Hi,
my rock solid 7.10 Core started to crawl.... DCERouter keeps restarting, everything is so slow, main Orbiter works for a few minutes and then it goes back to startup procedure.... I've tried to figure out, what is causing the problems, but couldn't find good reason (I'm not experienced Linux user)...
DCERouter shows several interesting entries, the main that caught up my attention was that SQL queries took long time. I've run mysqlcheck and everything seems fine... I'm confused and would kindly ask for any opinion or pointer where to start checking things... As said I suspect mysql, a lot of errors I get with mythbackend (I don't use it anymore, have tried to disable MythPlugin but no change)...
Thanks in advance,
regards,
Bulek.
Did you add an external USB drive?
How large is your media collection?
How much free diskspace do you have?
Quote from: posde on May 10, 2011, 11:18:50 PM
Did you add an external USB drive?
How large is your media collection?
How much free diskspace do you have?
1. I didn't add external drive - it did detect new (but empty) Window share.
2. not sure - pretty large
3. disk usage is at 64%.
Do I understand right, that leaving Core to finish 1. or 2. would help ? Situation seems better now.. But is it normal that during 1. or 2. DCERoouter keeps restarting ?
Thanks in advance,
regards,
Bulek.
Quote from: bulek on May 10, 2011, 10:51:25 PM
Hi,
my rock solid 7.10 Core started to crawl.... DCERouter keeps restarting, everything is so slow, main Orbiter works for a few minutes and then it goes back to startup procedure.... I've tried to figure out, what is causing the problems, but couldn't find good reason (I'm not experienced Linux user)...
DCERouter shows several interesting entries, the main that caught up my attention was that SQL queries took long time. I've run mysqlcheck and everything seems fine... I'm confused and would kindly ask for any opinion or pointer where to start checking things... As said I suspect mysql, a lot of errors I get with mythbackend (I don't use it anymore, have tried to disable MythPlugin but no change)...
Thanks in advance,
regards,
Bulek.
I experienced similar problems when I had an HD slowly on the way out. I did not determine it was the HD until i ran 'top' and checked the %wa, which was abnormally high (40% - 80%). I then installed 'sysstat' and gleaned that there were extremely long times between a request for data and when the request was completed. Based on all this, i determined i had a disfunctional drive as SMART status also essentially said 'your on borrowed time'.
HTH
golgoj4
Thanks for responses,
it seems quiet now and working ok. Maybe there was just a huge amount of work that needed to be done... I remember similar situations from the past, but none with such obvious exposure...
Thanks for hint, will check HD.
Regards,
Bulek.
Quote from: bulek on May 11, 2011, 05:32:40 PM
Thanks for responses,
it seems quiet now and working ok. Maybe there was just a huge amount of work that needed to be done... I remember similar situations from the past, but none with such obvious exposure...
Thanks for hint, will check HD.
Regards,
Bulek.
Hi,
I'm back with same problems after some time of being OK. I get a lot of "Query failed: mysql server has gone away" or "query xxxx took xxxxmsecs". On of the Orbiters crashed whenever I tried to go into Media Audio list. I also get weird warnings in /var/log/monit.log for not being aberl to read stat for drive etc...
I've performed short test with smartctl, but no error appeared.
I've tried to recreate Orbiter, but doesn't help. I wonder if I can somehow renew media content in mysql base (wipe out, and reread again all media files) ?
Any other advice how to clean this mess a little bit ?
Thanks,
regards,
Bulek.
Hi,
I've made a step further. I've checked disks with long offline test with smartctl and everything seems fine....
I've tried to repeat crash several times and it seems like Dataplugin is causing problems (or probably something in media database)...
When I press Audio button on main Orbiter menu I get black screen and Orbiter then restarts...
