ok, here goes...
Installed Ubuntu 6.10 Desktop OK
installed all updates OK
installed Linuxmce , Core only, Dedicated - no errors
rebooted - blank screen
ctrl-alt-F1, logged in,
startx started ok.
complained about hal not starting...
opened terminal and did /etc/init.d/dbus restart
avahi failed (nothing connected to second nic yet)
browsed into localhost
setup initial config:
2 rooms, Office(closet) and Dining Room
added interface CM11A
added Light Switch in Dining Room, controlled by CM11a, code E3
quick reload router...
checked log for CM11a:
========== NEW LOG SECTION ==========
1 04/20/07 12:32:11 18 (spawning-device) Starting... 1
1 04/20/07 12:32:11 18 (spawning-device) Found ./CM11A
05 04/20/07 12:32:12.035 Creating child 19 <0xb7ae0930>
05 04/20/07 12:32:12.035 Note: Device manager has attached a device of type 38 that this has no custom event handler for. It will not fire events. <0xb7ae0930>
05 04/20/07 12:32:12.035 Note: Device manager has attached a device of type 38 that this has no custom handler for. This is normal for IR. <0xb7ae0930>
Log for DCERouter:
/var/log/pluto/DCERouter.log
05 04/20/07 12:43:30.785 TCPIP: Closing connection to -1003 (Router Dev #0) 0x8406220 m_Socket: -1 <0x89affba0>
05 04/20/07 12:43:30.785 Router::RemoveAndDeleteSocket 0x8406220 -1003 <0x89affba0>
01 04/20/07 12:43:31.657 Received message type: 1 id: 606 from: 0 going to an empty device list md: 1825 cat: 0 <0x89affba0>
05 04/20/07 12:43:31.708 Socket::ReceiveData 0x8406220 failed, bytes left 0 start: 380000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 109 Incoming_Conn Socket 109 192.168.80.1 <0x89affba0>
05 04/20/07 12:43:31.708 Socket::ReceiveString2 ReceiveData failed m_Socket: -1 Incoming_Conn Socket 109 192.168.80.1 <0x89affba0>
05 04/20/07 12:43:31.708 TCPIP: Closing connection to -1003 (Router Dev #0) 0x8406220 m_Socket: -1 <0x89affba0>
05 04/20/07 12:43:31.708 Router::RemoveAndDeleteSocket 0x8406220 -1003 <0x89affba0>
08 04/20/07 12:43:31.721 Received Message from 15 (App Server / Office) to 15 (App Server / Office), type 1 id 812 Command:Application Exited, parameters: <0x8fc71ba0>
08 04/20/07 12:43:31.721 Parameter 227(PID): 8934 <0x8fc71ba0>
08 04/20/07 12:43:31.721 Parameter 228(Exit Code): 0 <0x8fc71ba0>
Device type 38 is my light switch, been at this for days now...
any advice??
Anybody?? suggestions?? hints?? bump!
Did you choose the correct serial port when you added CM11 in the interfaces section?