Hi guys,
I have bought Danfoss' new z-wave (Danfoss Type ID 014G0001) thermostats for all my radiators, but I cant control they though LinuxMCE :'(
The devices has been added successful to LinuxMCE and are shown as Standard Thermostats (based on Device template # 1754), and and data such as battery status is shown just fine in LinuxMCE and a test of my FlexControll Smoke Dector is firering of the Fire scenario, so I think that the basic Zwave is working...
However, I'm unable to set the temperature using the test buttons such as the "72 deg." Button on the climate device page.
Has anyone had success using this brand new z-wave devices with LinuxMCE 8.10?
Please help me out :)
Here is a dump of my Z-wave controller log:
========== NEW LOG SECTION ==========1
09/23/11 16:01:58 33 (spawning-device) Starting... 11
09/23/11 16:01:59 33 (spawning-device) Found /usr/pluto/bin/ZWave01
09/23/11 16:01:59.126 TranslateSerialUSB pci0000:00/0000:00:1d.1+2 result /dev/ttyACM0 <0xb70f26c0>01
09/23/11 16:01:59.130 ERROR! Out of frame flow!! <0xb68f0b90>05
09/23/11 16:01:59.131 Creating child 34 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 1820 that this has no custom event handler for. It will not fire events. <0xb70f26c0>
05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 1820 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 77 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 78 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 79 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 80 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 81 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 82 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 4 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 35 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 1922 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 1922 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 66 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 55 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 55 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 67 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 55 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 55 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 68 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 55 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 55 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.131 Creating child 70 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 55 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 55 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05 09/23/11 16:01:59.131 Creating child 71 <0xb70f26c0>05
09/23/11 16:01:59.131 Note: Device manager has attached a device of type 55 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.132 Note: Device manager has attached a device of type 55 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.132 Creating child 72 <0xb70f26c0>05
09/23/11 16:01:59.132 Note: Device manager has attached a device of type 55 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.132 Note: Device manager has attached a device of type 55 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.132 Creating child 36 <0xb70f26c0>05
09/23/11 16:01:59.132 Note: Device manager has attached a device of type 1945 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.132 Note: Device manager has attached a device of type 1945 that this has no custom handler for. This is normal for IR. <0xb70f26c0>05
09/23/11 16:01:59.132 Creating child 69 <0xb70f26c0>05
09/23/11 16:01:59.132 Note: Device manager has attached a device of type 1945 that this has no custom event handler for. It will not fire events. <0xb70f26c0>05
09/23/11 16:01:59.132 Note: Device manager has attached a device of type 1945 that this has no custom handler for. This is normal for IR. <0xb70f26c0>01
09/23/11 16:01:59.134 ERROR! Out of frame flow!! <0xb68f0b90>01
09/23/11 16:01:59.134 ERROR! Out of frame flow!! <0xb68f0b90>01
09/23/11 16:01:59.134 ERROR! Out of frame flow!! <0xb68f0b90>01
09/23/11 16:01:59.134 ERROR! Out of frame flow!! <0xb68f0b90>01
09/23/11 16:01:59.134 ERROR! Out of frame flow!! <0xb68f0b90>01
09/23/11 16:01:59.134 ERROR! Out of frame flow!! <0xb68f0b90>01
09/23/11 16:01:59.134 ERROR! Out of frame flow!! <0xb68f0b90>01
09/23/11 16:01:59.134 ERROR! Out of frame flow!! <0xb68f0b90>01
09/23/11 16:01:59.134 ERROR! Out of frame flow!! <0xb68f0b90>01
09/23/11 16:01:59.262 ZWave Version: 2.31 <0xb68f0b90>01
09/23/11 16:01:59.371 Home id: 0x00092a4c, our node id: 1 <0xb68f0b90>01
09/23/11 16:01:59.483 SerAppV:2,r67,Manf 0,Typ 1,Prod 1 <0xb68f0b90>05
09/23/11 16:01:59.590 Got reply to GET_SUC_NODE_ID, node: 1 <0xb68f0b90>05
09/23/11 16:02:00.646 Error: ZW_SEND failed, removing job after three tries <0xb68f0b90>05
09/23/11 16:02:02.171 Finished building node list: <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 1 basic: 0x2 generic: 0x2 specific: 0x1 pluto: 1945 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 2 basic: 0x1 generic: 0x1 specific: 0x1 pluto: 1945 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 3 basic: 0x4 generic: 0xa1 specific: 0x7 pluto: 55 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 4 basic: 0x4 generic: 0xa1 specific: 0x7 pluto: 55 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 5 basic: 0x4 generic: 0xa1 specific: 0x7 pluto: 55 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 6 basic: 0x4 generic: 0xa1 specific: 0x7 pluto: 55 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 7 basic: 0x4 generic: 0xa1 specific: 0x7 pluto: 55 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 8 basic: 0x4 generic: 0xa1 specific: 0x7 pluto: 55 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 11 basic: 0x4 generic: 0x8 specific: 0x4 pluto: 4 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 12 basic: 0x4 generic: 0x8 specific: 0x4 pluto: 4 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 13 basic: 0x4 generic: 0x8 specific: 0x4 pluto: 4 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 14 basic: 0x4 generic: 0x8 specific: 0x4 pluto: 4 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 15 basic: 0x4 generic: 0x8 specific: 0x4 pluto: 4 <0xb68f0b90>05
09/23/11 16:02:02.171 Node: 16 basic: 0x4 generic: 0x8 specific: 0x4 pluto: 4 <0xb68f0b90>05
09/23/11 16:02:32.187 Error: ZW_SEND failed, removing job after three tries <0xb68f0b90>05
09/23/11 16:04:39.366 Error: ZW_SEND failed, removing job after three tries <0xb68f0b90>05
09/23/11 16:06:28.654 Error: ZW_SEND failed, removing job after three tries <0xb68f0b90>05
09/23/11 16:07:11.987 Error: ZW_SEND failed, removing job after three tries <0xb68f0b90>05
09/23/11 16:14:42.770 Error: ZW_SEND failed, removing job after three tries <0xb68f0b90>
Hari wake up
Work to do
http://heating.danfoss.com/PCMPDF/Z_wave_commands_VDFNN202_teamcent.pdf
I need a unit for testing..
