Hi
I created a cable Box device for a Huawei box. When I was creating the Device I choose Cable Box, added the IR codes, etc. I then setup the device to connect to a TV, a Hitachi, set the inputs to the appropriate HDMI ports, reload regen.
When I clicked the Device scenario for the room using the orbitor, it does nothing, throws an error in the DCErouter.log, see below
23/18 12:39:56.971 Parameter 253(Queue): <0x5e1e9b40>
08 12/23/18 12:39:56.974 Parameter 254(Bypass Event): <0x5e1e9b40>
08 12/23/18 12:39:56.978 Parameter 276(Dont Setup AV): <0x5e1e9b40>
01 12/23/18 12:39:56.983 TTTT Final Sort! <0x86c12b40>
01 12/23/18 12:39:56.983 TTTT Final Sort End! <0x86c12b40>
01 12/23/18 12:39:56.983 TTTT StartMedia - Main function start <0x86c12b40>
01 12/23/18 12:39:56.983 TTTT StartMedia OutputZone begin. <0x86c12b40>
01 12/23/18 12:39:56.983 debug_stream_end MediaStream::MediaStream c1 1001/0xb340f048 source 113 <0x86c12b40>
01 12/23/18 12:39:56.983 TTTT StartMedia OutputZone end. <0x86c12b40>
01 12/23/18 12:39:56.983 TTTT StartMedia OutputZone - MediaStream - Begin <0x86c12b40>
05 12/23/18 12:39:56.983 MediaStream::GetCurrentMediaFile - no file <0x86c12b40>
01 12/23/18 12:39:56.983 TTTT StartMedia - OutputZone - MediaStream - end. <0x86c12b40>
01 12/23/18 12:39:56.983 TTTT StartMedia pMediaStream Start <0x86c12b40>
01 12/23/18 12:39:56.983 TTTT StartMedia - pMediaStream - LoadStreamAttributes begin <0x86c12b40>
05 12/23/18 12:39:56.983 MediaStream::GetCurrentMediaFile - no file <0x86c12b40>
01 12/23/18 12:39:56.983 TTTT StartMedia - pMediaStream - LoadStreamAttributes end <0x86c12b40>
05 12/23/18 12:39:56.983 MediaStream::GetCurrentMediaFile - no file <0x86c12b40>
05 12/23/18 12:39:56.983 Media_Plugin::CheckForAlternatePipes no destination for EA 4 Bedroom (Master) <0x86c
When I check the Media Scenario, for the Device, it shows up as a Cable Radio, not sure if that the issue. Did a query, and see below.
mysql> select Define, Description,IsExternalTransmission,psc_id,psc_batch from MediaType where PK_MediaType=15;
+---------------+-------------+------------------------+--------+-----------+
| Define | Description | IsExternalTransmission | psc_id | psc_batch |
+---------------+-------------+------------------------+--------+-----------+
| np_CableRadio | CableRadio | 1 | 12 | 3000 |
+---------------+-------------+------------------------+--------+-----------+
1 row in set (0.00 sec)
Shouldn't that show up as a CableBox, instead on CableRadio? Would this contribute to the problems I am having?
Which table or view, has the Device Types listed and could I simple update the value to reflect what a Cable Box should read?
See Attached
While I haven't dug in to completely understand the issue I'm going to suggest that np_Cableradio is expecting to be an embedded device. That is to say Cable Radio is an embedded feature of a cable box. I'm not sure why the discrepancy between choice and device in LinuxMCE. Without digging in further that's all I can suggest to look at right now.
Merry Christmas :)
J.
Merry Christmas
Did some testing. What I realized, when I assigned the Cable Box to the room with the raspberry pi md, it will not error out, gives me the appropriate remote. See excerpt from the DCErouter.log. Will play around some more trying different things.
