hello, I have a Asus N2MPV-VM acting as a dedicated core. The external NIC is connected to my cable modem and the internal NIC connected to a Netgear DGS 2208 switch. This setup worked perfectly with MCE 7.04 but after I did a clean install to 7.10 by installing Kbuntu 7.10 AMD and then the 2 cd 7.10 MCE I cannot seem to get the internal NIC to work. The indicator lamp does not light on the internal NIC or on the switch and I just cannot figure out why this internal lan port is inactive under the 7.01 version. In the MCE launch Manager under the view IP Adresses it lists the following info:
External_Iface=eth1
External_mac=00:18:E7:16:F8:07
External_IP= 68:3:33:91
External_Netmask=255.255.240.0
External Dhcp=1
Internal_Iface=eth0
Internal_Mac=00:1B:FC:CB:88:88
Internal_Ip=192.168.80.1
Internal_netmask=255.255.255.0
Gateway=68.3.32.1
DNS1=68.105.28.11
DNS2=68.105.28.12
In the MCE browser under Network Settings Advanced tab I see this:
Advanced | Network settings
EXTERNAL_IFACE eth1
EXTERNAL_MAC 00:18:E7:16:F8:07
EXTERNAL_IP 68.3.33.91
EXTERNAL_NETMASK 255.255.240.0
EXTERNAL_DHCP 1
INTERNAL_IFACE eth0
INTERNAL_MAC 00:1B:FC:CB:88:88
INTERNAL_IP 192.168.80.1
INTERNAL_NETMASK 255.255.255.0
GATEWAY 68.3.32.1
DNS1 68.105.28.11
DNS2 68.105.28.12
Domain Computer name
DHCP server on Core:
Enable DHCP server
Range of IP addresses for Pluto devices: ... - ...
Provide IP addresses for anonymous devices not in Pluto's database.
Range of IP addresses for non-Pluto devices: ... - ...
Number of network adapters: 2
Your core has the following network adapters:
1. External network card eth1
Obtain an IP address from DHCP
Use a static IP address
Core's IP address: ...
Subnet mask: ...
Gateway: ...
Nameserver (DNS) #1: ...
Nameserver (DNS) #2: ...
2. Internal network card eth0
IP address: ...
Subnet mask: ..
The launch manager log shows this:
05 05/23/08 14:09:17.069 =>initialize_Connections() <0x2b39ffc964 b0>
05 05/23/08 14:09:17.258 Opening DB connection.. <0x2b39ffc964b0>
05 05/23/08 14:09:17.285 Successful <0x2b39ffc964b0>
05 05/23/08 14:09:17.286 Running query: "SELECT PK_Device FROM De vice WHERE FK_DeviceTemplate=7" <0x2b39ffc964b0>
05 05/23/08 14:09:17.287 Detected core as device #1 <0x2b39ffc964 b0>
05 05/23/08 14:09:17.287 Running query: "SELECT PK_Device FROM De vice LEFT JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate WHERE FK_De vice_ControlledVia=1 AND FK_DeviceCategory IN (8)" <0x2b39ffc964b0>
05 05/23/08 14:09:17.288 Query: "SELECT PK_Device FROM Device LEF T JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate WHERE FK_Device_Con trolledVia=1 AND FK_DeviceCategory IN (8)" returned no records <0x2b39ffc964b0>
05 05/23/08 14:09:17.288 Running query: "SELECT PK_Device FROM De vice LEFT JOIN DeviceTemplate ON FK_DeviceTemplate=PK_DeviceTemplate WHERE FK_De vice_ControlledVia= AND FK_DeviceCategory IN (2, 3, 5)" <0x2b39ffc964b0>
01 05/23/08 14:09:17.288 Error executing query <0x2b39ffc964b0>
01 05/23/08 14:09:17.288 Statement error <0x2b39ffc964b0>
01 05/23/08 14:09:17.288 Database says: You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'AND FK_DeviceCategory IN (2, 3, 5)' at line 1 Driver says: QMYSQL3: Unable to execute query <0x2b39ffc964b0>
05 05/23/08 14:09:17.288 Trying to reopen DB connection <0x2b39ff c964b0>
the Pluto DHCP log shows this:
/var/log/pluto/PlutoDHCP.log (End)
The DCE router log shows this:
2 05/23/08 14:11:09 /usr/pluto/bin/Spawn_DCERouter.sh (server) Writing Version: 2.0.0.44
1 05/23/08 14:11:09 /usr/pluto/bin/Spawn_DCERouter.sh (server) Starting DCERouter
========== NEW LOG SECTION ==========
1 05/23/08 14:11:09 DCERouter (server) Starting... 1
Fri May 23 14:11:09 MST 2008 Starting
05 05/23/08 14:11:10.809 Socket::ReceiveData 0x792210 failed, byt es left 0 start: 150000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 7 Incoming_Conn Socket 7 127.0.0.1 <0x43806950>
05 05/23/08 14:11:10.809 Socket::ReceiveString2 ReceiveData faile d m_Socket: -1 Incoming_Conn Socket 7 127.0.0.1 <0x43806950>
05 05/23/08 14:11:10.809 TCPIP: Closing connection to -1 (Router Dev #0) 0x792210 m_Socket: -1 <0x43806950>
05 05/23/08 14:11:10.809 Router::RemoveAndDeleteSocket 0x792210 - 1 <0x43806950>
05 05/23/08 14:11:11.327 Loaded plug-in device: 3 master device: 10 -- ./File_Grids_Plugin.so <0x2ab1285a3e80>
05 05/23/08 14:11:11.370 Loaded plug-in device: 4 master device: 27 -- ./General_Info_Plugin.so <0x2ab1285a3e80>
05 05/23/08 14:11:11.387 Loaded plug-in device: 5 master device: 31 -- ./Climate_Plugin.so <0x2ab1285a3e80>
05 05/23/08 14:11:11.403 Loaded plug-in device: 6 master device: 9 -- ./Datagrid_Plugin.so <0x2ab1285a3e80>
05 05/23/08 14:11:11.436 Loaded plug-in device: 7 master device:
This is the fifth Time that i have tried to install 7.01 with out success I even tried the 386 version with no luck, but MCE 704 works flawlessly. I hope that one of one of you MCE wizards can point me in the proper direction....
Thank you for your help
Fillister
Hi,
Did you change any cabling?
It looks to me it looks like you have your ethernet reversed.
eth0 should be your external connection.
eth1 should be your internal DHCP connection.
Hope this helps.