When I install 0810 according to step 1~5 (http://wiki.linuxmce.org/index.php/LinuxMCE-0810_alpha2), some packages were failed during download, is there a way to do compensation instead of re-install again? Such as following errors:
-----------------------------------------------------------------------------------------------------------------------------------------------------
#### Package pluto-orbiter failed (/tmp/tmp.kjMwK10754) - We wait 10sec and try again - to stop retrying press Ctrl-C.
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
pluto-orbiter: Depends: pluto-confirm-dependencies but it is not going to be installed
Depends: pluto-sdl-helpers but it is not going to be installed
Depends: pluto-x-scripts but it is not going to be installed
Depends: pluto-boot-scripts but it is not going to be installed
Depends: pluto-simplephone but it is not going to be installed
Depends: pluto-avwizard but it is not going to be installed
PreDepends: libhid0 but it is not installable
PreDepends: libsdl-gfx1.2-4 (>= 2.0.13) but it is not installable
PreDepends: libsdl-sge (>= 030809-1) but it is not installable
PreDepends: xine-ui but it is not installable
PreDepends: msttcorefonts but it is not going to be installed
PreDepends: discover but it is not installable
PreDepends: libsdl-gfx1.2-dev but it is not installable
PreDepends: abcde but it is not installable
PreDepends: xdialog but it is not installable
PreDepends: xloadimage but it is not installable
PreDepends: xcompmgr but it is not installable
PreDepends: xfwm4 but it is not installable
PreDepends: xfce4-mcs-manager but it is not installable
PreDepends: wmctrl but it is not installable
E: Broken packages
#### Package pluto-orbiter failed (/tmp/tmp.kjMwK10754) - We wait 10sec and try again - to stop retrying press Ctrl-C.
Hi flying.
You mentioned in an earlier post
QuoteLinuxMCE-0810 installation need huge downloading stuffs, almost spent more than 24 hours for me, is there have DVD or other installation packages available for installation shortcut?
Are you downloading via dial-up?
I am using broadband download from cn.archive.ubuntu.com, it's very slow, can I manually modify the sources.list point to archive.ubuntu.com instead of cn.archive.ubuntu.com?
Finally download was finished, unfortunately, the Orbiter cannot connect to DCERouter. I have istalled with the same configuration few days ago which works good(http://forum.linuxmce.org/index.php?topic=8459.0), I think there might have some changes happened. Details as following:
1. 2 NICs were installed
2. The output of ifconfig show:
eth0's IP is 192.168.2.3 //which got IP from my Router 192.168.2.3
eth1's IP is 123.129.254.12
But the contents in interfaces under /etc/network is following:
iface eth0 inet dhcp
iface eth1 inet static
192.168.80.1
Could someone help me figure out what's the problem? I really don't want to spend more than 20 hours to reinstall 0810:-(
Well that's definitely your problem! Very strange, they should be the same... your ifconfig should also say 192.168.80.1 for eth1
Have you any idea where the 123. address comes from? It seems to be a public address in China somewhere (Shadong province). Does that mean anything to you??
I did following change by deleting eth0 in netmask, the IP for eth1 changed to 192.168.80.1, but Orbiter still can not up.
File change:
-----------
iface eth0 inet dhcp
iface eth1 inet static
address 192.168.80.1
netmask 255.255.255.0 eth0 <-- Deleted eth0
Yes, I am in Shandong province now.
Seems the dcerouter IP still is 123.129.254.12 even the eth1's IP is 192.168.80.1
tracert 123.129.254.12
1 dcerouter.local (123.129.254.12) 0.056ms 0.024ms 0.023ms
Seems this IP was stored somewhere(DB?), do we have method to change it?
Quote from: flying on July 05, 2009, 05:02:41 AM
Yes, I am in Shandong province now.
Well it couldn't just know that or be a coincidence, it must be getting the address from your provider somehow! Is your network set up like this http://wiki.linuxmce.org/index.php/Network_Setup ? And your eth0 points outwards to the Internet and eth1 points inwards to your "internal" network? You are using an ADSL broadband modem in router mode not bridging, yes?
