Hi devs,
while trying do dig deeper into the LMCE mysteries I wanted to create plug-and-play templates for some of my devices. One of them is a Pinnacle PCTV 310i DVB-T capture card. It is working great (VDR) for me but it took me some steps to configure it manually (downloading firmware etc.).
I already got a template that detects the card and creates the device (see screenshot below). Even the pop-up asking to configure the card for mythtv is shown :) However, as said before, some manual tweaking was necessary, i.e. I had to download firmware. I used a GPLed script called get_dvb_firmware which is floating around on the internet. Unfortunately I could not find a kubuntu package containing the script. I'm a little stuck now... I need to download the script on pnp detection, execute it and copy the downloaded firmware. Any hints how to achieve that?
Thanks in advance,
Chriss
(//)
If you look at the device template for the PVR-150, you'll see there are references to a set of scripts that are called when the card needs to be configured, and when the card needs to be set up.
Take a look at those to do what you need.
Also, you should work with us to make a package containing any files needed for that template, so that LinuxMCE can install them. This would include the setup scripts as well as the get_dvb_firmware software etc.
-Thom
Thom,
thanks for the hint. I've looked at the other capture cards' templates before - in fact that's how I put together my template so far.
In the meantime I found the get_dvb_firmware script in the kernel source package, however, I still need a few steps to execute it and move files around. I'll create the necessary scripts and see how I can create my own package (found a wiki entry http://wiki.linuxmce.org/index.php/How_to_add_a_new_software_package_to_LinuxMCE).
Cheers,
/Chriss
You can do that, but due to differences in the runtime and build databases, you cannot check it in. We'll need to work together on that.
-Thom
Quote from: chriss on November 16, 2008, 09:07:43 PM
Hi devs,
while trying do dig deeper into the LMCE mysteries I wanted to create plug-and-play templates for some of my devices. One of them is a Pinnacle PCTV 310i DVB-T capture card. It is working great (VDR) for me but it took me some steps to configure it manually (downloading firmware etc.).
I already got a template that detects the card and creates the device (see screenshot below). Even the pop-up asking to configure the card for mythtv is shown :) However, as said before, some manual tweaking was necessary, i.e. I had to download firmware. I used a GPLed script called get_dvb_firmware which is floating around on the internet. Unfortunately I could not find a kubuntu package containing the script. I'm a little stuck now... I need to download the script on pnp detection, execute it and copy the downloaded firmware. Any hints how to achieve that?
Thanks in advance,
Chriss
(//)
Hi Chriss,
The get_dvb_firmware script is part of the dvb-utils package. You can install it with apt-get from the shell;
sudo apt-get install dvb-utils <return>All the best
Andrew
Andrew,
Quote from: totallymaxed on November 18, 2008, 11:26:40 AM
The get_dvb_firmware script is part of the dvb-utils package.
thanks for the suggestion. Seems to make more sense to have this package installed instead of kernel-sources.
I'm on a business trip at the moment so I probably will have time to work on that template on the weekend again.
Bye,
/Chriss
Quote from: totallymaxed on November 18, 2008, 11:26:40 AM
The get_dvb_firmware script is part of the dvb-utils package.
Andrew, according to this file list http://packages.ubuntu.com/gutsy/i386/dvb-utils/filelist the package does not contain the script.
However, since I need to add some of my own stuff I'm wondering what's the best way? Should I create the scripts, package them to a .deb and upload them to the bugtracker? Should it be included in the SVN somehow?
BR
/Chriss
what exactly are your modifications?
br, Hari
Hi Hari,
as stated before, I would need
- script to download and extract firmware (get_dvb_firmware or own script)
- "script" to install firmware (copy it to /lib/firmware)
This could be merged into a single simple script and I think it would be great if this would not require a new package... is there a way to store the script in the template? Would be great...
BR
/Chriss
Quote from: chriss on November 23, 2008, 09:51:48 PM
This could be merged into a single simple script and I think it would be great if this would not require a new package... is there a way to store the script in the template? Would be great...
not that i am aware of.
br, Hari
Thanks hari.
Well, back to the question regarding the alternative: what should I do with the script? There's a wiki page "how to add a new software package" but it is referring to doing some stuff on the build server. IMHO it should be possible to distribute the package without having a new LMCE release, e.g., by creating a .deb
However, do I need to provide a package repository or how can I push both package and source to the official LMCE repos?
bye,
Chriss