I found a few bugs in the X10 support of the PLM Ruby code.
My opologies to everyone out there trying to use a PLM to control X10.
I have fixed the problem, but before I update the wiki with the new code, I'm going to implement dimming capability to X10.
The X10 Dimming capability will only be 1-way, as the devices do not report status.
However, any transmitted X10 signals on the powerline ARE sensed and reported back to lmce.
In a nutshell:
What will NOT work: local control of a device cannot be sensed.
What WILL work: If you use a REMOTE controller, or a motion sensor, etc, that TRANSMITS commands, they will be received.
HTH, I'll keep you posted.
Best regards,
Dan
Ok, rudimentary X10 dimming has been implemented. I don't know if it works, I don't have an X10 device to test with.
X10 control from an orbiter is now fixed.
Wiki is updated.
http://wiki.linuxmce.org/index.php/Insteon_-_Setting_Up_PLM_Template
all the best!
Dan
your awesome dude. thanks for this.
Not a problem Golgoj4!
Are you using a PLM?
I'd like to know if people are using the PLM, and if so, what problems they encounter.
This feedback will help me diagnose problems, and make the installation easier.
Regards,
Dan