I have this in DCERouter's log:
Quote
08 06/22/11 7:09:47.378 Received Message from 20 (Main OnScreen Orbiter / Living Room/Family Room) to 10 (Media Plug-in / Living Room/Family Room), type 1 id 74 Command:Bind to Media Remote, retry none, parameters: <0xaeffab90>
08 06/22/11 7:09:47.383 Parameter 2(PK_Device): <0xaeffab90>
08 06/22/11 7:09:47.383 Parameter 3(PK_DesignObj): <0xaeffab90>
08 06/22/11 7:09:47.383 Parameter 8(On/Off): 0 <0xaeffab90>
08 06/22/11 7:09:47.383 Parameter 39(Options): <0xaeffab90>
08 06/22/11 7:09:47.383 Parameter 45(PK_EntertainArea): 1 <0xaeffab90>
08 06/22/11 7:09:47.383 Parameter 63(PK_Text_Synopsis): <0xaeffab90>
08 06/22/11 7:09:47.383 Parameter 159(PK_Screen): <0xaeffab90>
08 06/22/11 7:09:47.400 Received Message from 20 (Main OnScreen Orbiter / Living Room/Family Room) to 6 (Datagrid Plug-in / Living Room/Family Room), type 1 id 35 Command:Populate Datagrid, retry none, parameters: <0xaeffab90>
08 06/22/11 7:09:47.400 Parameter 4(PK_Variable): 0 <0xaeffab90>
08 06/22/11 7:09:47.400 Parameter 5(Value To Assign): <0xaeffab90>
08 06/22/11 7:09:47.400 Parameter 10(ID): 1 <0xaeffab90>
08 06/22/11 7:09:47.400 Parameter 15(DataGrid ID): resetav_20 <0xaeffab90>
08 06/22/11 7:09:47.400 Parameter 38(PK_DataGrid): 30 <0xaeffab90>
08 06/22/11 7:09:47.400 Parameter 39(Options): 1 <0xaeffab90>
08 06/22/11 7:09:47.400 Parameter 40(IsSuccessful): 1 <0xaeffab90>
08 06/22/11 7:09:47.400 Parameter 44(PK_DeviceTemplate): 0 <0xaeffab90>
08 06/22/11 7:09:47.400 Parameter 60(Width): 7 <0xaeffab90>
08 06/22/11 7:09:47.400 Parameter 61(Height): 6 <0xaeffab90>
08 06/22/11 7:09:47.539 Received Message from 20 (Main OnScreen Orbiter / Living Room/Family Room) to 6 (Datagrid Plug-in / Living Room/Family Room), type 1 id 34 Command:Request Datagrid Contents, retry none, parameters: <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 10(ID): 2 <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 15(DataGrid ID): resetav_20 <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 32(Row): 0 <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 33(Column): 0 <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 34(Row count): 6 <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 35(Column count): 7 <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 36(Keep Row Header): 0 <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 37(Keep Column Header): 0 <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 49(Add Up-Down Arrows): 1 <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 73(Seek): <0xaeffab90>
08 06/22/11 7:09:47.539 Parameter 74(Offset): 0 <0xaeffab90>
....
08 06/22/11 7:09:55.393 Received Message from 20 (Main OnScreen Orbiter / Living Room/Family Room) to 6 (Datagrid Plug-in / Living Room/Family Room), type 1 id 35 Command:Populate Datagrid, retry none, parameters: <0xaeffab90>
08 06/22/11 7:09:55.393 Parameter 4(PK_Variable): 0 <0xaeffab90>
08 06/22/11 7:09:55.393 Parameter 5(Value To Assign): <0xaeffab90>
08 06/22/11 7:09:55.393 Parameter 10(ID): 4 <0xaeffab90>
08 06/22/11 7:09:55.393 Parameter 15(DataGrid ID): MediaFile_20 <0xaeffab90>
08 06/22/11 7:09:55.393 Parameter 38(PK_DataGrid): 63 <0xaeffab90>
08 06/22/11 7:09:55.393 Parameter 39(Options): 4||||1,2|0|2|0 | 2 | <0xaeffab90>
08 06/22/11 7:09:55.393 Parameter 40(IsSuccessful): 1 <0xaeffab90>
08 06/22/11 7:09:55.393 Parameter 44(PK_DeviceTemplate): 0 <0xaeffab90>
08 06/22/11 7:09:55.393 Parameter 60(Width): 1 <0xaeffab90>
08 06/22/11 7:09:55.393 Parameter 61(Height): 8 <0xaeffab90>
....
