Print Page - Upgrade 2.0.0.40: cyclic restarting of Orbiter to the MD

Title: Upgrade 2.0.0.40: cyclic restarting of Orbiter to the MD
Post by: archived on August 16, 2006, 08:49:43 PM

Hi,

I added a new MD in my installation upgraded up 2.0.0.40 version. After booting the MD started restart Orbiter cyclically. I saw in the /home/diskless/<MD ID>/var/log/pluto many files SpawnDaemon_amixer_<some digits>.log:

Code Select

Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 31
  Mono:
  Front Left: Playback 23 [74%] [on]
  Front Right: Playback 23 [74%] [on]

Can somebody give a right point to resolve this problem?

Thanks in advance.

Title: Upgrade 2.0.0.40: cyclic restarting of Orbiter to the MD
Post by: archived on August 19, 2006, 10:57:31 AM

I found in the MD onScreen Orbiter log those messages:

Code Select

10      08/19/06 17:28:56.850           Another device with IP REPLACE 192.168.80.2 connected as device: 212
== PromptUser( An Orbiter with the same device id was started on  192.168.80.2.
This Orbiter will be closed., 10, 0xb5af79b0 );

I suspect the problem related with this. Can somebody help me, please, resolve this?

P.S. I don't have two Orbiters connected to the one room (I check it on the pluto admin Orbiter page)

LinuxMCE Forums

Archive => Archive => Pluto Main Installation & IR codes => Topic started by: archived on August 16, 2006, 08:49:43 PM