Hi Hari,
Quote from: hari on September 25, 2011, 01:31:12 PM
I need a unit for testing..
Can you use my setup for testing? ssh or something?
/Jones
ssh should work
Hi, please let us know if there is something ;-) I also desire a remote radiator valve solution. This seems perfect.
Enable zwave debug logging, redo the test, send me the
Log and the exact timestamp of your test
set temperature command now works, just tested with the unit. Be aware that it sleeps, so the new setpoint is not set until the unit wakes up. It also supports a schedule, but I did not yet test that.
Quote from: Domodude on March 16, 2012, 10:24:14 AM
Waking up an old thread.... Set temp works, does the unit have a way of reading the temperature? And, is there a list somewhere of z-wave codes? Finally, does it work with Dianemo S (Andrew?)?
Yes it does. We provided Hari with a Living Connect TRV to allow him to work directly with the hardware. I believe he is still planning to add some additional support for TRV profiles etc.
Andrew
Quote from: Domodude on March 16, 2012, 10:24:14 AM
Waking up an old thread.... Set temp works, does the unit have a way of reading the temperature? And, is there a list somewhere of z-wave codes? Finally, does it work with Dianemo S (Andrew?)?
afaicr you can't read out temps, but I'd need to check to say for sure.
unfortunately it does not seem to support the multilevel sensor command class... so no temp readouts or reports, just the setpoint.
I'm trying to get a danfoss unit (014G0002) to work too. I'm new to LinuxMCE and zwave in general. I don't understand how I'm supposed to setup it, but currently it doesn't work.
I'm using an Aeon Labs Z-Stick S2, and I have the Danfoss unit too, and of course a PC where LinuxMCE is installed. Is it sufficient to control the thermostat ? (the wizard girl talks about a "master controller", I'm getting lost at that point). I've tried to include the thermostat with the z-stick button (unplugged the stick, press the button, and then the button on the thermostat). However, the little antenna and bell are still blinking on the thermostat, looks like a bad sign.
And how am I supposed to set things up in LinuxMCE? I see two "standard thermostat" (though I included only one, but multiple times during various tests) in the web page, but any action done there has no result (even after waiting an hour or so). When I try to see the log (in "advanced" section of the thermostat), it says it can't find the file.
Anyone knows what I need to do ?
Thanks in advance,
Youen.
PS: before installing LinuxMCE, I tried with open zwave too, with no success either. People there said it's because the device goes to sleep too soon which prevents communication. Don't know much more :-(
to include the unit without "dirty" ticks you need an inclusion controller in addition to a PC dongle and run SIS mode. You'll then use the inclusion controller (usually a hand held z-wave remote) to include the danfoss. The controller will notify the PC dongle about this and LinuxMCE is able to set up the proper configuration/association.
(the dirty trick would be to wake the unit up somehow, e.g by (tripple) pressing the buttons, and so on. I'd need to consult the manual for further instructions)
The z-stick s2 does have a built-in inclusion controller, right? Or is it something else I need?
I happen to have another PC controller too, would it help to use both at the same time ? The z-stick for inclusion, while the other controller is on the PC? (because I must unplug the z-stick to put it in inclusion mode). Not sure what I'm saying makes sense?
Do I need to pair those controllers or something?
If it can help, here is some technical documentation from the manufacturer: heating.danfoss.com/PCMPDF/Z_wave_living_connect_VDHMB202.pdf
yes, you can pair your stick with the other controller. What you're saying makes sense. The z-stick would stay on the PC and you'd use the other controller for inclusion. That way LinuxMCE can talk to the danfoss when you're including it.
Hi hari,
Thanks for your help with this issue. However, it appears the problem comes from the firmware version of my devices: version 3.02 is only compatible with the Danfoss Link, according to this post (among others): forum.fibaro.com/viewtopic.php?p=5971
So I'm currently trying to exchange them or get my money back. Obviously, I won't be able to return my two PC controllers which I have bought from another reseller.
So for anyone reading this, be cautious as these Danfoss devices have the same reference (014G0002) as other devices that are working correctly, but the firmware version makes them compatible ONLY with the Danfoss Link (wall controller, not controllable from a PC). At least that's what I've learned so far.
good to know, thank you very much
I can buy there on the german Ebay, for an interesting price, but whats up with this firmware issue?
Is there a way to check before buying?
Regards,
Anton
PS This the Ebay link : http://www.ebay.de/itm/Danfoss-Living-Connect-Heizkorperthermostat-mit-Z-Wave-Funktechnologie-014G0002-/310473634679?pt=Systemkomponenten_Heizung&var&hash=item4849abb377&_uhb=1#ht_2101wt_809 (http://www.ebay.de/itm/Danfoss-Living-Connect-Heizkorperthermostat-mit-Z-Wave-Funktechnologie-014G0002-/310473634679?pt=Systemkomponenten_Heizung&var&hash=item4849abb377&_uhb=1#ht_2101wt_809)
Edit:
I see that Danfoss has made a windows application, to make the Danfoss RA-Plus-W independant. Perhaps this tool is also usable on the Living Connect?
Site (In Dutch) : http://www.ezhome.nl/alle-merken/danfoss/danfoss-softwarepakket.html (http://www.ezhome.nl/alle-merken/danfoss/danfoss-softwarepakket.html)