overruns:0 frame:0
TX packets:670 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:56331 (56.3 KB) TX bytes:56331 (56.3 KB)
-
the install script is finished i have saved the out put if you want to see it
-
sure.
-
its too big to attach
-
how about pasting it to pastebin.com ?
-Thom
-
let me know if this works http://pastebin.com/xTS6BjmV never used it
-
should i reboot and complete the wizards or wait
-
The install seemed to work correctly. Go ahead and reboot.
-Thom
-
OK BRB
-
At 70 percent of stage 1 in generating Orbiter. Network still has not internet, Skype is signed in I can even see who is online
-
are you using a crossover cable anywhere? if so, THROW IT AWAY.
-Thom
-
Riggs, paste an lspci as well, if you could.
This sounds similar to the symptoms I had with my Realtek r8168 NIC being incorrectly detected and driven by the r8169 drivers.
-
No all standard cat5 connected to the router
-
imon@dcerouter:~$ lspci0:00.0 Host bridge: Intel Corporation 82955X Memory Controller Hub
0:01.0 PCI bridge: Intel Corporation 82955X PCI Express Root Port
0:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
0:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 5 (rev 01)
0:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express Port 6 (rev 01)
0:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
0:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
0:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
0:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
0:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
0:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
0:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
0:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
0:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Controller (rev 01)
0:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
1:00.0 VGA compatible controller: nVidia Corporation GeForce 8600GT (rev a1)
3:00.0 Multimedia video controller: Conexant Systems, Inc. Device 8880 (rev 0f)
4:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
5:03.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
5:03.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
5:03.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
5:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
5:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
imon@dcerouter:~$
-
Sorry about the past missing info down the left it wont work right on the Droid, I wish I could use kde on mce but the Res sucks at 720 for some reason.
-
so to get internet on the latop I'm using Bitvise Tunnelier, to connect through ssh to LMCE and i have a socks proxy to IE so i will re paste LSPCI
-
Linux dcerouter 2.6.27-17-generic #1 SMP Fri Mar 12 03:09:00 UTC 2010 i686
The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.
To access official Ubuntu documentation, please visit:
http://help.ubuntu.com/
Last login: Thu Jun 3 14:37:20 2010 from 192.168.80.133
simon@dcerouter:~$ sudo lspci
[sudo] password for simon:
00:00.0 Host bridge: Intel Corporation 82955X Memory Controller Hub
00:01.0 PCI bridge: Intel Corporation 82955X PCI Express Root Port
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (r
ev 01)
00:1c.4 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express P
ort 5 (rev 01)
00:1c.5 PCI bridge: Intel Corporation 82801GR/GH/GHM (ICH7 Family) PCI Express P
ort 6 (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controll
er #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Control
ler (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bri
dge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (re
v 01)
00:1f.2 SATA controller: Intel Corporation 82801GR/GH (ICH7 Family) SATA AHCI Co
ntroller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 8600GT (rev a1)
03:00.0 Multimedia video controller: Conexant Systems, Inc. Device 8880 (rev 0f)
04:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethe
rnet PCI Express (rev 01)
05:03.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
05:03.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
05:03.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
05:04.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139
C+ (rev 10)
05:0a.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Cont
roller (PHY/Link)
simon@dceroute
-
so thats new any ideas why i can get internet by using a ssh tunnel for a proxy
-
Sorry not read all posts in detail but you replied to Thom - "No all standard cat5 connected to the router" but you had mentioned you were using one from core to laptop? No cross over should be needed in the setup.
Did you try core to laptop directly with standard network cable?
-
one minute let me check the cable i used
If i remember right the two computers wont connect if its not a cross over cable
-
ok no matter what cable i try, a direct connection from lappy to core i can only ping and not browse
-
all i remember about cross over cables was about 6 years ago when i had to make one to like to computers without a hub
-
Ok i took away all cables that say patched on them
-
I have been searching the web for ages now and i cant find a way to fix this problem
-
Is there any log files or tools i can use to diagnose the fault
-
what is the output of
sudo iptables -t nat -L
?
-Thom
-
ok no matter what cable i try, a direct connection from lappy to core i can only ping and not browse
Are you able to ping 8.8.8.8 from your laptop?
-
sudo iptables -t nat -L
Chain PREROUTING (policy ACCEPT)
target prot opt source destination
Chain POSTROUTING (policy ACCEPT)
target prot opt source destination
MASQUERADE all -- 192.168.80.0/24 !192.168.80.0/24
Chain OUTPUT (policy ACCEPT)
target prot opt source destination
And yes i can ping 8.8.8.8
-
If you can ping 8.8.8.8 from the laptop, check the DNS Server you have defined on your laptop.
-
its set through DHCP from the core it seems to resolve names ok as i can ping google.com or any address, I could set it to google dns and test i guess
-
Google DNS is just the same no change
-
This is so weird I have setup a gateway, even a PDC and a website server before using the same cables and router, I could use the server for the core but its a 1U half depth so it like a jet taking off.
If i could use the server as a core i could store it in the outside store room, but how would i get TV I cant put PCI in it, the HDHomerun wont work because Time Warner is still analog in Kansas.
-
TV Tuners can be placed anywhere in the house, MythTV will distribute them appropriately, so you can place them in a media director.
-Thom
-
So if i was to give on the Dell as a hybrid and use it as a MD then the Jet as the core outside, yes it would be very powerful but it will bug me why the Dell never made it and i would have net cables every where for the wife to moan about.
Just a though could it be one of the net-cards that are faulty in some weird way
-
OK your are not gonna be leave this i just logged into webadmin and clicked swap interfaces, the core rebooted i swapped the cable around now the internet works but its very slow.
-
here is my new ifconfig after swapping interfaces
eth0 Link encap:Ethernet HWaddr 00:12:3f:6b:9c:72
inet addr:192.168.80.1 Bcast:192.168.80.255 Mask:255.255.255.0
inet6 addr: fe80::212:3fff:fe6b:9c72/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1495 errors:0 dropped:0 overruns:0 frame:0
TX packets:4512 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:382132 (382.1 KB) TX bytes:1122876 (1.1 MB)
Interrupt:17
eth1 Link encap:Ethernet HWaddr 94:0c:6d:f0:78:22
inet addr:70.94.220.235 Bcast:255.255.255.255 Mask:255.255.224.0
UP BROADCAST RUNNING MULTICAST MTU:576 Metric:1
RX packets:55671 errors:0 dropped:0 overruns:0 frame:0
TX packets:25465 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:20186868 (20.1 MB) TX bytes:2008820 (2.0 MB)
Interrupt:16 Base address:0xcc00
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6889 errors:0 dropped:0 overruns:0 frame:0
TX packets:6889 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1649520 (1.6 MB) TX bytes:1649520 (1.6 MB)