Hi,
I just tried the latest 1004-20121215102626939 the install went ok(very well compared to 8.1 :)
Went right away to installing a web orbiter and noticed it doesnt work
Firewall rules are disabled and the orbiter full gen web ok(reboot and reinstall the proxy orbiter didnt help)
On earlier versions of 1004 it loaded the web orbiter ok.
Few repository early versions(few version earlier of 10.04) had small bug related to the movie player
The issue is when for example you start a movie -> close it -> open new movie will bring a black screen and the movie wont start
Playing arround wont help ither but reboot or quick gen will fix it for another single movie then it stack again
Im new to linuxMCE but tried version 8 for few days and its great(the video issue wasnt there) it could be hardware/kernel related
but version 8 worked great, iv also tried to swap two video cards(intel / nvidia) to see if its fixing the video issue(on 1004 but it was the same)
Other issue was that nvidia gforce 620 didnt work on version 8, the os installed ok with the nvidia driver but linuxMCE installer
didnt find it then couldnt load the startX on next startup(with error related to starting graphic card)
Iv noticed that the default root MySQL password is empty i think its best to put something else there :)
I realy like this project.
Thanks for your insights. Ill be sure to bring this up to the other developers. Is there any more information you have on the problems you mentioned?
-Langstonius
Tnx,
Well, i didnt dig in too much yet but following apache logs show
[Wed Dec 19 19:34:11 2012] [error] [client 192.168.1.105] PHP Notice: Undefined index: userlang in /var/www/lmce-admin/inc
lude/utils.inc.php on line 66, referer: 192.168.1.102/lmce-admin/weborbiter.php?installation=1033078&device_id=35
[Wed Dec 19 19:34:11 2012] [error] [client 192.168.1.105] PHP Notice: Undefined index: userlang in /var/www/lmce-admin/inc
lude/utils.inc.php on line 66, referer: 192.168.1.102/lmce-admin/weborbiter.php?installation=1033078&device_id=35
0_web_orbiter.log shows
Attempting to create socket on host 192.168.80.1 port 3461 ... OK.
socket_connect() failed.
Reason: (110) Connection timed out
Closing socket ... OK.
when the orbiter moves from authentication to loading the main gui
It tries to connect to the wronge IP(80.x) The main nic is 192.168.1.102 so it binds to eth0
the install proccess looks for eth1 but fail cause eth1 doesnt exists.
A fast workarround i found is to change eth1 to eth0:0 and that solves the issue.
Hi ranpow
May I ask what your using as an orbiter?
What is your core hardware setup?
Hi sbcc,
Just to update on the web orbiter issue, looks like the install is taking into account that there are two nics
so it configure the internal ip 192.168.80.1 as eth1 insted of eth0:0
Changing it will fix the issue.
Regarding the video freeze on version 10.04, im ussing Gigabyte motherbourd i dont have the exact part no. but ill be happy to post it later
My setup is core/hybrid
Thanks,
ranpow
LinuxMCE (lmce) wants to use 2 nics. It sets up an internal network on the 2nd nic under eth1 with a network address of 192.168.80.1. Most orbiters and MDs (media directors) are located on this internal network. So your orbiters... say your iPad will get an address of say 192.168.80.131 from lmce. You would connect the orbiters running on the iPad to lmce at 192.168.80.1 at port #3461.
SBBS, so i guess the second nic would have to be wireless or nornal connected to a router, but then my iPAD :) will get his IP from the router.
So my first questune would be, in a setup where the 2th nic is wireless How do you configure the extra wifi varbs is it thru the admin panel or directly on host(aka SSH)? then asuming its configured does it acts as DHCP on that wireless LAN as well?
So if i disabled the routers DHCP then connect from iPAD via the wifi router will it still get the IP from linuxMCE.
In any case, as iv noticed befor, 1 nic and 1 virtual IP is ok too cuase wehn it sends the connect to DCE router it looks for 80.1 and finds it even if its virtual(it doesnt leave the host)
So in other words, the orbiter connects to apache on port 80 then start to communictae with DCE with sockets to the orbiter specific port etc..
The orbiter can connect to any of the apache IPs and it will be ok as long as 80.1 is configured somehow.
Hi ranpow,
This appears to be an installation question. Take a look at http://wiki.linuxmce.org/index.php/Network_Setup. This will show you a typical layout. Feel free to browse the wiki. There is a wealth of information there.
To answer your questions;
Any switch or router (wifi or not) installed on eth1 should just pass through. So the dhcp server on that switch should be turned off. If you have a ipad on the network connected to eth1 (192.168.80.1) you should enter the server address 192.168.80.1 and the port into the orbiter config and connect. You may need to setup the orbiter 1st. Follow these directions http://wiki.linuxmce.org/index.php/Web_Orbiter_2.0 which are mostly still relevant. http://wiki.linuxmce.org/index.php/Orbiters has some more information.
