I installed LMCE on 1004 very function definitely except telephony and intercom I do not have sound on core and MD
thank you for your help
Quote from: hanafi on January 06, 2013, 07:47:37 PM
I installed LMCE on 1004 very function definitely except telephony and intercom I do not have sound on core and MD
thank you for your help
how is the Audio settings on MDs
hi
the sound work great on 3 MD and core but when i place call or intercom no sound .
setting of Md and core is a default card sound
and no ring too in the MD or Core.
please post your /etc/asound.conf
my /etc/asound.conf
pcm.analog_6 {
slave.pcm surround51
slave.rate 48000
slave.channels 6
type route
ttable.0.0 1
ttable.1.1 1
ttable.0.2 1
ttable.1.3 1
ttable.0.4 0.5
ttable.1.4 0.5
ttable.0.5 0.5
ttable.1.5 0.5
}
pcm.analog_8 {
slave.pcm multi
slave.rate 48000
slave.channels 8
type route
ttable.0.0 1.0
ttable.1.1 1.0
ttable.2.2 1.0
ttable.3.3 1.0
ttable.4.4 1.0
ttable.5.5 1.0
ttable.0.6 1.0
ttable.1.7 1.0
ttable.2.6 0.7
ttable.3.7 0.7
ttable.4.6 0.7
ttable.4.7 0.7
ttable.5.6 0.5
ttable.5.7 0.5
}
pcm.analog {
slave.pcm "analog:0,0"
slave.rate 48000
}
!default {
type asym
playback.pcm "plughw:0,0"
capture.pcm "plughw:0,0"
}
you can edit /usr/pluto/templates/asound.conf on core and MD´s and add
pcm.asym_analog {
type asym
playback.pcm "%ANALOG_PLAYBACK_CARD%"
capture.pcm "plughw:%MAIN_CARD%"
}
then reboot the system.
any change stays without sound
post your asound.conf again and simplephone.log
asound.conf
pcm.analog_6 {
slave.pcm surround51
slave.rate 48000
slave.channels 6
type route
ttable.0.0 1
ttable.1.1 1
ttable.0.2 1
ttable.1.3 1
ttable.0.4 0.5
ttable.1.4 0.5
ttable.0.5 0.5
ttable.1.5 0.5
}
pcm.analog_8 {
slave.pcm multi
slave.rate 48000
slave.channels 8
type route
ttable.0.0 1.0
ttable.1.1 1.0
ttable.2.2 1.0
ttable.3.3 1.0
ttable.4.4 1.0
ttable.5.5 1.0
ttable.0.6 1.0
ttable.1.7 1.0
ttable.2.6 0.7
ttable.3.7 0.7
ttable.4.6 0.7
ttable.4.7 0.7
ttable.5.6 0.5
ttable.5.7 0.5
}
pcm.analog {
slave.pcm "analog:0,0"
slave.rate 48000
}
!default {
type asym
playback.pcm "plughw:0,0"
capture.pcm "plughw:0,0"
}
where I can found this file "simplephone.log"
in / Var / log it has nothing it
here my simplephone.conf
[net]
download_bw=0
upload_bw=0
firewall_policy=0
[sip]
sip_port=5061
use_info=0
use_ipv6=0
[sound]
alsadev=asym_analog
playback_dev_id=ALSA: asym_analog
ringer_dev_id=ALSA: asym_analog
capture_dev_id=ALSA: asym_analog
local_ring=/usr/share/sounds/linphone/rings/oldphone.wav
remote_ring=/usr/share/sounds/linphone/ringback.wav
echocancelation=0
[video]
display=0
capture=0
show_local=0
[audio_codec_0]
mime=speex
rate=16000
enabled=1
[audio_codec_1]
mime=speex
rate=8000
enabled=1
[audio_codec_2]
mime=PCMU
rate=8000
enabled=1
[audio_codec_3]
mime=GSM
rate=8000
enabled=1
[audio_codec_4]
mime=PCMA
rate=8000
enabled=1
[video_codec_0]
mime=theora
rate=90000
enabled=1
[video_codec_1]
mime=H263-1998
rate=90000
enabled=1
[video_codec_2]
mime=MP4V-ES
rate=90000
[video_codec_3]
mime=x-snow
rate=90000
enabled=1
[proxy_0]
reg_proxy=sip:dcerouter
reg_identity=sip:200@dcerouter
reg_expires=600
reg_sendregister=1
publish=0
add this to a /etc/asounf.conf
pcm.asym_analog {
type asym
playback.pcm "plughw:0,0"
capture.pcm "plughw:0,0"
}
