LinuxMCE Forums

General => Installation issues => Topic started by: willow3 on September 11, 2011, 09:29:28 PM

Title: [SOLVED] Sound and video problems with 810 rc1
Post by: willow3 on September 11, 2011, 09:29:28 PM
Hi,

Experiencing several problems with a snapshot from October 2010 I installed rc1. I have an MD with a geforce 9300 that worked out of the box earlier. Now, I did not get any sound nor video. Starting with the sound I got the following:

sambahelper@moon35:~$ aplay -l      
aplay: device_list:217: no soundcards found...


sambahelper@moon35:~$ lspci -v
00:08.0 Audio device: nVidia Corporation MCP79 High Definition Audio (rev b1)
       Subsystem: nVidia Corporation MCP79 High Definition Audio
       Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
       Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
       Capabilities: <access denied>
       Kernel driver in use: HDA Intel
       Kernel modules: snd-hda-intel


The only thing I have done is to upgrade alsa to 1.0.23 (which is what I was using before).

As for video:

sambahelper@moon35:~$ grep -i "x driver" /var/log/Xorg.0.log
(II) NVIDIA dlloader X Driver  195.36.15  Thu Mar 11 22:01:49 PST 2010


This is the version I used before.

Does anyone know what has happened since last year that could explain this behavior? Any logs I should examine?

regards


Title: Re: Sound and video problems with 810 rc1
Post by: Rukus on September 16, 2011, 09:15:32 PM
Willow3,

Has this been resolved?

Title: Re: Sound and video problems with 810 rc1
Post by: bongowongo on September 17, 2011, 11:38:09 AM
I do not understand wich version you installed.
Title: Re: Sound and video problems with 810 rc1
Post by: willow3 on September 17, 2011, 04:54:15 PM
No, I haven't been able to resolve this one. Just for clarification: The UI2 works, but I can not play any video media. Neither does the sarah video stream show up during setup.

I installed the  LinuxMCE-8.10-final.iso  from the release directory.

regards
Title: Re: Sound and video problems with 810 rc1
Post by: willow3 on September 17, 2011, 05:18:33 PM
*hmm* a couple of restarts of the MD and the sound and video was back. I thought that kind of solution was reserved to the windows community ;-)
Title: Re: Sound and video problems with 810 rc1
Post by: edbroni on September 21, 2011, 02:28:12 AM
Quote from: willow3 on September 17, 2011, 05:18:33 PM
*hmm* a couple of restarts of the MD and the sound and video was back. I thought that kind of solution was reserved to the windows community ;-)

I try the same but didn“t work to me.