Hey all,
Just wondering if anyone has tried using an intel nuc for an MD?
I was going to look at using one as a core, however it would require a USB Ethernet adapter.
Keen to hear others thoughts on this?
Cheers
slampt
Hey ...
i run a usb Adapter as well....
It requires the ASIX driver in most case. I got the apple one.
installed like this:
http://dokuwiki.knallimall.org/de/linuxmce_macmini_2010_4_1/linuxmce_1004_dvd_installer#install_apple_usb_ethernet
ochorocho
Thanks, I might give one a go and see how it fairs.
Should use a lot less power than my current clunker (core2duo)
The only think I was concerned about was the graphics, intel HD 4000.
Cheers
Slampt
i cant tell if ur intel graphics will work.
i tried a intel card once and it worked somehow, but nvidia card worked way better ootb...
This was some time ago.
intel cards might work better nowadays.
Check here for any issues with video compatibility, please report your findings and success/failure to L3xxx as indicated.
http://wiki.linuxmce.org/index.php/1004_Video_Hardware_Compatibility_List#Intel
J.
Hey Guys,
Just borrowed one of these to give it a shot, firstly I tried to PXE boot it as an MD, it unfortunately kernel panics;
Kernel Panic - not syncing: Attempt to kill init!
Pid: 1, comm: init Not tainted 2.6.32-44-generic #98-Ubuntu
Any ideas?
Ok with a little assistance from the Unrecognized Nic wiki entry and the latest src for the e1000e from http://sourceforge.net/projects/e1000/files/?source=navbar I have managed to create a new MD, the NUC boots, and I am presented with Failed to setup X.
I will now try to compile the modules for the intel graphics card HD 4000 :P
Slampt