the log files is on /var/log/pluto/devicenumber_simplephone.log
ok
22_SimplePhone.log
05 01/07/13 10:30:08.991 ^[[33;1mSocket::ReceiveData 0x86263c0 failed, bytes left 0 start: 190000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 6 Command_Impl1 Dev #22^[[0m <0x275bb70>
05 01/07/13 10:30:08.991 ^[[33;1mSocket::ReceiveString2 ReceiveData failed m_Socket: -1 Command_Impl1 Dev #22^[[0m <0x275bb70>
01 01/07/13 10:30:08.991 ^[[31;1mReceive string failed in HandleRequestSocket 18:ReceiveData failed Command_Impl1 Dev #22^[[0m <0x275bb70>
05 01/07/13 10:30:08.991 ^[[33;1mDumping 1 locks^[[0m <0x275bb70>
05 01/07/13 10:30:08.991 ^[[33;1mfinished check for exceptions^[[0m <0x275bb70>
05 01/07/13 10:30:08.991 ^[[33;1mOL: (0x862650c) (>217) MessageQueue Command_Impl.cpp l:852 time: 1:00:00a (1357551008 s) thread: 111770480 Rel: Y Got: Y^[[0m <0x275bb70>
Return code: 2
2 01/07/13 10:30:11 22 (spawning-device) ^[[1;33mDevice requests restart... count=1/50 dev=22^[[1;00m
Mon Jan 7 10:30:11 CET 2013 Restart
========== NEW LOG SECTION ==========
1 01/07/13 10:30:19 22 (spawning-device) ^[[1;00mStarting... 1^[[1;00m
1 01/07/13 10:30:19 22 (spawning-device) ^[[1;00mFound ./SimplePhone^[[1;00m
05 01/07/13 10:30:31.734 ^[[33;1mServer IP: dcerouter^[[0m <0xb7732710>
== ATTEMPT FRESH START ==
1 01/07/13 10:30:33 Spawn_Device.sh 22 (spawning-device) ^[[1;00m8334 Dev: 22; Already Running list: 15,16,18,19,30,33,34,40,52,95,47,49,51,21,122,22,27,120,23,26,39,25,121,^[[1;00m
1 01/07/13 10:30:33 Spawn_Device.sh 22 (spawning-device) ^[[1;00m8334 Device 22 was marked as 'running'. Not starting^[[1;00m
1 01/07/13 10:30:33 Spawn_Device.sh 22 (spawning-device) ^[[1;00m8334 Dev: 22; Exiting because not starting^[[1;00m
05 01/07/13 10:34:14.883 ^[[33;1mSocket::ReceiveData 0x9cd13c0 failed, bytes left 0 start: 80000 1: 0 1b: 0 2: 0 2b: 0 m_Socket: 6 Command_Impl1 Dev #22^[[0m <0x40c8b70>
05 01/07/13 10:34:14.883 ^[[33;1mSocket::ReceiveString2 ReceiveData failed m_Socket: -1 Command_Impl1 Dev #22^[[0m <0x40c8b70>
01 01/07/13 10:34:14.883 ^[[31;1mReceive string failed in HandleRequestSocket 18:ReceiveData failed Command_Impl1 Dev #22^[[0m <0x40c8b70>
05 01/07/13 10:34:14.883 ^[[33;1mDumping 1 locks^[[0m <0x40c8b70>
05 01/07/13 10:34:14.883 ^[[33;1mfinished check for exceptions^[[0m <0x40c8b70>
05 01/07/13 10:34:14.883 ^[[33;1mOL: (0x9cd150c) (>227) MessageQueue Command_Impl.cpp l:852 time: 1:00:00a (1357551254 s) thread: 133376880 Rel: Y Got: Y^[[0m <0x40c8b70>
Return code: 2
2 01/07/13 10:34:16 22 (spawning-device) ^[[1;33mDevice requests restart... count=1/50 dev=22^[[1;00m
Mon Jan 7 10:34:16 CET 2013 Restart
========== NEW LOG SECTION ==========
1 01/07/13 10:34:24 22 (spawning-device) ^[[1;00mStarting... 1^[[1;00m
1 01/07/13 10:34:24 22 (spawning-device) ^[[1;00mFound ./SimplePhone^[[1;00m
05 01/07/13 10:34:29.139 ^[[33;1mServer IP: dcerouter^[[0m <0xb779e710>
== ATTEMPT FRESH START ==
1 01/07/13 10:34:30 Spawn_Device.sh 22 (spawning-device) ^[[1;00m25387 Dev: 22; Already Running list: 15,16,18,19,30,33,34,40,52,95,47,49,51,21,122,22,27,120,23,26,39,25,121,^[[1;00m
1 01/07/13 10:34:30 Spawn_Device.sh 22 (spawning-device) ^[[1;00m25387 Device 22 was marked as 'running'. Not starting^[[1;00m