You can setup an orbiter outside the internal network. You would need to forward the port used by the orbiter in the web admin page and your outside firewall if needed.
Thanks sbcc, nice wiki's.
you guys are great, this looks realy nice so far. Lots of bugs but im trying to work it out on the hardware i have.
there is an example of how to set up a router as a switch at http://wiki.linuxmce.org/index.php/Linksys_WRT54G (http://wiki.linuxmce.org/index.php/Linksys_WRT54G) if you need it
Thanks techstyle that was exactly what i was looking for.
Ps does anyone have the video issue i mentioned above?
version 1004 not able to play dvd's after first dvd was played?
Quote from: ranpow on December 21, 2012, 09:22:36 AM
Ps does anyone have the video issue i mentioned above?
version 1004 not able to play dvd's after first dvd was played?
Try to drop to a terminal and run:
sudo apt-get install libdvdcss2
Since you say you could play a DVD once, I have no clue what's up, but it is worth a shot.
I allready installed libdvdcss2(its not that)
Maybee its a hardware issue but i tried with two sound cards one is nvidia.
Strange, nobody has issues with movie playing on version 1004?
No... that would be a blocker.
Something is hanging in Xine it sounds like.
Please reboot, then play a dvd... stop it... and play another, then post /var/log/pluto/XX_Xine_Player.log where XX is the MD number.
I expect it will be pretty big. Might pastebin it.
Are you sure it was a DVD? I had an issue like this with an mp4 file. Nothing would play until I killed xine.
yes, it looks like its unstable xine.
Iv now noticed this xine crush as well
05 12/23/12 6:40:23.061 Xine_Player::CMD_Get_Video_Frame() with corresponding stream 0xacc11380. <0xb6ceeb70>
05 12/23/12 6:40:23.324 [ID: 1021] CHAPTER:0 POS:16248 TITLE:0 SUBTITLE:-1 AUDIO:-1 TOTAL:21800 (seek 0) t.c. ctr 1 freq 1, <0xaf6fdb70>
05 12/23/12 6:40:24.342 [ID: 1021] CHAPTER:0 POS:17216 TITLE:0 SUBTITLE:-1 AUDIO:-1 TOTAL:21800 (seek 0) t.c. ctr 1 freq 1, <0xaf6fdb70>
05 12/23/12 6:40:24.401 Xine_Stream::changePlaybackSpeed no running seekers found <0xb0affb70>
05 12/23/12 6:40:24.402 Xine_Player::EVENT_Playback_Completed(streamID=1021) <0xb0affb70>
05 12/23/12 6:40:24.403 Xine_Player::CMD_Stop_Media() with corresponding stream id 1021 0xacc11380. <0xb6ceeb70>
05 12/23/12 6:40:24.403 Xine_Stream::changePlaybackSpeed no running seekers found <0xb6ceeb70>
05 12/23/12 6:40:24.403 Xine_Player::EVENT_Playback_Completed(streamID=1021) <0xb6ceeb70>
05 12/23/12 6:40:24.442 XineStreamEventListener called on non-initialized stream - aborting command <0xb0affb70>
05 12/23/12 6:40:24.481 Closed stream AV with ID=1021 <0xb6ceeb70>
Basicly its very unstable, some movies start some dont, some crush in the middle(with mp4)
Tnx,
01 12/23/12 6:51:06.863 Xine_Player::SendMessageToOrbiter sent message: Cannot read DVD, disk is not readable or DVDCSS library is not installed <0xaf6fdb70>
But DVDCSS is installed and the movie start tp play anyway it just stop in the middle
Maybee related but im not sure, iv noticed it allways crush if you get to the point in movie when you have to choose
Play. chapters etc.. but dont choose(just leave it playing) after 1 minut it allways crush.
That is sort of a generic "I cannot send readable media to the prescribed player" (xine in this case)
dvdcss is just a suggestion for trying to solve the issue. This isn't a read issue, it is a stream issue. Must fix xine... so we must figure out why it breaks.
Please post logs.
Does this happen on every DVD you try?
looks like it but iv only tested few. Ill run extensiveQA and post my finding later.
Maybe unrelated but I have a particular dvd that crashes if you wait to get to the DVD menu and. It sounds similar to what ranpow is reporting. I found that if I go to the orbiter while the dvd is just starting (before it gets to the onscreen menu) and immediately select the first title/chapter, then the movie starts and plays through normally. Could be some funnies with the DVD menu?
Most of my other DVDs work fine, though.