TTTT Final Sort! <0x8c41db40>
01 12/25/18 19:59:34.007 TTTT Final Sort End! <0x8c41db40>
01 12/25/18 19:59:34.007 TTTT StartMedia - Main function start <0x8c41db40>
01 12/25/18 19:59:34.007 TTTT StartMedia OutputZone begin. <0x8c41db40>
01 12/25/18 19:59:34.007 debug_stream_end MediaStream::MediaStream c1 1001/0xb3006650 source 116 <0x8c41db40>
01 12/25/18 19:59:34.007 TTTT StartMedia OutputZone end. <0x8c41db40>
01 12/25/18 19:59:34.007 TTTT StartMedia OutputZone - MediaStream - Begin <0x8c41db40>
05 12/25/18 19:59:34.007 MediaStream::GetCurrentMediaFile - no file <0x8c41db40>
01 12/25/18 19:59:34.007 TTTT StartMedia - OutputZone - MediaStream - end. <0x8c41db40>
01 12/25/18 19:59:34.007 TTTT StartMedia pMediaStream Start <0x8c41db40>
01 12/25/18 19:59:34.007 TTTT StartMedia - pMediaStream - LoadStreamAttributes begin <0x8c41db40>
05 12/25/18 19:59:34.007 MediaStream::GetCurrentMediaFile - no file <0x8c41db40>
01 12/25/18 19:59:34.007 TTTT StartMedia - pMediaStream - LoadStreamAttributes end <0x8c41db40>
05 12/25/18 19:59:34.007 MediaStream::GetCurrentMediaFile - no file <0x8c41db40>
05 12/25/18 19:59:34.007 Media_Plugin::CheckForAlternatePipes no destination for EA 3 Living Room/Family Room <0x8c41db40>
05 12/25/18 19:59:34.007 MediaStream::GetCurrentMediaFile - no file <0x8c41db40>
05 12/25/18 19:59:34.008 MediaStream::GetCurrentMediaFile - no file <0x8c41db40>
05 12/25/18 19:59:34.008 MediaStream::GetCurrentMediaFile - no file <0x8c41db40>
05 12/25/18 19:59:34.008 MediaStream::GetCurrentMediaFile - no file <0x8c41db40>
07 12/25/18 19:59:34.008 Event #21 has no handlers <0xa6c52b40>
07 12/25/18 19:59:34.008 Received Message from 10 (Media Plug-in / Closet/Storage Space) to -1001 (unknown / ), type 2 id 21 Even t:Listening to Media, retry none, parameters: <0xa6c52b40>
07 12/25/18 19:59:34.008 Parameter 27(PK_Room): 7 <0xa6c52b40>
05 12/25/18 19:59:34.008 MediaStream::GetCurrentMediaFile - no file <0x8c41db40>
08 12/25/18 19:59:34.008 Received Message from 10 (Media Plug-in / Closet/Storage Space) to 116 (Digicel EC6106V6 LV / Living Roo m/Family Room), type 1 id 192 Command:On, retry none, parameters: <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 97(PK_Pipe): 1 <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 98(PK_Device_Pipes): <0xa6c52b40>
08 12/25/18 19:59:34.008 Received Message from 10 (Media Plug-in / Closet/Storage Space) to 101 (Generic HDMI-CEC TV / Living Roo m/Family Room), type 1 id 192 Command:On, retry none, parameters: <0xb6130b40>
08 12/25/18 19:59:34.008 Parameter 97(PK_Pipe): 1 <0xb6130b40>
08 12/25/18 19:59:34.008 Parameter 98(PK_Device_Pipes): <0xb6130b40>
08 12/25/18 19:59:34.008 Received Message from 10 (Media Plug-in / Closet/Storage Space) to 101 (Generic HDMI-CEC TV / Living Roo m/Family Room), type 1 id 91 Command:Input Select, retry none, parameters: <0xb6130b40>
08 12/25/18 19:59:34.008 Parameter 71(PK_Command_Input(HDMI 4)): 985 <0xb6130b40>
08 12/25/18 19:59:34.008 Received Message from 10 (Media Plug-in / Closet/Storage Space) to 35 (Windows XP PC/tablet (Horiz) / Ki tchen), type 1 id 242 Command:Set Now Playing, retry none, parameters: <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 3(PK_DesignObj): 77,5418,0,252,0,0 <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 5(Value To Assign): Digicel EC6106V6 LV(CableRadio) <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 9(Text): <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 29(PK_MediaType): 15 <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 41(StreamID): 1001 <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 48(Value): 0 <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 50(Name): <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 103(List PK Device): 116,101,101,,0,0,0 <0xa6c52b40>
08 12/25/18 19:59:34.008 Parameter 120(Retransmit): 0 <0xa6c52b40>
08 12/25/18 19:59:34.009 Received Message from 10 (Media Plug-in / Closet/Storage Space) to 73 (OnScreen Orbiter / Living Room/Fa mily Room), type 1 id 242 Command:Set Now Playing, retry none, parameters: <0xa6c52b40>
08 12/25/18 19:59:34.009 Parameter 3(PK_DesignObj): 77,5418,0,252,0,0 <0xa6c52b40>
08 12/25/18 19:59:34.009 Parameter 5(Value To Assign): Digicel EC6106V6 LV(CableRadio) <0xa6c52b4
I checking at the execute scenarios and I noticed a different between the room that has an MD and the one that just has a TV and cable box.
the execute scenario for the room with the MD has a scenario command, command DCERouter Execute Command #28 PK_CommandGroup (int) 188
the similar execute scenario for the room that this thread is about, has no commands
Pics attached