following instructions on wiki (totallymaxed?) to set up vdr with NovaT500 but
1... can't find ini files for terrestrial (belmont Emley Moor Sheffield)........or how to create?
2..."invalid command message" on sudo /etc/ini.d/vdr stop
any help would be appreciated,as would any pointers to controlling sky boxes thro' rs232 (next little project)
6200 Nvidia sempron 3k (yes sktA) 2Gb cheap ddr novaT 500 1x o/b nic 1x 10/100 nic
LMCE 7010 B3 hybrid
Linux /command line virgin ;D ;D
just solved q2 ?typo on wiki? ie sudo /etc/init.d/vdr stop
have found example files in dvb utils docs but where to get (or how to build) the specific one i need ?
Quote from: maybeoneday on March 03, 2008, 10:56:27 PM
following instructions on wiki (totallymaxed?) to set up vdr with NovaT500 but
1... can't find ini files for terrestrial (belmont Emley Moor Sheffield)........or how to create?
2..."invalid command message" on sudo /etc/ini.d/vdr stop
any help would be appreciated,as would any pointers to controlling sky boxes thro' rs232 (next little project)
6200 Nvidia sempron 3k (yes sktA) 2Gb cheap ddr novaT 500 1x o/b nic 1x 10/100 nic
LMCE 7010 B3 hybrid
Linux /command line virgin ;D ;D
Hi,
I have just update the wiki page http://wiki.linuxmce.org/index.php/VDR#Configuration (http://wiki.linuxmce.org/index.php/VDR#Configuration) to include a detailed set of instructions for generating a 'channels.conf' for your local DVB-T transmitter. The tuning file for Emley Moor is installed when you install the dvb-utils package... just follow my instructions on the Wiki and substitute 'uk-EmleyMoor' for 'uk-CrystalPalace' in the example scan command.
Hope this helps you get up and running.
All the best
Andrew
Hi Andrew ,
many thanks for your response (and all your efforts in the forums which are very informative) & BRILLIANT wiki -as a windows refugee this sort of detailed howto is very welcome in trying to overcome the daunting learning curves involved in migrating to linux (at least for me).
I am now running 0710 beta4 i386
After following wiki, ui 1 locked on accessing tv, even after reloading router, -after a couple of cold boots , and changing to UI 2, channels appear in both vdradmin web page and in EPG (F5 over "no signal " screen) BUT no live broadcasts....
Can you possibly supply any pointers to how I've managed to bork things up and possibly a cure ?
Where is channels.conf uploaded to , after uploading via the wizard ?
Sorry Andrew-
(hit the post button too early on previous post....did I mention I'm hopeless on a keyboard ?)
thanks in advance,
Ian
Quote from: maybeoneday on March 10, 2008, 08:28:18 PM
Hi Andrew ,
many thanks for your response (and all your efforts in the forums which are very informative) & BRILLIANT wiki -as a windows refugee this sort of detailed howto is very welcome in trying to overcome the daunting learning curves involved in migrating to linux (at least for me).
I am now running 0710 beta4 i386
After following wiki, ui 1 locked on accessing tv, even after reloading router, -after a couple of cold boots , and changing to UI 2, channels appear in both vdradmin web page and in EPG (F5 over "no signal " screen) BUT no live broadcasts....
Can you possibly supply any pointers to how I've managed to bork things up and possibly a cure ?
Where is channels.conf uploaded to , after uploading via the wizard ?
You should be able to use F6 under ui2 to get the 'compass rose' control onscreen then select the upper triangle with if you have a Gyro remote, IR remote or mouse. Then select the channle you want from the UI2 EPG screen.
Alternative use the IR remote to choose the channel number you want... 1 for BBC1... 3 for ITV1.... 80 for BBC News 24 etc etc... as per the UK Freeview channel listings/channel No.s
You can find channels.conf here; /var/lib/vdr/channels.conf
Hi Andrew ,
thanks for speedy response.
Everything was showing as you advised ..rose , channels .epg etc BUT whenever any channel was selected , the screen would freeze, BUT , I took a break, shut the core/hybrid down for an hour , restarted , and hey presto, channels are selecting & viewing ok !!
Do certain combinations hard/softwatre require a truly cold boot , or is it just coincidence?
Could I impose ?...
I'm using windows mce remote , which doesn't appear to work as it might eg no channel selection by numbers..have you any tips/pointers as to checking wether it is working as per spec /configured correctly ?
Also, Ive set up a diskless MD, which won't show TV ....I know there must be a setting somewhere that I'm missing ..can you give me a clue?
Many thanks in advance, your help is greatly appreciated,
Ian