1 01/07/13 10:34:30 Spawn_Device.sh 22 (spawning-device) ^[[1;00m25387 Dev: 22; Exiting because not starting^[[1;00m
== ATTEMPT FRESH START ==
1 01/07/13 11:23:24 Spawn_Device.sh 22 (spawning-device) ^[[1;00m14212 Dev: 22; Already Running list: 15,16,18,19,30,33,34,52,95,47,49,51,21,^[[1;00m
== FRESH START ==
1 01/07/13 11:23:24 Spawn_Device.sh 22 (spawning-device) ^[[1;00mdevice: 22 ip: 127.0.0.1 cmd_line: SimplePhone^[[1;00m
0 01/07/13 11:23:24 22 (spawning-device) ^[[1;00mEntering 22^[[1;00m
========== NEW LOG SECTION ==========
1 01/07/13 11:23:24 22 (spawning-device) ^[[1;00mStarting... 1^[[1;00m
1 01/07/13 11:23:24 22 (spawning-device) ^[[1;00mFound ./SimplePhone^[[1;00m
05 01/07/13 11:23:25.550 ^[[33;1mServer IP: dcerouter^[[0m <0xb77ac710>
05 01/07/13 11:24:04.373 ^[[33;1mvoid ClientSocket::Disconnect() on this socket: 0x85f23c0 (m_Socket: 6)^[[0m <0xb77ac710>
Return code: 0
2 01/07/13 11:24:04 22 (spawning-device) ^[[1;33mShutting down... count=1/50 dev=22^[[1;00m
Mon Jan 7 11:24:04 CET 2013 Shutdown
== ATTEMPT FRESH START ==
1 01/07/13 11:24:23 Spawn_Device.sh 22 (spawning-device) ^[[1;00m18820 Dev: 22; Already Running list: 15,16,18,19,30,33,34,52,95,47,49,51,21,122,^[[1;00m
== FRESH START ==
1 01/07/13 11:24:23 Spawn_Device.sh 22 (spawning-device) ^[[1;00mdevice: 22 ip: 127.0.0.1 cmd_line: SimplePhone^[[1;00m
0 01/07/13 11:24:23 22 (spawning-device) ^[[1;00mEntering 22^[[1;00m
========== NEW LOG SECTION ==========
1 01/07/13 11:24:23 22 (spawning-device) ^[[1;00mStarting... 1^[[1;00m
1 01/07/13 11:24:23 22 (spawning-device) ^[[1;00mFound ./SimplePhone^[[1;00m
05 01/07/13 11:24:23.879 ^[[33;1mServer IP: dcerouter^[[0m <0xb7752710>
== ATTEMPT FRESH START ==
1 01/07/13 11:24:37 Spawn_Device.sh 22 (spawning-device) ^[[1;00m20515 Dev: 22; Already Running list: 15,16,18,19,30,33,34,52,95,47,49,51,21,122,22,120,23,121,26,25,39,27,^[[1;00m
1 01/07/13 11:24:37 Spawn_Device.sh 22 (spawning-device) ^[[1;00m20515 Device 22 was marked as 'running'. Not starting^[[1;00m
1 01/07/13 11:24:37 Spawn_Device.sh 22 (spawning-device) ^[[1;00m20515 Dev: 22; Exiting because not starting^[[1;00m
05 01/07/13 11:48:08.789 ^[[33;1mGot a reload command from 0 ^[[0m <0x5333b70>
05 01/07/13 11:48:11.133 ^[[33;1mvoid ClientSocket::Disconnect() on this socket: 0x868e3c0 (m_Socket: 6)^[[0m <0xb7752710>
Return code: 0
2 01/07/13 11:49:07 22 (spawning-device) ^[[1;33mShutting down... count=1/50 dev=22^[[1;00m
Mon Jan 7 11:49:07 CET 2013 Shutdown
== ATTEMPT FRESH START ==
1 01/07/13 11:49:17 Spawn_Device.sh 22 (spawning-device) ^[[1;00m28185 Dev: 22; Already Running list: 15,16,18,19,30,33,34,52,95,47,49,51,21,122,27,40,^[[1;00m
== FRESH START ==
1 01/07/13 11:49:17 Spawn_Device.sh 22 (spawning-device) ^[[1;00mdevice: 22 ip: 127.0.0.1 cmd_line: SimplePhone^[[1;00m
0 01/07/13 11:49:17 22 (spawning-device) ^[[1;00mEntering 22^[[1;00m
========== NEW LOG SECTION ==========
1 01/07/13 11:49:17 22 (spawning-device) ^[[1;00mStarting... 1^[[1;00m
1 01/07/13 11:49:17 22 (spawning-device) ^[[1;00mFound ./SimplePhone^[[1;00m
05 01/07/13 11:49:17.343 ^[[33;1mServer IP: dcerouter^[[0m <0xb7728710>
== ATTEMPT FRESH START ==
1 01/07/13 15:01:36 Spawn_Device.sh 22 (spawning-device) ^[[1;00m4039 Dev: 22; Already Running list: 15,16,18,19,30,33,34,40,52,95,47,49,51,21,^[[1;00m
