Text only | Text with Images

LinuxMCE Forums

General => Users => Topic started by: cg-s on October 31, 2008, 07:11:27 AM

Title: Reading states from EIB
Post by: cg-s on October 31, 2008, 07:11:27 AM
Hi!

First of all, I'm new here, so my name is Christoph and I live in Austria.
Now I'm using a MythTv-System since about 2 years, and it works real good. Now I'm thinking about to change to LinuxMCE, that uses also Myth, but has some nice other features.
In the doco I read that it's not possible with LMCE to read out the states form de EIB. Is that still right

best regards form austria
chris
Title: Re: Reading states from EIB
Post by: hari on October 31, 2008, 09:16:37 AM
heh, noch ein oesi :-)

We have three EIB implementations. Two of them can read the states. You'll find more information in the forums and on the wiki.

best regards,
Hari
Title: Re: Reading states from EIB
Post by: cg-s on October 31, 2008, 10:17:30 AM
Schön das ich nicht der einzige bin...

Well, what do you mean with three implementations?


Chris
Title: Re: Reading states from EIB
Post by: hari on October 31, 2008, 11:36:27 AM
there is the original driver (http://wiki.linuxmce.org/index.php/EIB), there is a new device from CHT (http://wiki.linuxmce.org/index.php/Bash_dce_knx), and there is a driver from guigolum integrating with eibd (see thread in the developers forum).

br, Hari
Title: Re: Reading states from EIB
Post by: cg-s on October 31, 2008, 11:46:52 AM
Thanks a lot!
Title: Re: Reading states from EIB
Post by: neuli on December 05, 2008, 11:31:08 AM
Hy, my name is Jürgen.

I am the next one from (Upper) Austria! Hallo Jungs!

I'm reading this forum for 3 month.

I'm planning to build a house in the next future (2-4 years). I will have a touch on every floor (2-3) (inwall) (video and audio). Also a touch in the kitchen. An LCD/Plasma in each bedroom (also for children (don't have a child yet, planned ;) )). A Plasma AND a beamer in the living room with an amplifier (Dolby 5.1). Audio in bathroom and toilet. EIB/KNX in the whole house!!! VOIP, IP-Cams, IP-doorstation, ...
For EIB there are other home automation hard/software available, for example GIRA Homeserver, ... (That's the preferred method of some people in the KNX-User-Forum, where i'm also reading each day!)

But first of all, I need some information about LinuxMCE and EIB (-integration). Is LinuxMCE capable to substitude the Homeserver? Has LinuxMCE a good visualisation, where you can change floors, switch on/off lights, close/open blinds, event-depending telegramm dispatching, ...
Or should the Homeserver make the work behind (events,...) and let LinuxMCE be only for visualisation/interaction?

Are there other people from Austria, so maybe I can visit and they will show me their home, where LinuxMCE or EIB (or both) are running?

Jürgen
Title: Re: Reading states from EIB
Post by: avajon on December 05, 2008, 12:01:18 PM
hi Jürgen,

i'm from Vienna and i have LMCE and EIB running. But with the 704 Version and with no EIB-Read functions. I want to wait for the next release before i start to integrate the Read function.

best regards
markus
Title: Re: Reading states from EIB
Post by: hari on December 05, 2008, 01:15:14 PM
is hier jetzt oesi treffen oder was? :-)

feedback on the new EIB drivers would be appreciated.

lg vom ex-grazer,
Hari
Title: Re: Reading states from EIB
Post by: vuko on December 05, 2008, 04:15:50 PM
Hi all,

Quote from: hari on December 05, 2008, 01:15:14 PM
is hier jetzt oesi treffen oder was? :-)

looks like :P


Quote from: hari on December 05, 2008, 01:15:14 PM
lg vom ex-grazer,
how could you do that?   :-[

LG
vuko
Title: Re: Reading states from EIB
Post by: hari on December 05, 2008, 04:37:14 PM
Quote from: vuko on December 05, 2008, 04:15:50 PM
Quote from: hari on December 05, 2008, 01:15:14 PM
lg vom ex-grazer,
how could you do that?   :-[
Berlin is a very nice town and I had duties in the German Parliament. But it is not the final destination for my trip :-)

best regards,
Hari
Text only | Text with Images