Alright so I was finally kind of successful getting a device to work with LMCE, my camera works, but it drops out and loses the connection after about 2 minutes of viewing. Is there some explanation for why this is happening? I can view it a long a I want going directly to its web interface but for some reason LMCE says "Connection lost to camera".
I set the camera up by adding a motion wrapper to my hybrid then adding a generic analog camera to the motion wrapper. Please any advice would be greatly appreciated, I've checked everything I can think of so I'm hoping it is some silly setting I've missed. :)
RESOLVED: I had to set the camera's resolution to 640x480, the default setting was causing the camera to lock up constantly.
I also wrote up a Wiki page on setting the up the DCS-920 located here:http://wiki.linuxmce.org/index.php/D-Link_DCS-920 (http://wiki.linuxmce.org/index.php/D-Link_DCS-920)
Now back to this pesky alarm panel...
I've been trying to get a DCS-20 setup and configured. I've created the Motion Wrapper and the Generic Camera, however I get no picture at all. I've tried to go to your wiki writeup but it's not displayed. Any help you can provide would be greatly appreciated.
Disregard my last post, you are the bomb. It works thanks a million.