Hi All,
Having a few issues after the 0.23 update - wondering if anyone can help.
I can watch live TV, but only for a minute or two. After that it crashes to the error "video frame buffering failed too many times".
Using a HDhomerun on a Hybrid. Was working fine until the upgrade from 0.22 to 0.23.
I tried deleting and reading the cards, rescanning channels just in case (100% signal btw). Reload/Reboot. No change.
Checked the mythtv backend logs and see this error a lot, assuming it might be the cause?
2010-05-28 23:47:02.143 MainServer::HandleVersion - Client speaks protocol version 56 but we speak 50!
Does this means I have some backend/front end mismatch?
I dumped a few more lines in pastebin if this makes sense to anyone:
http://pastebin.com/R0wYpxEr
Any ideas?
Cheers,
WR
Quote2010-05-28 23:47:02.143 MainServer::HandleVersion - Client speaks protocol version 56 but we speak 50!
This indicates your pluto_mythtv_plugin is the wrong version. (hasn't been updated)
Maybe try installing it manually.
HTH
Tim
Thanks Tim,
I tried:
sudo apt-get install -f pluto-mythtv-plugin?
And get is this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
pluto-mythtv-plugin is already the newest version.
The following packages were automatically installed and are no longer required:
libx264-79 libmath-round-perl
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 4 not upgraded.
"pluto-mythtv-plugin is already the newest version"
Does this mean it is already correct or is there another way to install the plugin?
EDIT: just realised it appears to be the client which is 56, and the backend which is 50?
Can I run sudo apt-get install mythtv-backend or will that break it further?
EDIT 2: Tried sudo apt-get install mythtv-backend, no change... grrr.
Anyone got any suggestions? Guess I might have to reinstall...
Cheers,
WR
what type of tuner card do you have?
wombiroller
jump into the irc and lets fix this issue
Thanks
Mandingo
Hey theteju - as above using a HDhomerun on a Hybrid.
Thanks Mandingo. I'll try and track you down :-)
wombiroller:
I have had the same messages in different mythtv versions in lmce. The solution has always been very simple ..... leave it alone.
I come back to it after an hour or so and it just works. Not really a fix but it has worked for me and others.
http://forum.linuxmce.org/index.php?topic=9857.0
Barney
Quote from: b4rney on June 01, 2010, 06:18:03 PM
wombiroller:
I have had the same messages in different mythtv versions in lmce. The solution has always been very simple ..... leave it alone.
I come back to it after an hour or so and it just works. Not really a fix but it has worked for me and others.
http://forum.linuxmce.org/index.php?topic=9857.0
Barney
Thx b4rney. It hasn't fixed it for me I am afraid. I have been trying off and on for ~2 weeks... regular as clockwork :(
This probably isn't going to be helpful, but just thought I'd mention it in case it helps us with the bigger picture.
I see this error message if I start myth, and the initial channel is one that is not currently playing any shows e.g. BBC3 during the day. However, if I change the channel straight away (before the error comes up), I don't see the error.
nah - thanks, but it was all screwed up. I went to watch a recording today and every recording since the upgrade to 0.23 seems to have switched, half way through the recording - to another channel! Weird.
Anyway - I just downloaded a new snapshot and am half-way through the setup wizard... hopefully that will be the end of it :)
Quote from: wombiroller on May 28, 2010, 04:08:37 PM
Hi All,
Having a few issues after the 0.23 update - wondering if anyone can help.
I can watch live TV, but only for a minute or two. After that it crashes to the error "video frame buffering failed too many times".
Using a HDhomerun on a Hybrid. Was working fine until the upgrade from 0.22 to 0.23.
I tried deleting and reading the cards, rescanning channels just in case (100% signal btw). Reload/Reboot. No change.
Checked the mythtv backend logs and see this error a lot, assuming it might be the cause?
2010-05-28 23:47:02.143 MainServer::HandleVersion - Client speaks protocol version 56 but we speak 50!
Does this means I have some backend/front end mismatch?
I dumped a few more lines in pastebin if this makes sense to anyone:
http://pastebin.com/R0wYpxEr
Any ideas?
Cheers,
WR
I had this error when I was screwing around with things I shouldn't, and it was due to me telling LMCE not to use sda1. Evidently it is very particular about where it records. It looks like your issue is different, but thought I would throw it out there. Could watch tv for a minute, then it would throw that error. I am also using the hdhomerun.
Thx l3mce. Yeah I had not changed the recording locations. Anyway - I have installed the snapshot from the 1st June. While I am still working through some issues trying to get everything up and running, the HDhomerun is now working with no crashes. Yay! :)