Andrew,
i have two upnp devices
#57 Sonos 3 (Room 4)
#103 SqueezeBox Radio (Room 7)
they both work fine in just playing sounds (or displaying favorites)
But they won't switch the volume.
in media_conf, i have following lines:
Room=4; AudioDev=57; VideoDev=; KeepScreenOnForOSD=no
Room=7; AudioDev=103; VideoDev=; KeepScreenOnForOSD=no
should the volume Control work ?
Marc
Quote from: murcel on October 14, 2012, 07:18:48 PM
Andrew,
i have two upnp devices
#57 Sonos 3 (Room 4)
#103 SqueezeBox Radio (Room 7)
they both work fine in just playing sounds (or displaying favorites)
But they won't switch the volume.
in media_conf, i have following lines:
Room=4; AudioDev=57; VideoDev=; KeepScreenOnForOSD=no
Room=7; AudioDev=103; VideoDev=; KeepScreenOnForOSD=no
should the volume Control work ?
Marc
In Room#'s 3 & 4 what device is receiving the audio commands? If you have no external device like an Amplifier then it would be the AppServer for the MM in each case.
All the best
Andrew
Quote from: totallymaxed on October 16, 2012, 05:09:02 PM
In Room#'s 3 & 4 what device is receiving the audio commands? If you have no external device like an Amplifier then it would be the AppServer for the MM in each case.
All the best
Andrew
Even if its an Logitech Squeezebox and a Sonos Devices? From which MM should i take the appserver?
Quote from: totallymaxed on October 16, 2012, 05:09:02 PM
In Room#'s 3 & 4 what device is receiving the audio commands? If you have no external device like an Amplifier then it would be the AppServer for the MM in each case.
All the best
Andrew
Andrew, there is no MM in the room. For each sonos or logitech i created a seperate room and entArea and assigned it to.
wasn't that correct?
Quote from: murcel on October 18, 2012, 08:09:56 PM
Andrew, there is no MM in the room. For each sonos or logitech i created a seperate room and entArea and assigned it to.
wasn't that correct?
Yes that's correct currently.
Andrew
Quote from: totallymaxed on October 21, 2012, 01:13:30 AM
Yes that's correct currently.
Andrew
Great, so where should i search, if i can't control the volume? All other things are working...
Marc
Quote from: murcel on October 21, 2012, 01:13:25 PM
Great, so where should i search, if i can't control the volume? All other things are working...
Marc
You need to set a MediaConfig line for the Room that each of your SqueezeBoxes/SqueezeSlaves are in. Therefore if you have a SqueezeBox in Room ID#10 you would set the AudioDev to the Dev ID# of the SqueezeBox in that Room (get that from Web Admin obviously)... let's say the Dev ID# for that SqueezeBox is 30. Therefore you would add a line such as the one below;
Room=10: AudioDev=30; VideoDev=; KeepScreenOnForOSD=yes
All the best
Andrew
Quote from: totallymaxed on October 21, 2012, 07:38:17 PM
You need to set a MediaConfig line for the Room that each of your SqueezeBoxes/SqueezeSlaves are in. Therefore if you have a SqueezeBox in Room ID#10 you would set the AudioDev to the Dev ID# of the SqueezeBox in that Room (get that from Web Admin obviously)... let's say the Dev ID# for that SqueezeBox is 30. Therefore you would add a line such as the one below;
Room=10: AudioDev=30; VideoDev=; KeepScreenOnForOSD=yes
All the best
Andrew
Thanks Andrew,
that was what i was saying in the first post. I did it exactly this way, but the volume control is not working.
Marc
Andrew,
can you take a look, why the volume control is not working even i followed all your steps?
Quote from: totallymaxed on October 21, 2012, 07:38:17 PM
You need to set a MediaConfig line for the Room that each of your SqueezeBoxes/SqueezeSlaves are in. Therefore if you have a SqueezeBox in Room ID#10 you would set the AudioDev to the Dev ID# of the SqueezeBox in that Room (get that from Web Admin obviously)... let's say the Dev ID# for that SqueezeBox is 30. Therefore you would add a line such as the one below;
Room=10: AudioDev=30; VideoDev=; KeepScreenOnForOSD=yes
All the best
Andrew
Andrew any idea?
Or should i order the additional service from you?
Any reply would be great
Quote from: murcel on November 04, 2012, 08:38:28 PM
Andrew any idea?