My configuration as following:
ISP Broadband Service (Internet) -----RJ45----- Net Gear Router ------RJ45----- eth0(192.168.2.3)
The eth1 did not connected to any cable, just left blank.
Same problem happened to following configuration too:
ISP Broadband Service (Internet) -----ADSL phone line----- Net Gear Router ------RJ45----- eth0(192.168.2.3)
The eth1 did not connected to any cable, just left blank.
Quote from: flying on July 05, 2009, 05:35:55 AM
Same problem happened to following configuration too:
ISP Broadband Service (Internet) -----ADSL phone line----- Net Gear Router ------RJ45----- eth0(192.168.2.3)
The eth1 did not connected to any cable, just left blank.
Check /etc/hosts and make sure it doesn't have an entry for this IP address, also check your routing table doesn't refer to that address or subnet. You can use pastebin.com to paste the output of route -n into and then paste that URL here. Do the same for the contents of your hosts file.
Quote from: flying on July 05, 2009, 05:35:55 AM
Same problem happened to following configuration too:
ISP Broadband Service (Internet) -----RJ45----- Net Gear Router ------RJ45----- eth0(192.168.2.5)
The eth1 did not connected to any cable, just left blank.
I am using above configuration in home, ADSL is in company, so I paste things here:
http://pastebin.com/f61ee7634
Seems there have routing to 123.xxx
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0
123.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 eth1
0.0.0.0 192.168.2.1 0.0.0.0 UG 100 0 0 eth0
My NetGear router information:
http://pastebin.com/f219a8474
I don't know what has happened to it. The route is there and normal because your interface has the 123 IP address. There is no point trying to change the route because it is simply reflecting the IP address. You need to get the IP address changed. Go to your LMCE web admin and go to the network settings, change that eth1 interface to 192.168.80.1
Once that interface reverts to the correct IP the correct route will be added and the incorrect route will be removed. Untill then you will not be able to connect to 192.168.80.1 as there is no valid route. If that doesn't work, I think something is really screwed up and you will have to reinstall.
I am trying reinstall now by connect my computer directly to broadband through PPPoE, but failed again when execute "./mce-install.sh" which complain no pluto_main DB. I retry again now.
One question:
Should I pick up
wget -c http://deb.linuxmce.org/ubuntu/new-installer-alpha2.tar.gz
or
wget -c http://deb.linuxmce.org/ubuntu/new-installer-alpha-latest.tar.gz according to(http://wiki.linuxmce.org/index.php/LinuxMCE-0810_alpha2)?
Hi,
Please get the latest tar file which is includes everything up to alpha 2.24.
Still can not success, complain mysql DB problems, pluto_main unknown, attached is the installation logs, frustrated:-(
Hi,
Your log cut off at
Setting up pluto-createdevice (2.0.0.44.0901260810) ...
Did you download the latest.tar.gz file?
I noticed this...
* Stopping MySQL database server mysqld [140G
[134G[ OK ]
and
Selecting previously deselected package pluto-sample-media.
(Reading database ... 90014 files and directories currently installed.)
where my install has ...
mysqld [157G & [151G
and 103126 files and directories for pluto-sample-media.
In fact, all my files and directories are larger.
Yes, I use the latest.tar.gz, still encounter problem, what should I do?
1. The first failure is:
* Starting DHCP server dhcpd3
* check syslog for diagnostics. [fail]
2.
Setting up pluto-media-database (2.0.0.44.0901260810) ...