== FRESH START ==
1 01/07/13 15:01:36 Spawn_Device.sh 22 (spawning-device) ^[[1;00mdevice: 22 ip: 127.0.0.1 cmd_line: SimplePhone^[[1;00m
0 01/07/13 15:01:36 22 (spawning-device) ^[[1;00mEntering 22^[[1;00m
========== NEW LOG SECTION ==========
1 01/07/13 15:01:36 22 (spawning-device) ^[[1;00mStarting... 1^[[1;00m
1 01/07/13 15:01:36 22 (spawning-device) ^[[1;00mFound ./SimplePhone^[[1;00m
05 01/07/13 15:01:36.924 ^[[33;1mServer IP: dcerouter^[[0m <0xb77aa710>
05 01/07/13 15:03:17.569 ^[[33;1mvoid ClientSocket::Disconnect() on this socket: 0x80de3c0 (m_Socket: 6)^[[0m <0xb77aa710>
Return code: 0
2 01/07/13 15:03:17 22 (spawning-device) ^[[1;33mShutting down... count=1/50 dev=22^[[1;00m
Mon Jan 7 15:03:17 CET 2013 Shutdown
== ATTEMPT FRESH START ==
1 01/07/13 15:03:36 Spawn_Device.sh 22 (spawning-device) ^[[1;00m12948 Dev: 22; Already Running list: 15,16,18,19,30,33,34,40,52,95,47,49,51,21,122,^[[1;00m
== FRESH START ==
1 01/07/13 15:03:36 Spawn_Device.sh 22 (spawning-device) ^[[1;00mdevice: 22 ip: 127.0.0.1 cmd_line: SimplePhone^[[1;00m
0 01/07/13 15:03:36 22 (spawning-device) ^[[1;00mEntering 22^[[1;00m
========== NEW LOG SECTION ==========
1 01/07/13 15:03:36 22 (spawning-device) ^[[1;00mStarting... 1^[[1;00m
1 01/07/13 15:03:36 22 (spawning-device) ^[[1;00mFound ./SimplePhone^[[1;00m
05 01/07/13 15:03:36.333 ^[[33;1mServer IP: dcerouter^[[0m <0xb76f8710>
== ATTEMPT FRESH START ==
1 01/07/13 15:03:49 Spawn_Device.sh 22 (spawning-device) ^[[1;00m14638 Dev: 22; Already Running list: 15,16,18,19,30,33,34,40,52,95,47,49,51,21,122,22,23,26,121,25,120,27,39,^[[1;00m
1 01/07/13 15:03:49 Spawn_Device.sh 22 (spawning-device) ^[[1;00m14638 Device 22 was marked as 'running'. Not starting^[[1;00m
1 01/07/13 15:03:49 Spawn_Device.sh 22 (spawning-device) ^[[1;00m14638 Dev: 22; Exiting because not starting^[[1;00m
05 01/07/13 17:16:53.091 ^[[33;1mGot a reload command from 0 ^[[0m <0x3303b70>
05 01/07/13 17:16:55.407 ^[[33;1mvoid ClientSocket::Disconnect() on this socket: 0x89d63c0 (m_Socket: 6)^[[0m <0xb76f8710>
Return code: 2
2 01/07/13 17:16:55 22 (spawning-device) ^[[1;33mDevice requests restart... count=1/50 dev=22^[[1;00m
Mon Jan 7 17:16:55 CET 2013 Restart
========== NEW LOG SECTION ==========
1 01/07/13 17:17:03 22 (spawning-device) ^[[1;00mStarting... 1^[[1;00m
1 01/07/13 17:17:03 22 (spawning-device) ^[[1;00mFound ./SimplePhone^[[1;00m
05 01/07/13 17:17:04.469 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:05.469 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:06.470 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:07.471 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:08.472 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:09.473 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:10.475 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:11.476 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:12.476 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:13.477 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:14.478 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
05 01/07/13 17:17:15.480 ^[[33;1mConnect() failed, Error Code 111 (Connection refused))^[[0m <0xb76f4710>
your phones is not registered.