Or should i order the additional service from you?
Any reply would be great
I'll take a look today... but the rate of volume up/down on the Squeezebox's is actually pretty small. Start something playing in one of your Squeezebox zones and then check that the internal volume level of the Squeezebox itself is set to say 50%. Can you hear it now? Is the Squeezebox receiving the stream? If it is you should see the name of the current playing track on its display. Do you?
All the best
Andrew
Quote from: totallymaxed on November 08, 2012, 12:48:54 PM
I'll take a look today... but the rate of volume up/down on the Squeezebox's is actually pretty small. Start something playing in one of your Squeezebox zones and then check that the internal volume level of the Squeezebox itself is set to say 50%. Can you hear it now? Is the Squeezebox receiving the stream? If it is you should see the name of the current playing track on its display. Do you?
Andrew,
thanks for you rreply. Squeezebox is working as expected. It is receiveing the strem and vol up/down works. Only mute is not working.
The device i am talking about is a sonos (device 57), in the past the vol up/down was working, but now not anymore.
Thanks for digging into it.
Quote from: totallymaxed on November 08, 2012, 12:48:54 PM
I'll take a look today... but the rate of volume up/down on the Squeezebox's is actually pretty small. Start something playing in one of your Squeezebox zones and then check that the internal volume level of the Squeezebox itself is set to say 50%. Can you hear it now? Is the Squeezebox receiving the stream? If it is you should see the name of the current playing track on its display. Do you?
Andrew, did you find time to look into the sonos device?
BR
Marc
Quote from: totallymaxed on November 08, 2012, 12:48:54 PM
I'll take a look today... but the rate of volume up/down on the Squeezebox's is actually pretty small. Start something playing in one of your Squeezebox zones and then check that the internal volume level of the Squeezebox itself is set to say 50%. Can you hear it now? Is the Squeezebox receiving the stream? If it is you should see the name of the current playing track on its display. Do you?
All the best
Andrew
Andrew,
can you please tell me the steps on how to properly add the sonos into the system, so that the volume conrol is working?
BR
Murcel
Quote from: murcel on December 12, 2012, 08:27:34 AM
Andrew,
can you please tell me the steps on how to properly add the sonos into the system, so that the volume conrol is working?
BR
Murcel
We're looking at what's causing this and will update the package/device once we understand what's causing it.
All the best
Andrew
Dear Andrew,
today i added another squeezebox radio. But the volume Control/Mute is not working.
#103 Up/Down is working but not Mute
#210 Up/Down is not working Mute is not working
What can i do? Can you remote login?
BR
Marc
Quote from: murcel on December 20, 2012, 11:10:57 PM
Dear Andrew,
today i added another squeezebox radio. But the volume Control/Mute is not working.
#103 Up/Down is working but not Mute
#210 Up/Down is not working Mute is not working
What can i do? Can you remote login?
BR
Marc
Currently 'mute' is only implemented if your Squeezeslave/SB Player is routed through a controlled amplifier eg Denon or similar. The Vol up/down issue in #21 is almost certainly because media_config has an incorrect value for AudioDev in the line that is for that room. Look for a typo or incorrect value in AudioDev.
All the best
Andrew
Quote from: totallymaxed on December 21, 2012, 01:55:24 AM
Currently 'mute' is only implemented if your Squeezeslave/SB Player is routed through a controlled amplifier eg Denon or similar. The Vol up/down issue in #21 is almost certainly because media_config has an incorrect value for AudioDev in the line that is for that room. Look for a typo or incorrect value in AudioDev.
All the best
Andrew
Thanks Andrew,
but there are definitely no typos in it and the room number and device number are defintelly right.
So room is 4
The squeezebox is device 210
there are NO other device in the room
Room=4; AudioDev=210; VideoDev=; KeepScreenOnForOSD=no
should be all, right?
Quote from: totallymaxed on December 21, 2012, 01:55:24 AM
Currently 'mute' is only implemented if your Squeezeslave/SB Player is routed through a controlled amplifier eg Denon or similar. The Vol up/down issue in #21 is almost certainly because media_config has an incorrect value for AudioDev in the line that is for that room. Look for a typo or incorrect value in AudioDev.
All the best
Andrew
Dear Andrew,
can you have a look?
Everything seems to be right.
BR
Murcel