Hello
Sorry about my English, I'm a Portuguese integrator! ;D
I'm trying to use the LinuxMCE with EIB/KNX light control. I have a EIB/KNX - USB gateway, but I have some difficult to config the interface, I already
1. define the devices.
2. define the Lights
3. Import and Update the group Adresses
4. When I try to do On/Off in any device os group adress, the EIB BUS do not receive any message!
I have doubts about config the interface, is necessary install some additional software?
Can someone give me a help, to put working, step by step, the information available on wiki is not very complete!
Thanks
JS
LMCE works only with RS232 interface FT1.2 like this http://www.eibmarkt.com/cgi-bin/eibmarkt.storefront/48214a72005abe02274450f3362b05e0/Product/View/N000250 (http://www.eibmarkt.com/cgi-bin/eibmarkt.storefront/48214a72005abe02274450f3362b05e0/Product/View/N000250)
Right now I'm using a RS232 (serial) with V1.2, device of Siemens 5WG11481AB02.
I check if the group address and the import of the group address are correct, and they are.
I Already Add the lights, and when I force to On or OFF, nothing happens!
What I can do to test step-by-step, and put these working!
??? ??? ???
mickg,
I'm not too sure how well that driver is implemented. From what I can gather, it hasn't been looked at since the pluto days.
If you can get me specs on the protocol, I can see what I can come up with.
Regards,
Dan
That would be great...we really need a working EIB/KNX interface...
Thanks in advance Dan...and you have mail ;)
Hello Dan:
Some news about the driver??
You want some details about the protocol? Exist a lot of information about KNX/EIB protocol on the internet?
If you need some information about it, please send me a information!
I really need put this working!
Regards
JS
Quote from: ddamron on May 08, 2008, 03:33:45 PM
mickg,
I'm not too sure how well that driver is implemented. From what I can gather, it hasn't been looked at since the pluto days.
If you can get me specs on the protocol, I can see what I can come up with.
Regards,
Dan
Quote from: ddamron on May 08, 2008, 03:33:45 PM
If you can get me specs on the protocol, I can see what I can come up with.
hy ddamron,
a good way to start is here:
https://www.auto.tuwien.ac.at/a-lab/software.html (https://www.auto.tuwien.ac.at/a-lab/knx-eib.html)
http://sourceforge.net/projects/knxathome
forum:
http://www.eib-home.de/instabus_eib_fragen_antworten_forum.htm
developer's page
http://www.knx-developer.de/
best regards