two days ago i did a dvd install of kubuntu 810
run udate + upgrade per the sites instructions
downloaded the beta tar ranthe commands per the site instruction.
The install took a awhile but i didnt notice any error.
I can run the system just fine accually reallysmooth but...
I have a 500gb sata drive that has Linuxmce file structure + media on it
as well as a couple jump drives..
None of witch Linuxmce want to setup ---but--- kubuntu sees them
I fear something went wrong during the install. If I mount these threw Kunbunto
(Dolphin) i can access files ect but Linuxmce does not want to see or set them up
I have no unknown devices in Pluto admin...
fstab reads
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda1
UUID=d8510b58-b608-48e5-a507-b6c19bf25cd3 / ext3 relatime,errors=remount-ro,user_xattr 0 1
# /dev/sda5
UUID=54278047-d595-4f67-9585-6c1d082a8fba none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
mtab reads
rootfs / rootfs rw 0 0
none /sys sysfs rw,nosuid,nodev,noexec 0 0
none /proc proc rw,nosuid,nodev,noexec 0 0
udev /dev tmpfs rw,mode=755 0 0
fusectl /sys/fs/fuse/connections fusectl rw 0 0
/dev/disk/by-uuid/d8510b58-b608-48e5-a507-b6c19bf25cd3 / ext3 rw,relatime,errors=remount-ro,user_xattr,data=ordered 0 0
/dev/disk/by-uuid/d8510b58-b608-48e5-a507-b6c19bf25cd3 /dev/.static/dev ext3 ro,errors=remount-ro,user_xattr,data=ordered 0 0
tmpfs /lib/init/rw tmpfs rw,nosuid,mode=755 0 0
varrun /var/run tmpfs rw,nosuid,mode=755 0 0
varlock /var/lock tmpfs rw,nosuid,nodev,noexec 0 0
tmpfs /lib/modules/2.6.27-16-generic/volatile tmpfs rw,mode=755 0 0
tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0
devpts /dev/pts devpts rw,nosuid,noexec,gid=5,mode=620 0 0
securityfs /sys/kernel/security securityfs rw 0 0
nfsd /proc/fs/nfsd nfsd rw 0 0
automount(pid8070) /mnt/device autofs rw,fd=4,pgrp=8070,timeout=30,minproto=2,maxproto=4,indirect 0 0
i think its be mounted by something else but df-h reads
linuxmce@dcerouter:~$ df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 142G 9.2G 125G 7% /
udev 1012M 2.8M 1010M 1% /dev
/dev/disk/by-uuid/d8510b58-b608-48e5-a507-b6c19bf25cd3
142G 9.2G 125G 7% /
/dev/disk/by-uuid/d8510b58-b608-48e5-a507-b6c19bf25cd3
142G 9.2G 125G 7% /dev/.static/dev
tmpfs 1012M 0 1012M 0% /lib/init/rw
varrun 1012M 360K 1012M 1% /var/run
varlock 1012M 0 1012M 0% /var/lock
tmpfs 1012M 2.2M 1010M 1% /lib/modules/2.6.27-16-generic/volatile
tmpfs 1012M 0 1012M 0% /dev/shm
linuxmce@dcerouter:~$
any ideas would be helpfull
This same this happens to me i see an error during install but everything works nice.... i actually discovery media... but as soon at i createTBZ for diskless creation .... seems like the ability to discover is gone as well as my ability to play media on MD directly... which i think are inter related... something in the mount.nfs to automounter when screwy in install... still working on this...
-emac
started over...
Zotac 8100-ce matx mobo
2gb ram 1066
gf8600 pcie ( using hdtv componetn output )
160gb sata( os drive + some media )
Fugitu sata dvdrw
hitachi 500gb sata
DVD install beta2
(after Kubuntu + Linuxmce install had to run nvidia-config + add in
BusID "PCI:3:0:0" ( for my gf8600 )
Mode "800x600" "1024x768"
Before reboot or Linuxmce would not lauch X for its config
Setup went good ( Love the newer Icon sets for UI + UI2 aplha )
Linuxmce detects sad1 (160gb sata in witch my os is on )
but...
sdc1 500gb hitachi is not add threw linuxmce ( ext3 format ) note also had a 320gb seagate i pluged in either sata port 3 or 4 no go either fat32 or ntfs format -or- ext2 " was testing id 500gb was bad ect...
the 500 and 320gb are seen in Kubuntu and can be mounted and used as well as on my laptop via usb addapter...soo I know the physical drives are ok...
at the moment I am running apt-get update + upgrade
i'll post if any fix cam about or more info