connection refused.
check if phones has password configured and do a quick reload
hi
i delete all the phone and reboot and here my simplephone now
== ATTEMPT FRESH START ==
1 01/07/13 21:04:07 Spawn_Device.sh 131 (spawning-device) ^[[1;00m5816 Dev: 131; Already Running list: 15,16,18,19,30,33,34,52,95,47,49,51,21,25,120,^[[1;00m
== FRESH START ==
1 01/07/13 21:04:07 Spawn_Device.sh 131 (spawning-device) ^[[1;00mdevice: 131 ip: 127.0.0.1 cmd_line: SimplePhone^[[1;00m
0 01/07/13 21:04:07 131 (spawning-device) ^[[1;00mEntering 131^[[1;00m
========== NEW LOG SECTION ==========
1 01/07/13 21:04:07 131 (spawning-device) ^[[1;00mStarting... 1^[[1;00m
1 01/07/13 21:04:07 131 (spawning-device) ^[[1;00mFound ./SimplePhone^[[1;00m
05 01/07/13 21:04:10.319 ^[[33;1mServer IP: dcerouter^[[0m <0xb772b710>
~
~
but not runing and no ring
on linux console
type
asterisk -r enter
sip show peers enter
post result
sip peers
Name/username Host Dyn Forcerport ACL Port Status Realtime
200/200 192.168.80.1 D N 5061 Unmonitored Cached RT
201/201 192.168.80.2 D N 5061 Unmonitored Cached RT
202/202 192.168.80.3 D N 5061 Unmonitored Cached RT
203/203 192.168.80.4 D N 5061 Unmonitored Cached RT
4 sip peers [Monitored: 0 online, 0 offline Unmonitored: 4 online, 0 offline]
you modified asound.conf
on /etc and on /usr/pluto/templates ?
you mean
on core and MD ?
this !!
pcm.asym_analog {
type asym
playback.pcm "plughw:0,0"
capture.pcm "plughw:0,0"
}
yes
I have just made it
are what I reboot?
yes you need to reboot
thanks you
the 3 Md working but no micro phone
and core stay no sound
on MD without mic use alsamixer to check if mic is enable
how audio on core is conected HDMI or stereo ?