Failed to connect to MySQL:Unknown database 'pluto_main'
Database host:localhost user:root pass: name:pluto_media port:3306
Users: 01 07/05/09 18:42:30.219 Connect failed Unknown database 'pluto_media' <0xb78a8b20>
01 07/05/09 18:42:31.655 Connect failed Unknown database 'pluto_security' <0xb7a55b20>
Connect failed Unknown database 'pluto_telecom' <0xb7888b20>
Connect failed Unknown database 'pluto_main' <0xb6c488d0>
Cannot connect to database! <0xb6c488d0>
Query failed (Table 'pluto_main.Device_DeviceData' doesn't exist): SELECT PK_File, Path, Filename, Missing, EK_Device, pluto_main.Device_DeviceData.IK_DeviceData FROM pluto_media.File LEFT JOIN pluto_main.Device_DeviceData ON pluto_main.Device_DeviceData.FK_Device = pluto_media.File.EK_Device AND FK_DeviceData = 195 WHERE pluto_media.File.Path LIKE '/%' OR pluto_media.File.Path = '' (1) <0xb6c488d0>
3. Then hang there with
Setting up pluto-createdevice (2.0.0.44.0901260810) ...
Even the file is there:
-rw-r--r-- 1 root root 360214 2009-01-26 22:43 pluto-createdevice_2.0.0.44.0901260810_i386.deb
Hi,
I guess we will have to go back and start at step 1.
When you downloaded the Kubuntu 8.10 i386 version desktop release did you do a md5sum?
(Did it match 82c02dc7386dfb6858a9ec09a5059e1e *kubuntu-8.10-desktop-i386.iso?)
I used a CD to install the Kubuntu0810, and I used this CD had been setup the 0810 in last week.
I killed this process and it will continue the install, don't know the result.
Setting up pluto-createdevice (2.0.0.44.0901260810)
Quote from: flying on July 04, 2009, 09:08:35 AM
When I install 0810 according to step 1~5 (http://wiki.linuxmce.org/index.php/LinuxMCE-0810_alpha2), some packages were failed during download, is there a way to do compensation instead of re-install again? Such as following errors:
-----------------------------------------------------------------------------------------------------------------------------------------------------
#### Package pluto-orbiter failed (/tmp/tmp.kjMwK10754) - We wait 10sec and try again - to stop retrying press Ctrl-C.
Reading package lists...
Building dependency tree...
Reading state information...
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
Since you only requested a single operation it is extremely likely that
the package is simply not installable and a bug report against
that package should be filed.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
pluto-orbiter: Depends: pluto-confirm-dependencies but it is not going to be installed
Depends: pluto-sdl-helpers but it is not going to be installed
Depends: pluto-x-scripts but it is not going to be installed
Depends: pluto-boot-scripts but it is not going to be installed
Depends: pluto-simplephone but it is not going to be installed
Depends: pluto-avwizard but it is not going to be installed
PreDepends: libhid0 but it is not installable
PreDepends: libsdl-gfx1.2-4 (>= 2.0.13) but it is not installable
PreDepends: libsdl-sge (>= 030809-1) but it is not installable
PreDepends: xine-ui but it is not installable
PreDepends: msttcorefonts but it is not going to be installed
PreDepends: discover but it is not installable
PreDepends: libsdl-gfx1.2-dev but it is not installable
PreDepends: abcde but it is not installable
PreDepends: xdialog but it is not installable
PreDepends: xloadimage but it is not installable
PreDepends: xcompmgr but it is not installable
PreDepends: xfwm4 but it is not installable
PreDepends: xfce4-mcs-manager but it is not installable
PreDepends: wmctrl but it is not installable
E: Broken packages
#### Package pluto-orbiter failed (/tmp/tmp.kjMwK10754) - We wait 10sec and try again - to stop retrying press Ctrl-C.
I was getting the same message after 8 installation attempts and I doubt that this was the issue, but i tried swapping the ethernet cables between the onboard and pci ports and said a few Our fathers, sacrificed 3 goats and a 6 pack of guiness(ok 5, i drank 1), went to church and it finally completed the installation. Of course another issue followed and i had to "solve" the blank screen issues by booting into recovery mode and changing video settings. Now i have issues with my MD, after wizard setup it gets to a point of saying
Reloading /etc/samba/smb.conf smbd only...done
ubuntu 8.10 moon tty1
moon59 login:
All of the same hardware which worked fine without a hitch in 7.10 is giving problems.....strange.