I posted this in the help wanted section but that might just be the wrong place to put it so I post it here:
Hi everyone!
I am looking for the rs-232 "codes" for the LE40M86BD LCD TV made by Samsung. This is its European part number, Don't really know what it is called in the US. I called Samsung here in Sweden and they confirmed that the "EX-LINK" or sometimes called "Service port" 3.5mm phono-jack is indeed a RS-232 port, but they did not have the codes for this.
I have been searching the net for about 5 days now and I found ONE forum page with a guy talking about how he got a hold of the codes for a samsung LCD tv. No were else have I found any info about this.
Why can't Samsung put all this RS-232 info in the manual like Sharp has done so well!
Anyway, I thought you guys might know or could help me find out.
Thanks for Any help I can get!
Best regards
/Dan from Sweden!
Hello Dan,
try the manual for one of their plasmas http://www.samsungforbusiness.com/management/products/PPM42M7HBXXAA_RS232_M6H_M7H_Plasma.pdf (http://www.samsungforbusiness.com/management/products/PPM42M7HBXXAA_RS232_M6H_M7H_Plasma.pdf). I have read that most of the Samsungs understand the same codes
hth
regards
Oliver
Quote from: posde on December 19, 2007, 09:42:22 AM
Hello Dan,
try the manual for one of their plasmas http://www.samsungforbusiness.com/management/products/PPM42M7HBXXAA_RS232_M6H_M7H_Plasma.pdf (http://www.samsungforbusiness.com/management/products/PPM42M7HBXXAA_RS232_M6H_M7H_Plasma.pdf). I have read that most of the Samsungs understand the same codes
hth
regards
Oliver
i got a statement from samsung germany that the rs232 port is only for service maintenance.
It would be great if the codes would work.. it's the only missing feature from the M86/87 series.
best regards,
Hari
I've got a Samsung HLS5087WX/XAA. It's got an RS-232C and a USB "WiseLink". Any chance it can be controlled by LMCE? If only by IR, has that been documented for this model?
Quote from: hari on December 19, 2007, 05:06:36 PM
i got a statement from samsung germany that the rs232 port is only for service maintenance.
It would be great if the codes would work.. it's the only missing feature from the M86/87 series.
Do you have a chance to test the connection using the supplied information?
rgds
Oliver