01 06/22/11 7:10:24.396 Socket::ReceiveData-a 0x99e87f0 failed ret 0 <0xaeffab90>
01 06/22/11 7:10:24.397 Socket 0x99e87f0 failure waiting for response to message from device 6 type 1 id 35 <0xaeffab90>
01 06/22/11 7:10:24.397 Plugin 6 stopped responding <0xaeffab90>
07 06/22/11 7:10:26.075 Event #12 has no handlers <0xb33c7b90>
07 06/22/11 7:10:26.075 Received Message from 22 (Xine Player Main / Living Room/Family Room) to -1001 (unknown / ), type 2 id 12 Event:Playback Completed, retry none, parameters: <0xb33c7b90>
07 06/22/11 7:10:26.075 Parameter 4(MRL): <0xb33c7b90>
07 06/22/11 7:10:26.075 Parameter 9(Stream ID): 0 <0xb33c7b90>
07 06/22/11 7:10:26.075 Parameter 37(With Errors): 0 <0xb33c7b90>
07 06/22/11 7:10:27.316 Event #12 has no handlers <0xab5b2b90>
07 06/22/11 7:10:27.316 Received Message from 25 (MPlayer Player / Living Room/Family Room) to -1001 (unknown / ), type 2 id 12 Event:Playback Completed, retry none, parameters: <0xab5b2b90>
07 06/22/11 7:10:27.316 Parameter 4(MRL): <0xab5b2b90>
07 06/22/11 7:10:27.316 Parameter 9(Stream ID): 0 <0xab5b2b90>
07 06/22/11 7:10:27.316 Parameter 37(With Errors): 0 <0xab5b2b90>
07 06/22/11 7:10:33.398 Event #9 has no handlers <0x99cfbb90>
07 06/22/11 7:10:33.399 Received Message from 581 (BM_motion_living_00 / ) to -1000 (unknown / ), type 2 id 9 Event:Sensor Tripped, retry none, parameters: <0x99cfbb90>
07 06/22/11 7:10:33.399 Parameter 25(Tripped): 1 <0x99cfbb90>
01 06/22/11 7:10:44.808 debug_stream_end MediaStream::~MediaStream c1 1010/0x9af3ad0 <0xb6bcf6c0>
01 06/22/11 7:10:44.809 debug_stream_end MediaStream::~MediaStream c1 1009/0x7b7735b8 <0xb6bcf6c0>
08 06/22/11 7:11:16.058 Received Message from 11 (Telecom Plug-in / Living Room/Family Room) to 17 (Asterisk / Living Room/Family Room), type 1 id 922 Command:Send Asterisk Status, retry retry, parameters: <0x9dbf6b90>
and also one on MD in living room (this time on Video button)
Quote
08 06/22/11 7:50:36.521 Received Message from 793 (OnScreen Orbiter / Office) to 6 (Datagrid Plug-in / Living Room/Family Room), type 1 id 35 Command:Populate Datagrid, retry none, parameters: <0x5ddfab90>
08 06/22/11 7:50:36.521 Parameter 4(PK_Variable): 0 <0x5ddfab90>
08 06/22/11 7:50:36.521 Parameter 5(Value To Assign): <0x5ddfab90>
08 06/22/11 7:50:36.522 Parameter 10(ID): 2 <0x5ddfab90>
08 06/22/11 7:50:36.522 Parameter 15(DataGrid ID): MediaFile_793 <0x5ddfab90>
08 06/22/11 7:50:36.522 Parameter 38(PK_DataGrid): 63 <0x5ddfab90>
08 06/22/11 7:50:36.522 Parameter 39(Options): 5||||1,2|0|13|0 | 2 | <0x5ddfab90>
08 06/22/11 7:50:36.522 Parameter 40(IsSuccessful): 1 <0x5ddfab90>
08 06/22/11 7:50:36.522 Parameter 44(PK_DeviceTemplate): 0 <0x5ddfab90>
08 06/22/11 7:50:36.522 Parameter 60(Width): 1 <0x5ddfab90>
08 06/22/11 7:50:36.522 Parameter 61(Height): 20 <0x5ddfab90>
...
01 06/22/11 7:51:05.528 Socket::ReceiveData-a 0x8190b90 failed ret 0 <0x5ddfab90>
01 06/22/11 7:51:05.596 Socket 0x8190b90 failure waiting for response to message from device 6 type 1 id 35 <0x5ddfab90>
01 06/22/11 7:51:05.596 Plugin 6 stopped responding <0x5ddfab90>
It seems that Datagrid plugin doesn't respond or at least not in the right time... Is it something wrong in database?
Any other advice how to solve this ?
Do I have any option to debug this more deeply ?
Thanks in advance,
regards
i'm just throwing this out there, not really telling you where the problem is because i'm not sure.
I had a raid setup (not lmce) that keep degrading because of a failed drive. I ran smart reports and test a few times and got positive results, but the drive was actually bad. I was able to rebuild the array twice After a reboot but not the 3rd time. After I replaced the drive I was able to rebuild and everything work fine.
I've heard other people say similair things. I also worked at a web host company that had so little faith in smart that they didn't even bother to turn it on. They would just replace the drive at the first sign of failure.
Just throwing it out there....