During boot of my hybrid system, I get an error form informing me that a device did not start correctly. Where do I look to get detailed information for the error?
Thanks,
Cramer
you should see it trying to start whatevet device just before it gives that error, it will sit there and try for several seconds.
Hi,
Are you talking about the black screen with the white OK button saying something like some devices did not start correctly?
Yes, the black screen with the white button. It times out on that screen eventually but I don't see anything pausing prior to that screen being displayed.
Hi,
That screen can come up sometimes because you had a device, like bluetooth dongle, or something that isn't plugged into the system, turned on, connected etc.
Just wait for it to time out, hit the enter screen, whatever. It's not a critical thing.
Cheers.
If you have a genuine problem with a device not starting, you will be able to see which is failing in one of the log files. Perhaps /var/log/pluto/Spawn_Device.log or even combing through the DCERouter.log file.
Also, on that MD, in the web admin, look at the devices in the Devices Tree - every device you have that says it implements DCE and is not Disabled, should have the property "Registered". If a device isn't registered, then that is probably the device that failed to start. You can then look specifically at that device's log to see why it failed to start.