audio on core is conected stereo but i never successful HDMI
i have NVIDIA Card GT 430
I will be happy to make it hdmi
please post result off aplay -l for a core
for mic the simplephone use this script to enable mic
/usr/pluto/bin/SoundCards_SetupAudioCapture.sh
in my case i need to edit and change 'Mic' to 'Capture'
#!/bin/bash
# enable mic
amixer set 'Capture' 74% mute cap
amixer set 'Capture' 20dB
aplay -l give me this
**** List of PLAYBACK Hardware Devices ****
card 0: CMI8738 [C-Media CMI8738], device 0: CMI8738-MC6 [C-Media PCI DAC/ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: CMI8738 [C-Media CMI8738], device 1: CMI8738-MC6 [C-Media PCI 2nd DAC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: CMI8738 [C-Media CMI8738], device 2: CMI8738-MC6 [C-Media PCI IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
command aplay -L
default:CARD=CMI8738
C-Media CMI8738, C-Media PCI DAC/ADC
Default Audio Device
front:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
Front speakers
iec958:CARD=CMI8738,DEV=0
C-Media CMI8738, C-Media PCI DAC/ADC
IEC958 (S/PDIF) Digital Audio Output
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=CinemaTM
Microsoft® LifeCam Cinema(TM), USB Audio
Default Audio Device
front:CARD=CinemaTM,DEV=0
Microsoft® LifeCam Cinema(TM), USB Audio
Front speakers
surround40:CARD=CinemaTM,DEV=0
Microsoft® LifeCam Cinema(TM), USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=CinemaTM,DEV=0
Microsoft® LifeCam Cinema(TM), USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=CinemaTM,DEV=0
Microsoft® LifeCam Cinema(TM), USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=CinemaTM,DEV=0
Microsoft® LifeCam Cinema(TM), USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=CinemaTM,DEV=0
Microsoft® LifeCam Cinema(TM), USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=CinemaTM,DEV=0
Microsoft® LifeCam Cinema(TM), USB Audio
IEC958 (S/PDIF) Digital Audio Output
default:CARD=NVidia
HDA NVidia
Default Audio Device
front:CARD=NVidia
HDA NVidia
Front speakers
surround40:CARD=NVidia
HDA NVidia
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia
HDA NVidia
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia
HDA NVidia
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia
HDA NVidia
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia
HDA NVidia
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=NVidia
HDA NVidia
IEC958 (S/PDIF) Digital Audio Output
with this test you can hear something
speaker-test -D plughw:0,0
/usr/pluto/bin/SoundCards_SetupAudioCapture.sh
amixer: Unable to find simple control 'Capture',0
amixer: Unable to find simple control 'Capture',0
post result off amixer
amixer on core
Simple mixer control 'Master',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 25 [81%]
Front Right: Playback 25 [81%]
Simple mixer control '3D Control - Switch',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'PCM',0
Capabilities: pvolume pswitch pswitch-joined cswitch
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 25 [81%] [on] Capture [off]
Front Right: Playback 25 [81%] [on] Capture [off]
Simple mixer control 'Synth',0
Capabilities: pvolume pswitch pswitch-joined cswitch
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 25 [81%] [on] Capture [off]
Front Right: Playback 25 [81%] [on] Capture [off]
Simple mixer control 'Line',0
Capabilities: pvolume pswitch cswitch
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Line-In Mode',0
Capabilities: enum
Items: 'Line-In' 'Rear Output' 'Bass Output'
Item0: 'Line-In'
Simple mixer control 'CD',0
Capabilities: pvolume pswitch cswitch
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 31
Front Left: Playback 25 [81%] [on] Capture [off]
Front Right: Playback 25 [81%] [on] Capture [off]
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined cvolume pswitch pswitch-joined cswitch cswitch-joined
Playback channels: Mono
Capture channels: Mono
Limits: Playback 0 - 31 Capture 0 - 7
Mono: Playback 0 [0%] [off] Capture 0 [0%] [off]
Simple mixer control 'Mic Boost',0
Capabilities: pswitch pswitch-joined cswitch cswitch-joined
Playback channels: Mono
Capture channels: Mono
Mono: Playback [off] Capture [off]
Simple mixer control 'Mic-In Mode',0
Capabilities: enum
Items: 'Mic-In' 'Center/LFE Output'
Item0: 'Center/LFE Output'
Simple mixer control 'Phone',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 7
Mono: Playback 0 [0%] [off]
Simple mixer control 'IEC958 5V',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Copyright',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 In Monitor',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 In Phase Inverse',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 In Select',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 In Valid',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Loop',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Output',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Aux',0
Capabilities: pvolume pswitch cswitch
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: Playback 0 - 15
Front Left: Playback 0 [0%] [off] Capture [off]
Front Right: Playback 0 [0%] [off] Capture [off]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 3
Mono: Playback 2 [67%] [on]
Simple mixer control 'Four Channel Mode',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
you have
Simple mixer control 'Mic',0
and
Simple mixer control 'Mic Boost',0
try
amixer set 'Mic' 74% mute cap
amixer set 'Mic Boost' 20dB
Simple mixer control 'Mic',0
Capabilities: pvolume pvolume-joined cvolume pswitch pswitch-joined cswitch cswitch-joined
Playback channels: Mono
Capture channels: Mono
Limits: Playback 0 - 31 Capture 0 - 7
Mono: Playback 23 [74%] [off] Capture 6 [86%] [on]
amixer: Invalid command!
on my core i have sound for mythtv dvd music all just asterisk no sound no ring
i have already no sound on my core for telecom